Quick Climate Testing Chamber Accurate Environmental Control Analysis Rapid Temperature Humidity Change
Product Description
Product features:
1. The humidity control function can be selected. The temperature rise and fall rate is adjustable. Maximum rate can reach 20ºC/min, auxiliary liquid nitrogen refrigeration can reach 30ºC/min;
2. Equipped with a frequency converter, the wind speed can be adjusted. It can be set to reduce in a constant state. Wind speed; Optional dry air blowing system. Prevent condensation in the box and samples frost;
3. Cold output energy-saving design, recognized by third-party testing institutions. In the major refrigeration department. Unified middle school. The energy-saving effect is very significant.
Main Parameters
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC) - 70+150ºC(-55+80ºC) |
| Temperature fluctuation |
±0.3ºC±0.5ºC |
| Temperature deviation |
± |
| Humidity deviation |
±3%RH(<75%RH)±5%RH (≤75%RH) |
| Heating and cooling rate |
5/10/15/20ºC/min |
| Standard load (aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window (mm) |
300*400/400*600 |
| Test hole (mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size (cm) |
Width |
70 |
80 |
100 |
130 |
| Height |
80 |
90 |
100 |
115 |
| Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V 50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are determined according to the heating and cooling rate
2. Water cooling type (water temperature 10~28ºC, water pressure 0.1~0.3Mpa to ensure cooling performance)
3. Can increase the function of dampness and heat
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30ºC/min)
6. The above loads are standard loads and can be designed according to customer requirements.
Structural Technology
1. The Company's Hardware Equipment:
Introducing our advanced array of premium imported machinery from Germany and Taiwan, featuring the state-of-the-art AMADA AIRS.-255NT Punching system. Each model, ranging from carbon oxide to argon welding machines, exemplifies precision and groundbreaking innovation. Dive into the world of sophisticated Autodrsk Inventor 3D drawing software applications, expertly utilized for sheet metal design, disassembly, and virtual assembly, setting a new standard in modern manufacturing excellence.
2. Crafted from top-tier galvanized steel, the shell boasts superior durability, further enhanced by an advanced electrostatic powder spray baking paint finish that guarantees long-lasting protection and an aesthetically pleasing appearance.
Three.. Skillfully engineered with high-grade imported SUS #304 stainless steel, the inner box undergoes a thorough full argon arc welding process to significantly reduce high-temperature and high-humidity air leakage. Its rounded corners are designed for efficient condensate drainage, significantly optimizing performance.
Revolutionary Refrigeration System Technology
Revolutionizing refrigeration management with cutting-edge 3D-optimized frequency conversion control technology, delivering precise and adaptable thermal regulation, redefining the standards of efficiency and performance.
Our innovative variable frequency refrigeration system operates with a constant power supply frequency of 50HZ, while the intelligent frequency converter adjusts compression speed. This adapts cooling output to real-time test chamber demands, allowing compressor frequency to dynamically align with chamber temperature fluctuations. This ensures exceptional energy efficiency and rapid cooling capabilities for superior performance.
Our test chamber's pioneering variable frequency refrigeration system consistently maintains a stable temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, optimizing operational continuity and reliability.
Bringing you an energy-efficient refrigeration system enhanced by leading-edge energy-saving innovations that underscore our commitment to sustainable technology.
1. Harness PID and PWM-driven VRF technology with electronic expansion valves for superior thermal flow control and low-temperature energy efficiency. Utilizing PID + PWM systems enhances refrigerant flow regulation, efficiently ensuring effective operation without the need for auxiliary heating.
Through precise three-way flow adjustments of the refrigeration, cold, and heating side pipelines, our system achieves automatic temperature constancy. This exceptional method excels in low-temperature conditions, reducing energy consumption by 30% and optimizing performance to perfection.
Our groundbreaking technology, based on the Danish Dan-foss Company's ETS System electronic expansion valve, dynamically adjusts refrigeration capacity to cater to diverse cooling rates, optimizing compressor cooling efficiency.
2. By incorporating cutting-edge dual compressor group design technology, our system automatically adjusts start-stop operations in alignment with load conditions, optimizing efficiency through our sophisticated series design.
The refrigeration unit configuration features a sophisticated binary compound of semi-closed compressors with a fully dense single-stage system, intelligently adjusting based on load requirements, optimizing cooling capacity and prolonging compressor life.
Innovative Cold Circuit Technology
Our power distribution layout is meticulously crafted according to technical department blueprints, utilizing globally recognized electrical component brands to ensure peak reliability and functionality.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate time-honored brands such as Omron, Sch-neider, and GermanyPhoenixTerminal block into our designs. Every line code is distinctly marked to facilitate ease of use and dependability. We select only the most respected brands in China to ensure unparalleled performance and enduring durability.
With the prestigious Pearl River Cable as our trusted brand, we assure unparalleled wire quality and performance. Our control lines boast a minimum selection of 0.75 Square RV soft copper wire, ensuring exceptional conductivity. Key load components like motor compressors are crafted to meet EC standards, with carefully chosen trap diameters to comply with cable groove wiring safety current standards. The machine's cable port is expertly sealed to avert frost-induced short circuits, thereby protecting the terminal in the junction box.
Every terminal fixing screw is meticulously connected with standard fixed torque, ensuring a swift, dependable connection while eliminating potential hazards such as loose fires. This meticulous attention to detail significantly amplifies safety and reliability.
Refrigeration Series Process: A Holistic Approach for Maximum Efficiency
1. Standardization: The Foundation of Unmatched Excellence
1.1 Our premium-quality steel pipe piping process, coupled with stringent welding standards, underscores our unwavering commitment to excellence and reliability.
By strictly adhering to standard pipe layouts, we assure the enduring stability and reliability of our model systems.
1.2 Employing cutting-edge Italian imported pipe bending machinery, we achieve seamless bending of steel pipes. This innovative process dramatically reduces welding points and minimizes oxide generation within the tubes during welding, thereby bolstering overall system reliability.
Prioritizing System Reliability is Our Core Mission
Shockproof Design and Durable Pipeline Support for Enhanced System Longevity
2.1 At MENTEK, we enforce rigorous standards for the support and shock resistance of refrigeration copper pipes. By thoroughly considering seismic protection scenarios, we integrate arc bends and specialized nylon fixed clamping to prevent deformation and leakage resulting from circular vibration and temperature fluctuations, thus reinforcing the entire refrigeration system's reliability.
Strengthening the Entire Refrigeration System's Reliability for Optimal Performance
2.2 Advanced Oxidation-Free Welding Process for Superior System Integrity
It is widely recognized that the cleanliness inside the refrigeration system's pipeline directly impacts its efficiency and longevity. MENTEK employs a standardized charging welding procedure to prevent excessive oxide contamination during welding, thereby ensuring peak performance.
Through meticulous practices, MENTEK significantly enhances the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide pollution during welding, thereby maximizing reliability.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}