Advanced Electronics Testing Equipment for 3C Vibration Testing Tool Test Device
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber by Guangdong MENTEK Testing Equipment Co., Ltd, a true marvel in the realm of environmental simulations, crafted with the utmost versatility and precision. This state-of-the-art chamber is meticulously engineered to execute a spectrum of high and low-temperature tests across a vast array of electrical components, diverse products, parts, and materials. Whether your testing requirements involve constant, gradient, rapid fluctuation temperatures, or wet heat assessments, MENTEK's advanced chambers are designed to not only meet but to exceed the esteemed Chinese national standards T10586-2006 and T10592-2008. This ensures a level of reliability and performance that is truly unmatched, setting a benchmark in the industry.
| M-series vibration testing system |
| Technical parameters of 4-ton vibration table body |
| Sinusoidal thrust |
4000kgf |
N×M
Allowable partial load moment |
>500 |
| Random thrust |
4000kgf |
Equivalent mass of moving parts |
34/27kg |
(6ms)
Impact thrust |
8000kgf |
Load connection point |
16 |
| Frequency Range |
DC-2,800Hz |
Countertop screw size (standard) |
M10 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*150mm;8*300mm |
| Impact displacement |
63.5mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
500kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
370mm |
(L×W×H)
Size (no packaging) |
1336mm×860mm×1178mm |
| First order resonant frequency |
2400/2200Hz |
Shaking table weight (no package) |
2470kg |
| Technical parameters of power amplifier |
|
| |
Technical parameters of fan |
| Maximum output power |
40KVA |
Fan power |
15KW |
| Signal to noise ratio |
>65dB |
Air volume |
1.36m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.059kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
200mm |
| System protection |
|
(L×W×H)
Size (no packaging) |
1050mm×897mm×1970mm |
(L×W×H)
Size (no packaging) |
550mm×800mm×1850mm |
Weight (no packaging) |
320kg |
| Amplifier weight (without packaging) |
620kg |
|
|
| System working environment requirements |
Purchase configuration |
| temperature |
0-40ºC |
sliding table |
Vertical expansion of the table |
| humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3AC,380V±10%,50Hz,65KAV |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
|
Note:
1. The chamber's external dimensions are precisely determined by the heating and cooling rate, ensuring adaptability to varied testing scenarios.
2. Features a highly efficient water cooling type system, with water temperature ranging from 10~28 ºC and a water pressure of 0.1~0.3Mpa, ensuring optimal cooling performance and energy efficiency.
3. The chamber can be enhanced with the function of dampness and heat for added versatility, accommodating a wider range of testing conditions.
4. An optional dry air blowing system is available for customized needs, offering tailored solutions to specific testing requirements.
5. Includes an optional liquid nitrogen function capable of achieving an impressive 30 ºC/min for rapid cooling, catering to urgent testing demands.
6. All listed loads are standard, but the chamber can be custom-designed according to specific customer requirements, ensuring personalized and precise testing solutions.
The equipment meets the following testing standards
Our avant-garde testing equipment by Guangdong MENTEK rigorously adheres to a comprehensive array of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. It is noteworthy that it also complies with China National Standard/T2423.34-2012 Test Z/AnnoDominique, thereby supporting a broad spectrum of temperature and humidity scenarios within its extraordinary performance capabilities, assuring consistency and excellence in testing outcomes.
Structure of the testing chamber
The testing chamber's formidable structure showcases an outer shell crafted from premium galvanized color steel plate, offering exceptional durability and protection against environmental impacts.
Internally, the chambers are lined with SUS304 stainless steel plates featuring adaptable hanging hole strips for flexible configurations. Each chamber is equipped with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are seamlessly connected using high-quality electric wood chicken glass fiber board frames, delivering superior low-temperature insulation. The silicone foam door sealing strip, ingeniously designed with dual channels, exhibits outstanding temperature resistance, ensuring efficiency and performance throughout the testing process.
Experimental space air circulation:
Harness the power of a sophisticated air supply system that transforms your testing experience. Our chamber features high and low-temperature resistant, multi-blade aluminum wind turbines, expertly driven by motors. These turbines create a harmonious airflow, circulating through upper louvers and returning from the bottom. The results? Impeccably uniform temperatures, with a precision of less than 2 ºC, spanning an extraordinary range of -70~100 ºC. Evaluated at a global standard of 10 points, this system guarantees consistent and reliable test outcomes that meet international excellence.
Controller Operating System
Engineered to perfection, the system incorporates an avant-garde, low-power (8W) temperature and humidity control device. This ensures astounding precision, maintaining a temperature control accuracy of ±3 ºC. Empowering users with unrivaled control and stability, it transforms operations into a seamless experience.
