Advanced Electronics Testing Equipment for 3c Vibration Testing Tool
Product Description
Introducing the unrivaled Guangdong Humid Testing Chamber by Guangdong MENTEK Testing Equipment Co., Ltd-a true marvel in the world of environmental simulations. This chamber, a testament to precision and versatility, is meticulously engineered to execute a broad array of high and low-temperature tests across a vast range of electrical components, products, parts, and materials. Whether your testing requirements entail constant, gradient, rapid temperature fluctuations, or assessments of wet heat, MENTEK's chambers are designed not only to meet but to exceed the renowned Chinese national standards T10586-2006 and T10592-2008. This ensures a level of reliability and performance that is unmatched, setting a new benchmark in the industry.
| M-series vibration testing system |
| Technical parameters of 3 tons vibration table body |
| Sinusoidal thrust |
3400kgf |
N×M
Allowable partial load moment |
>500 |
| Random thrust |
3400kgf |
Equivalent mass of moving parts |
34/27kg |
(6ms)
Impact thrust |
6800kgf |
Load connection point |
16 |
| Frequency Range |
DC-2,800Hz |
Countertop screw size (standard) |
M10 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*150mm;8*300mm |
| Impact displacement |
63.5mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
500kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
370mm |
(L×W×H)
Size (no packaging) |
1336mm×860mm×1178mm |
| First order resonant frequency |
2400/2200Hz |
Shaking table weight (no package) |
2470kg |
| Technical parameters of power amplifier |
Technical parameters of fan |
| Maximum output power |
35KVA |
Fan power |
15KW |
| Signal to noise ratio |
>65dB |
Air volume |
1.36m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.075kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
200mm |
| System protection |
Featuring multiple performance protections |
(L×W×H)
Size (no packaging) |
1050mm×897mm×1970mm |
(L×W×H)
Size (no packaging) |
550mm×800mm×1850mm |
Weight (no packaging) |
320kg |
| Amplifier weight (without packaging) |
510kg |
|
|
| System working environment requirements |
|
| |
Purchase configuration |
| temperature |
0-40ºC |
sliding table |
Vertical expansion of the table |
| humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3AC,380V±10%,50Hz,60KAV |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
|
Note:
1. The chamber's external dimensions are meticulously calibrated by the heating and cooling rate, ensuring adaptability to a diverse array of testing scenarios.
2. Features a highly efficient water cooling system, boasting water temperatures ranging from 10~28 ºC and a water pressure of 0.1~0.3Mpa, which guarantee optimal cooling performance and energy efficiency.
3. The chamber offers an optional enhancement feature for dampness and heat, broadening the scope of testing conditions and accommodating a wider range of requirements.
4. An optional dry air blowing system is available for customized needs, providing tailored solutions to specific testing requirements.
5. Includes an impressive optional liquid nitrogen function capable of achieving a remarkable cooling rate of 30 ºC/min, catering to urgent testing demands efficiently.
6. All listed loads are standard; however, the chamber can be custom-designed according to specific customer requirements, ensuring personalized and precise testing solutions.
The equipment meets the following testing standards
Our cutting-edge testing equipment by Guangdong MENTEK rigorously adheres to a comprehensive array of standards: National Standard/T2423.1-2008 Test A for Low Temperature, National Standard/T4243.2-2008 Test B for Partial High Temperature, National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat, and Chinese National Standard/T2423.4-2008 for Change and Damp Heat. Remarkably, it also complies with China National Standard/T2423.34-2012 Test Z/AnnoDominique, supporting a vast spectrum of temperature and humidity scenarios. This ensures consistency and excellence in testing outcomes, providing exceptional performance capabilities.
Structure of the testing chamber
The formidable structure of the testing chamber showcases an outer shell crafted from premium galvanized color steel plate. This offers exceptional durability and protection against environmental impacts, ensuring longevity and robust performance.
Internally, the chambers are lined with SUS304 stainless steel plates, featuring adaptable hanging hole strips for flexible configurations. Each chamber is equipped with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The connection of the inner and outer box doors using high-quality electric wood chicken glass fiber board frames provides superior low-temperature insulation. With a dual-channel design, the silicone foam door sealing strip exhibits outstanding temperature resistance, guaranteeing efficiency and performance throughout the testing process.
Experimental space air circulation:
Harness the sophistication of our advanced air supply system, transforming your testing experience. The chamber is equipped with high and low-temperature resistant, multi-blade aluminum wind turbines, expertly driven by motors. These turbines create a harmonious and consistent airflow, circulating through upper louvers and returning from the bottom. The result? Impeccably uniform temperatures with a precision of less than 2 ºC, spanning an extraordinary range of -70~100 ºC. Evaluated at a global standard of 10 points, this system guarantees consistent, reliable test outcomes that meet international standards.
