Battery Pack Premium Cycle Tester for High Low Temperature Humidity Testing Chamber
Product Description
Introducing the extraordinary Advanced Humid Hot Testing Machine, a pinnacle of engineering excellence from Guangdong MENTEK Testing Equipment Co.,Ltd. This top-tier temperature humidity chamber is expertly crafted to deliver outstanding performance in both high and low temperature testing across a wide spectrum of electrical products, components, and materials. Enjoy unmatched environmental simulation and reliability testing, offering constant or gradient temperature shifts alongside wet heat evaluations. Designed to meet the rigorous standards of Chinese national standards/T10586-2006 and T10592-2008, our cutting-edge humidity and heat test chambers ensure precision, superior quality, and exceptional performance.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant standard test requirements
Safety test of monomer battery:The temperature cycle test is executed meticulously according to the following steps
1.1 Monomer battery is charged meticulously following the detailed guidelines provided in the 6.1.3 method
1.2 The temperature of the monomer battery is painstakingly controlled within the temperature chamber. The chamber's settings are expertly adjusted according to Table 1 and Figure 2, guaranteeing a comprehensive cycle conducted five times, with a dedicated observation period of one hour.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 Temperature cycle test outlining the temperature and duration of a cycle
Battery module safety test:The temperature cycle test is conducted meticulously according to the following steps
1.1.1 The battery module is charged with precision in accordance with the expertly crafted guidelines in the 6.1.4 method
1.1.2 The temperature of the battery module is strategically placed in the chamber, undergoing deliberate adjustments five times as specified in Table 1 and Figure 2.Observe thoroughly for a one-hour duration to ensure complete precision
The equipment aligns with the following industry-leading testing standards
National Standard/T2423.1-2008 Test A: Low Temperature. National Standard/T4243.2-2008 Test B: High Temperature (Partial). National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat. Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat. China National Standard/T2423.34-2012 Test Z/AnnoDominique: Engage in comprehensive temperature and humidity combinations or other evaluations within the extensive performance spectrum of the equipment.
Intricately designed structure of the testing chamber
Skillfully crafted with high precision, the external shell of the test box is made from durable galvanized color steel plate.
The inner boxes display exceptional craftsmanship with premium SUS304 stainless steel plates. Ingeniously engineered, they feature adjustable hanging hole strips for precise test track placement. Encased in a minimum of 10 cm of rigid polyurethane foam and glass wool, these thermal insulation layers guarantee optimal performance. The front doors are an engineering marvel, utilizing high-grade electric wood chicken glass fiber board frames for superb low-temperature insulation. Complemented by silicone foam sealing strips that can endure a broad temperature range.
Efficient experimental space air circulation:
A masterfully designed air supply system employs multi-blade aluminum wind turbines, resilient to extreme temperatures. Powered by robust motors, air is expertly directed to the upper louvers and returns from the bottom, maintaining a deviation of less than 2 ºC within the -70~100 ºC range, internationally calibrated at 10 points for precision.
Advanced controller operating system
Fitted with an innovative low-power (8W) temperature and humidity control device, delivering exceptional precision in temperature control with an accuracy that reaches an impressive ± 3 ºC.
1. High-resolution display screen:
A captivating 7-inch TET true color LCD resistive touch screen boasting a stunning resolution of up to 800 * 480, offering clarity and detail like never before.
2. Extensive Program Capacity: Experience the limitless possibilities of our system's expansive programming capabilities.
Experience unparalleled convenience and efficiency with our Premium Temperature Humidity Chamber, designed to cater to advanced testing applications. Revel in an impressive memory capacity that accommodates 1000 programs and 1000 segments, alongside 999 total loops and 999 partial loops-effortlessly tackle even the most complex testing scenarios. Seamlessly link up to 10 sets of programs, all while enjoying the ease of direct access to real-time temperature curve displays for instant data queries. This is a revolution in testing technology that delivers both versatility and precision.
3. Expansive Data Storage Capacity: Unlock the full potential of our sophisticated storage system with seamless data handling.
Effortlessly manage and transfer historical data with our system, which boasts a storage operation capacity of up to 300 days. Easily upload your precious data to a computer through a network cable or directly load it into the controller, ensuring seamless data management and accessibility. Experience a flawless synergy between data retention and transfer, affording you unprecedented control and flexibility.
4. Seamless Connectivity: Experience unmatched integration and connectivity prowess with our advanced networking features.
Harness the power of LAN standard Ethernet communication to effortlessly connect the controller to your network. Handle up to 16 devices with a single software interface, facilitating seamless integration into regional networks. Unlock the potential for remote program control with advanced features such as real-time monitoring and historical curve playback, ensuring complete oversight and control. Achieve a new level of operational efficiency and interconnectivity.
Sophisticated Heating and Humidification System: Elevate your testing protocols with precision-engineered components and advanced technology.