1. High Resolution Screen:
Immerse yourself in a world of vivid detail with our 7-inch TET true-color LCD resistive touch screen. Featuring an impressive resolution of up to 800 * 480, it offers crystal-clear visibility that ensures ease of use and elevates user experience to new heights.
2. High Program Capacity:
Designed with expansive memory, this system effortlessly accommodates 1000 programs with 1000 segments, supports 999 total and partial loops, offers 10 program links, and provides real-time temperature curve displays. This enhances operational efficiency and data management, making queries and analysis an effortless endeavor.
3. High Data Storage Capacity:
Unleash the power of seamless data management with the ability to transfer a treasure trove of historical data spanning up to 300 days! Choose the ease of uploading via hard disk or network cable to your computer, or load directly into the controller for uninterrupted access. This offers a seamless integration with our advanced systems, ensuring you are always in control.
4. Seamless Connectivity:
Achieve supreme control with our state-of-the-art controller, featuring LAN-standard Ethernet communication for a streamlined workflow. Seamlessly manage an impressive 16 devices from a single software platform. Our outflow interface ensures smooth local network integration, empowering you with remote program management, real-time monitoring, and effortless access to historical data.
Heating and Moisture Control System
Elevate your heating efficiency with our pioneering bare wire nickel-chromium alloy electric heating tubes. Expertly crafted for low thermal inertia, they offer impeccable temperature control. Paired with cutting-edge power controls, this system delivers optimal heating performance, tailored to your testing essentials.
1. Advanced Humidification System:
Transform your testing with our state-of-the-art humidification technology. Our sophisticated humidification cylinder, using a reliable boiler method, ensures unmatched moisture uniformity. For fast, accurate control, our water plate surface humidification offers unparalleled speed and precision, effortlessly eliminating impurities like scale. Especially effective in low humidity dyeing applications, it provides effortless maintenance. Constructed from seamless stainless steel, our humidification tube boasts insulation resistance exceeding 50M Ω, with a robust anti-dry burning controller enhancing safety.
2. Water Efficiency and Energy Conservation Maximized:
Unlock the potential of our innovative front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for seamless water and power management. Effortlessly disassemble and clean to maintain precision. Achieve meticulous dehumidification control across three distinct humidity zones, adhering to stringent national standards for high temperature and humidity conditions at 85 º C and 85% RH. Our advanced sealed design, which disables point cooling and dehumidification systems, dramatically reduces water usage, endorsing sustainable operations.
Invest in equipment meticulously engineered to withstand the most demanding testing environments, offering unmatched reliability and delivering exceptional performance.
1. Choose the Circulating Air Mode: Opt for Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution offers precision and adaptability, ensuring peak performance.
2. Optimal Water Supply System: RO Reverse Osmosis
When it comes to precise humidification, our cutting-edge equipment guarantees an uninterrupted flow of pure water through an automated production process, offering unparalleled convenience and efficiency tailored to your needs.
3. Advanced Polymer Film/Rotor Dehumidification System: A marvel of modern engineering designed to deliver optimal dehumidification performance.
For demanding long-term testing in environments with low temperatures and humidity, our advanced cellular chemical dehumidification system is your go-to solution. It expertly accommodates a wide humidity range down to 10 º C/10% RH or even lower, surpassing the most stringent standards.
4. LN.Two/ .LCO.2: A dual-component system engineered for precision.
Immerse yourself in a world of premium professional products that promise nothing but the best. These items boast an extensive and diverse selection of specifications, meticulously sourced from the most prestigious manufacturers across Europe and the United States. This ensures that you receive products of top-notch quality, epitomizing excellence and reliability. LN.Two/ .LCO.2: This coupled system stands as a paragon of engineering, offering unparalleled precision and reliability. It defines excellence in performance, setting a benchmark in technological advancement.
Harness the power of our superior solenoid valves and cutting-edge control systems to swiftly meet your pressing testing demands. With rapid thermal acceleration and meticulous temperature regulation, these systems ensure precision and efficacy, elevating your testing processes to new heights.
5. State-of-the-Art Ultrasonic Cooling and Humidification System: Engineered for optimal performance, this system is adept at managing substantial heat loads efficiently and effectively.
For those challenging scenarios involving dynamic testing of significant heat loads under conditions of elevated temperature and humidity, our pioneering ultrasonic cooling and humidification system is expertly designed to tackle these demands. Use it as a supplementary component to achieve unparalleled performance and reliability.