Controller Operating System
Engineered to perfection, the system incorporates a cutting-edge, low-power (8W) temperature and humidity control device. This ensures remarkable precision and maintains a temperature control accuracy of ±3 ºC. It empowers users with exceptional control and stability, transforming operations into a seamless and efficient experience.
1. High Resolution Screen:
Immerse yourself in an extraordinary visual experience with our 7-inch TET true-color LCD resistive touch screen. Boasting an impressive resolution of up to 800 * 480, it delivers crystal-clear visibility and elevates user experience to unprecedented levels, making interaction intuitive and engaging.
2. High Program Capacity:
Crafted for excellence with vast memory capabilities, this system effortlessly accommodates 1000 programs, each with 1000 segments, and supports 999 total and partial loops. It offers 10 program links and real-time temperature curve displays, significantly enhancing operational efficiency and data management, turning queries and analysis into a seamless experience.
3. High Data Storage Capacity:
Harness the power of advanced data management with our system's capacity to store a wealth of historical data spanning up to an impressive 300 days! Choose the convenience of uploading via hard disk or network cable to your computer, or load directly into the controller for uninterrupted access. Seamlessly integrate with our cutting-edge systems to maintain control effortlessly.
4. Seamless Connectivity:
Experience unparalleled control with our advanced controller, featuring LAN-standard Ethernet communication that streamlines workflows. Effortlessly manage up to 16 devices from a single software platform. Our outflow interface ensures seamless local network integration, empowering remote program management, real-time monitoring, and easy access to historical data.
Heating and Moisture Control System
Elevate your heating efficiency with our innovative bare wire nickel-chromium alloy electric heating tubes. Expertly designed for low thermal inertia, they ensure impeccable temperature control. Combined with state-of-the-art power controls, this system delivers peak heating performance, meticulously tailored to meet your testing requirements.
1. Advanced Humidification System:
Revolutionize your testing environment with our cutting-edge humidification technology. Our sophisticated humidification cylinder, employing a reliable boiler method, guarantees unmatched moisture uniformity. For rapid and precise control, our water plate surface humidification provides exceptional speed and accuracy, effortlessly eliminating impurities like scale. Particularly effective in low humidity dyeing applications, it ensures easy maintenance. Constructed from seamless stainless steel, our humidification tube offers insulation resistance exceeding 50M Ω, and a robust anti-dry burning controller enhances safety.
2. Water Efficiency and Energy Conservation Maximized:
Unlock the full potential of our innovative front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for seamless water and power management. Easy to disassemble and clean for precise upkeep. Achieve meticulous dehumidification control across three distinct humidity zones, adhering to stringent national standards for high temperature and humidity conditions at 85 º C and 85% RH. Our advanced sealed design, which disables point cooling and dehumidification systems, substantially reduces water usage, supporting sustainable operations.
Invest in equipment meticulously designed to endure the most challenging testing environments, providing unmatched reliability and delivering outstanding performance.
1. Choose the Circulating Air Mode: Opt for Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution offers precision and adaptability, ensuring optimal performance at all times.
2. Optimal Water Supply System: RO Reverse Osmosis
When it comes to precise humidification, our state-of-the-art equipment guarantees a continuous flow of pure water through an automated production process, offering unmatched convenience and efficiency tailored to your unique needs.
3. Advanced Polymer Film/Rotor Dehumidification System: A marvel of modern engineering designed to deliver superior dehumidification performance.
For challenging long-term testing in environments with low temperatures and humidity, our advanced cellular chemical dehumidification system is your ultimate solution. It expertly manages a wide humidity range down to 10 º C/10% RH or even lower, exceeding the most stringent standards.
4. LN.Two/ .LCO.2: A dual-component system meticulously engineered for unparalleled precision.
Immerse yourself in our collection of premium professional products, each crafted to perfection, with an extensive range of specifications. Our offerings are sourced directly from prestigious manufacturers across Europe and the United States, guaranteeing top-notch quality and reliability for our esteemed clientele. LN.Two/ .LCO.2: Discover a coupled system that stands in a league of its own, offering an unparalleled combination of precision and reliability for your testing needs.
Harness the power of our superior solenoid valves and cutting-edge control systems to meet your urgent testing demands with lightning-fast thermal acceleration and precise temperature regulation. Experience the ultimate in testing efficiency and control.
5. State-of-the-Art Ultrasonic Cooling and Humidification System: Engineered for maximum performance, this system is essential for managing substantial heat loads efficiently.