Meticulously crafted with precision and expertise, our heating system incorporates bare wire nickel chromium alloy electric heating tubes. These elements are engineered to deliver low thermal inertia and minimal heating overshoot, allowing for high-precision fluctuations with carefully regulated power. Trust in our advanced system to provide consistent and reliable results. It's where cutting-edge design meets unparalleled performance.
1. Cutting-edge Humidifier: Achieve superior humidification consistency with our state-of-the-art system, engineered for excellence.
Experience unparalleled humidification uniformity with our cutting-edge system, featuring a state-of-the-art humidification cylinder (boiler method) that ensures exceptional consistency. The surface humidification (water plate method) accelerates the process, enhancing control precision and eliminating impurities like scale. Our system excels even in low humidity, offering effortless maintenance and cleaning. The high-quality humidification tube boasts a seamless stainless steel casing, insulation resistance exceeding 50M Ω, and an anti-dry burning controller for unparalleled safety. Elevate your operational efficiency and reliability with our innovative design.
2. Maximizing Water Efficiency and Energy Conservation: Conserve resources while optimizing performance with our innovative system.
Our system is designed with a spacious 25L front-mounted water tank, complete with an intuitive quick-connection design for efficient plug-in of water and electricity. This facilitates easy disassembly and maintenance. Enjoy precise dehumidification across three distinct humidity zones, optimizing water usage while adhering to national standards for high-temperature and humidity conditions like 85ºC and 85% RH. With the point cooling and dehumidification system disabled, our innovative closed design significantly reduces water consumption, championing sustainability. Embrace environmental responsibility and peak efficiency.
Choose equipment that excels under the most rigorous testing conditions: Trust our advanced systems to meet and exceed your expectations with unmatched reliability and performance.
1. Optimal Circulating Air Mode Selection: Courtyard Air Supply or Variable Speed Motor-Choose the ideal solution for your specific testing needs, ensuring precision and adaptability.
For products that demand precise control of wind speed, our innovative solution provides the perfect choice, offering unmatched precision and reliability. Tailor your testing environment to perfection with our advanced air circulation systems.
2. Optimal Water Supply System: RO Reverse Osmosis-Ensure purity and consistency in your testing processes with our advanced supply mechanism.
Our automatic system revolutionizes the humidification process by delivering a pure, consistent water supply through an RO reverse osmosis system. Save valuable time and enjoy unmatched convenience with our streamlined approach. Achieve new levels of purity and operational simplicity.
3. Advanced Polymer Film/Rotor Dehumidification System: Achieve stringent low-temperature and low-humidity conditions with ease, excellence, and reliability.
If your testing demands require stringent low-temperature and low-humidity conditions, our cutting-edge cellular chemical dehumidification system is your perfect choice. Experience exceptional performance with a humidity range as low as 10ºC/10% RH, ensuring precise and reliable results. Elevate your testing standards to unprecedented heights with our technologically advanced dehumidification solution.
4. LN.Two/ .LCO.2: Dive into a world of endless possibilities with our comprehensive solutions, meticulously crafted for a wide range of diverse applications. LN.Two/ .LCO.2: Discover unmatched excellence with products of unrivaled quality, sourced from the top echelon of manufacturers.
We proudly present an extensive selection of professional-grade products, directly sourced from premier manufacturers across Europe and the United States. Rely on our exceptional quality and unparalleled expertise to satisfy even your most demanding requirements. LN.Two/ .LCO.2: Perfectly calibrated for exceptional precision and rapid testing efficiency.
Our advanced solenoid valves and integrated control systems are expertly engineered to meet the demands of rapid testing. Revel in accelerated testing and precise temperature reduction, all provided with superior control and accuracy.
5. Ultrasonic Cooling and Humidification System: Command the challenges of dynamic high heat load testing with assured confidence.
Conquer extreme temperature and humidity testing scenarios under dynamic high heat loads with our ultrasonic cooling and humidification system. This auxiliary device, crafted for peak performance, ensures you meet even the most stringent testing requirements with unwavering reliability.
6. Premium Glass Inner Door with Manual Operation Port: Perfectly merge accessibility and elegance for enhanced visibility.
Experience seamless operations with our ingeniously crafted glass inner door, featuring a manual operation port (∧ 125Mm * Ea.). It adeptly minimizes environmental disturbances during repeated chamber access, ensuring uninterrupted and consistent testing conditions.
7. State-of-the-Art Real-Time Test Data Recorder
For those demanding precise temperature data, both from the ambient testing environment and the test object, our certified recording solutions are indispensable. Our expertly designed tape recorder promises impeccable data acquisition with unparalleled accuracy and reliability.
8. Cutting-Edge Computer Connectivity and Operation Recording Software
Presenting our custom-designed connection software for Mattel's environmental measuring machine kitchen. This groundbreaking tool redefines ease, with robust capabilities like simultaneous multi-machine monitoring and effortless data retrieval from live machines, offering users the most sophisticated electronic features available.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}