6. Integrate a Glass Inner Door for Manual Operation Access: This innovative and eco-conscious design significantly reduces environmental impact, enhancing the accuracy and reliability of testing procedures.
To significantly reduce environmental impact during frequent testing or object movement, our state-of-the-art design facilitates manual operations with a glass inner door (∧ 125Mm * Ea.). This leading-edge feature remarkably decreases disruptions caused by frequent door openings, thus enhancing testing fidelity and precision.
7. Cutting-Edge Real-Time Test Data Collection and Recording: Engage with the forefront of modern technology through our advanced system, meticulously crafted to capture and record test data with unprecedented precision and speed. This feature guarantees access to accurate and reliable data at every phase of your testing journey.
Our cutting-edge tape recorder embodies the pinnacle of precision and reliability. Designed for environments where accuracy is paramount, it excels in the simultaneous recording of a multitude of temperature metrics. Surpassing rigorous industry standards, it ensures unmatched operational expertise and precision.
8. Advanced Computer Connection Operation Recording Software: Elevate your operational capabilities with our sophisticated software, seamlessly integrating computer connectivity for comprehensive recording operations. It enhances functionality and optimizes machine integration, bringing your processes to new levels of efficiency.
Exclusively engineered for Mattel's environmental measurement machine suite, our groundbreaking connection software revolutionizes the user experience. With enhanced features, enjoy seamless multi-machine monitoring, rapid data retrieval from operational units, and premium electronic attributes, making usability exceptionally straightforward and intuitive.
Innovative Structural Technology: Enter a realm where innovation merges with structural excellence, offering groundbreaking design that redefines modern perceptions. This technology is celebrated not only for its durability but also for its ability to transform the landscape of structural design.
1. Our Company's Premier Hardware Equipment: Delve into an extraordinary selection of German and Taiwanese machinery, featuring the acclaimed AMADA AIRS.-255NT Punching system. Outfitted with advanced carbon oxide and argon welders, each model represents the zenith of precision and innovation. Master the Autodesk Inventor 3D applications for sheet metal design, setting new benchmarks in manufacturing excellence.
Explore our distinguished selection of German and Taiwanese imported machinery, showcasing the renowned AMADA AIRS.-255NT Punching system. Equipped with cutting-edge carbon oxide and argon welders, each piece exemplifies precision and innovation. Discover the extensive capabilities of Autodesk Inventor 3D software for sheet metal design, virtual assembly, and disassembly, marking a new era of manufacturing excellence.
2. The shell, meticulously crafted from high-quality galvanized steel, is renowned for its exceptional durability. Enhanced with a sophisticated electrostatic powder spray baking paint finish, it offers enduring protection and a visually appealing aesthetic.
Three.. Our inner box is meticulously crafted with premium imported SUS #304 stainless steel, featuring full argon arc welding that effectively prevents air leakage in high-temperature and humidity environments. With rounded corners that ensure efficient condensate drainage, it enhances overall performance and reliability.
Revolutionary Refrigeration System Technology: Embrace a new era of refrigeration with our pioneering 3D-optimized management and state-of-the-art frequency conversion control technology. This innovation guarantees precise and adaptable thermal regulation, offering remarkable flexibility and efficiency in temperature management.
Introducing our groundbreaking refrigeration system, the epitome of modern technology, featuring cutting-edge 3D-optimized management and advanced frequency conversion control. Experience precision and adaptability in thermal regulation, ensuring unparalleled flexibility and excellence in temperature management.
Delve into the ingenuity of our variable frequency refrigeration system, where advanced technology meets precision. Our intelligent frequency converter expertly modulates the compression speed, even when operating on a steady 50HZ power supply frequency. This system finely tunes the cooling output by continuously analyzing real-time test chamber loads and dynamically aligning compressor frequency with varying chamber temperatures. The result is a significant boost in energy efficiency, delivering outstanding cooling performance.
Revel in the unmatched stability of our test chamber's variable frequency refrigeration system, where precision engineering ensures a consistently regulated temperature environment with minimal fluctuations. This cutting-edge system achieves balanced suction and exhaust pressures, optimizing operational stability and delivering exceptional, reliable performance every time.
Discover a revolutionary blend of energy-efficient refrigeration technology and pioneering energy-saving innovations. Engineered to enhance performance while reducing resource consumption, this system sets new industry benchmarks for sustainability and efficiency, leading the way towards a greener future.
1. Unleash the power of PID and PWM-driven VRF technology, equipped with sophisticated electronic expansion valves for unparalleled thermal flow control. Experience superior low-temperature energy efficiency as these systems meticulously regulate refrigerant flow, ensuring seamless operations without the need for auxiliary heating. This technology is the epitome of precision and efficiency.