For dynamic testing scenarios involving significant heat loads under high temperature and humidity conditions, our state-of-the-art ultrasonic cooling and humidification system is expertly designed to overcome these challenges. Employ this innovative system as a supplementary component to achieve unparalleled performance.
6. Integrate a Glass Inner Door for Manual Operation Access: This avant-garde design not only minimizes environmental impact but also significantly enhances testing accuracy, providing seamless access for manual operations.
To significantly reduce environmental impact during frequent testing or object movement, our glass inner door (∧ 125Mm * Ea.) facilitates manual operations with ease. This innovative design minimizes disruptions from frequent door openings, ensuring enhanced accuracy and reliability in testing outcomes.
7. Cutting-Edge Real-Time Test Data Collection and Recording: Step into the future of technology with our advanced system, meticulously designed to capture and document test data with unmatched precision and speed. Enjoy precise and reliable data access across every phase of testing.
Our state-of-the-art tape recorder is the epitome of precision and reliability, designed specifically for environments where accuracy is paramount. It excels in recording numerous temperature metrics simultaneously, surpassing stringent industry standards and ensuring superior operational expertise.
8. Advanced Computer Connection Operation Recording Software: Elevate your operational prowess with our sophisticated software, seamlessly merging computer connectivity for comprehensive recording operations. Enhance functionality and optimize machine integration for superior performance.
Tailored exclusively for Mattel's environmental measurement machine suite, our innovative connection software transforms the user experience with its enhanced features. Enjoy seamless multi-machine monitoring, rapid data retrieval, and premium electronic attributes, making usability exceptionally straightforward and intuitive.
Craftsmanship
Innovative Structural Technology: Enter a world where groundbreaking design meets structural brilliance. This technology not only shines in its durability but also redefines modern structural perceptions, setting new standards in innovation.
1. Our Company's Premier Hardware Equipment: Explore an unrivaled selection of German and Taiwanese machinery, including the esteemed AMADA AIRS.-255NT Punching system. Complemented by carbon oxide and argon welders, each model epitomizes precision and innovation. Master Autodesk Inventor 3D applications for sheet metal design, establishing new benchmarks in modern manufacturing.
Delve into our exclusive selection of German and Taiwanese imported machinery, featuring the distinguished AMADA AIRS.-255NT Punching system. Equipped with cutting-edge carbon oxide and argon welding machines, each piece represents precision and innovation. Master the versatile Autodesk Inventor 3D software for sheet metal design, virtual assembly, and disassembly, heralding a new era of manufacturing excellence.
2. The shell, constructed from top-grade galvanized steel, is renowned for its exceptional durability. Enhanced with an advanced electrostatic powder spray baking paint finish, it offers enduring protection and an aesthetically pleasing appearance.
Three.. Crafted with meticulous attention to detail using premium imported SUS #304 stainless steel, the inner box features full argon arc welding to prevent air leakage in extreme temperature and humidity conditions. Its rounded corners ensure efficient condensate drainage, optimizing overall performance.
Revolutionary Refrigeration System Technology: Embrace a new era of refrigeration innovation with our pioneering 3D-optimized management and cutting-edge frequency conversion control technology. This advancement ensures precise and flexible thermal management, delivering exceptional efficiency and adaptability.
Presenting our revolutionary refrigeration system, a pinnacle of modern technology, featuring innovative 3D-optimized management and advanced frequency conversion control. Discover precision and adaptability in thermal regulation, offering unmatched flexibility and excellence in temperature management.
Immerse yourself in the advanced elegance of our state-of-the-art variable frequency refrigeration system. This cutting-edge marvel employs an intelligent frequency converter that artfully modulates compression speed even with a constant 50HZ power supply. It deftly adjusts the cooling output to match real-time test chamber loads, dynamically aligning compressor frequency with ever-changing chamber temperatures. The outcome is a significant boost in energy efficiency, paired with unparalleled cooling performance.
Relish the extraordinary stability offered by our test chamber's variable frequency refrigeration system. This sophisticated mechanism creates a meticulously controlled temperature environment characterized by minimal fluctuations. Such precision ensures balanced suction and exhaust pressures, optimizing operational consistency and guaranteeing outstanding, reliable performance that you can trust.
Uncover the ideal fusion of energy-efficient refrigeration technology with pioneering energy-saving advancements. Crafted to elevate performance while reducing resource consumption, this innovative system sets new standards in sustainability and operational efficiency, marking a new era of eco-friendly excellence.
1. Harness the incredible capabilities of PID and PWM-driven VRF technology, featuring advanced electronic expansion valves for superior thermal flow management. Achieve exceptional low-temperature energy efficiency as these systems precisely govern refrigerant flow, ensuring seamless operations without the need for auxiliary heating, thereby optimizing performance.
Achieve flawless automatic temperature stability through expert three-way flow regulation of refrigeration, cold side, and heating side pipelines. This sophisticated approach excels at maintaining peak performance in low-temperature environments, reducing energy consumption by 30%, and significantly boosting overall operational efficiency.
Immerse yourself in our pioneering technology through the integration of the Danish Dan-foss Company's ETS System electronic expansion valve. This groundbreaking innovation permits dynamic refrigeration capacity adjustments, effortlessly adapting to varying cooling demands and optimizing compressor cooling capacity for superior efficiency and enhanced performance.
2. Introducing our groundbreaking dual compressor group design technology, featuring automatic start-stop functionality. This intelligent system intuitively adjusts to load conditions to maximize efficiency, showcasing our commitment to cutting-edge series design and excellence in performance.
Our ingenious refrigeration unit combines a binary compound of semi-closed compressors with a fully dense single-stage system. It smartly adapts to load demands, delivering optimal cooling capacity while significantly extending the lifespan of compressors, ensuring enduring reliability and unparalleled longevity.
Innovative Cold Circuit Technology: Embark on a transformative journey into the realm of cold circuit technology-where groundbreaking designs redefine industry standards and elevate system efficiency to unprecedented heights of excellence.
Crafted with meticulous precision, our power distribution layout strictly adheres to the technical department's blueprints, utilizing globally recognized electrical component brands. This commitment ensures unmatched reliability and excellence, setting an unparalleled benchmark in quality and performance within the industry.
At Guangdong MENTEK Testing Equipment Co., Ltd, we are proud to integrate esteemed brands like Omron, Sch-neider, and Germany's Phoenix Terminal block into our sophisticated designs. Each line code is meticulously labeled for effortless operation and reliability, ensuring a seamless user experience. Our unwavering dedication to excellence propels us to select only the most trusted Chinese brands, guaranteeing unparalleled performance and durability.
Embracing the trusted Pearl River Cable as our preferred brand, we deliver superior wire quality and exceptional performance. Our control lines feature a minimum of 0.75 Square RV soft copper wire, renowned for its robust conductivity. Engineered with precision, key load components like motor compressors adhere to stringent EC standards. Trap diameters are thoughtfully designed to meet cable groove wiring safety current standards, while the machine's cable port is expertly sealed to prevent frost-induced short circuits, ensuring protection for the terminal within the junction box.
Every terminal fixing screw is fastidiously secured with precise fixed torque, guaranteeing connections that are both strong and efficient. This meticulous attention to detail significantly mitigates risks such as loose fires, enhancing both safety and reliability. Our unwavering dedication to detail ensures your utmost peace of mind.
Refrigeration Series Process: A Thorough and Meticulous Exploration
1. Standardization: Leading the Way to Unmatched Excellence
1.1 Our remarkable steel pipe piping process, combined with rigorous welding standards, exemplifies our unwavering commitment to excellence and unparalleled reliability.
By meticulously adhering to flawlessly standardized pipe layouts, we ensure consistent stability and unwavering reliability in our systems, providing not only peace of mind but also exceptional functionality that withstands the test of time.
1.2 Experience the unparalleled precision of state-of-the-art Italian-imported pipe bending machinery that allows us to achieve flawless steel pipe bends. This cutting-edge technology dramatically reduces the need for welding points and minimizes oxide formation inside tubes during welding, thereby significantly boosting the overall reliability and durability of the entire system.
Prioritizing System Reliability: The Unwavering Core of Our Commitment
Pioneering Cutting-Edge Shockproof Design with Sturdy Pipeline Support
2.1 At Meitec, we adhere to the highest standards in supporting and safeguarding refrigeration copper pipes against shocks. Through comprehensive evaluations of potential seismic scenarios, we incorporate arc bends and specially crafted nylon fixed clamping mechanisms to avert deformation and leakage caused by circular vibrations and temperature changes, thereby notably amplifying the overall reliability and robustness of the refrigeration system.
Enhancing Reliability for the Entirety of the Refrigeration System
2.2 State-of-the-Art, Oxidation-Free Welding Process for Unmatched Excellence
It is universally recognized that the cleanliness of a refrigeration system's pipeline is pivotal to its peak efficiency and extended lifespan. Metco employs a meticulously standardized charging welding procedure to effectively mitigate excessive oxide contamination during welding, ensuring the system functions at its highest performance level.
With meticulous practices, Metco significantly boosts the efficiency and extends the operational lifespan of the refrigeration system by minimizing oxide pollution during welding, thereby maximizing the system's reliability and performance to extraordinary extents.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}