Achieve flawless automatic temperature stability through expert three-way flow regulation of refrigeration, cold side, and heating side pipelines. This advanced methodology excels in maintaining peak performance in low-temperature environments, cutting energy consumption by 30%, and significantly boosting overall operational efficiency.
Immerse yourself in our state-of-the-art technology with the integration of the Danish Dan-foss Company's ETS System electronic expansion valve. This groundbreaking innovation allows for dynamic refrigeration capacity adjustments, seamlessly adapting to varying cooling demands and optimizing compressor cooling capacity for remarkable efficiency and performance.
2. Introducing our state-of-the-art dual compressor group design technology, featuring intuitive automatic start-stop functionality. This innovative system intelligently aligns with load conditions to maximize efficiency, exemplifying our cutting-edge series design and our unwavering commitment to performance excellence.
Our refrigeration unit ingeniously combines a binary compound of semi-closed compressors with a fully dense single-stage system. This sophisticated design intelligently adapts to load demands, delivering optimal cooling capacity while extending the lifespan of compressors, ensuring longevity and unwavering reliability.
Innovative Cold Circuit Technology: Embark on a revolutionary exploration of cold circuit technology, where pioneering designs redefine standards and elevate system efficiency to extraordinary levels. This is the future of refrigeration technology, dedicated to excellence and innovation.
Crafted with precision, our power distribution layout meticulously adheres to technical department blueprints and utilizes globally renowned electrical component brands. This guarantees unparalleled reliability and excellence, setting an industry benchmark for quality, performance, and enduring value.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly incorporate illustrious brands like Omron, Sch-neider, and Germany's Phoenix Terminal block into our sophisticated designs. Each line code is labeled with precision for effortless operation, ensuring reliability and a seamless user experience. Our unwavering commitment to excellence drives us to select only the most trusted Chinese brands, guaranteeing unparalleled performance and durability.
Embracing the trusted Pearl River Cable as our brand of choice, we ensure unmatched wire quality and exceptional performance. Our control lines feature a minimum of 0.75 Square RV soft copper wire, renowned for its superior conductivity. Meticulously engineered, key load components such as motor compressors meet strict EC standards. Trap diameters are carefully designed to comply with cable groove wiring safety current standards, while the machine's cable port is expertly sealed to prevent frost-induced short circuits, safeguarding the terminal within the junction box.
Every terminal fixing screw is precisely secured with exact fixed torque, ensuring robust and efficient connections. This meticulous attention to detail significantly reduces risks such as loose fires, enhancing both safety and reliability. Our dedication to precision ensures your peace of mind and sets a new standard for quality.
Refrigeration Series Process: An In-depth and Meticulous Approach
1. Standardization: Pioneering the Path to Unrivaled Excellence
1.1 Our remarkable steel pipe piping process, coupled with stringent welding standards, exemplifies our steadfast commitment to excellence and unparalleled reliability.
By meticulously adhering to perfectly standardized pipe layouts, we ensure consistent stability and unwavering reliability in our systems. This commitment delivers exceptional functionality that stands the test of time, providing not just peace of mind but also enduring excellence.
1.2 Experience perfection in steel pipe bends with our cutting-edge Italian-imported pipe bending machinery. This revolutionary technology reduces the need for welding points and minimizes oxide formation within the tubes during welding. As a result, it dramatically boosts the reliability and durability of the entire system, setting new standards in efficiency and quality.
Placing System Reliability at the Heart of Our Endeavors
Leading the Charge in Shockproof Design through Resilient Pipeline Support
2.1 At Meitec, we adhere to the highest standards in protecting refrigeration copper pipes from shocks and potential damage. By executing thorough evaluations of seismic scenarios, we incorporate arc bends and uniquely designed nylon fixed clamping systems. These innovations prevent deformation and leakage from circular vibrations and temperature changes, thus elevating the reliability and robustness of the refrigeration system to new heights.
Elevating Reliability Throughout the Entire Refrigeration System
2.2 Innovative Oxidation-Free Welding Process
The cleanliness of a refrigeration system's pipeline is pivotal to its efficiency and longevity. Metco enforces a standardized charging welding procedure to minimize excess oxide contamination during welding, ensuring the system consistently operates at its peak potential and longevity.
Through precision and diligent practices, Metco profoundly enhances the efficiency and longevity of the refrigeration system. By reducing oxide pollution during welding, we ensure the system's reliability and performance are maximized, setting a benchmark for excellence.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}