High Performance Climate Testing Chamber for Temperature Humidity Damp Heat Test Assessment
Product Description
Embark on a journey of unmatched technological advancement with the Advanced Temperature Damp Heat Testing Chamber, a masterpiece by Guangdong MENTEK Testing Equipment Co.,Ltd. This state-of-the-art instrument is designed with precision to seamlessly perform a wide range of temperature assessments on various electrical products, parts, and materials. Witness the pinnacle of environmental simulation and reliability assurance with its capabilities for both steady and gradient temperature variations, alongside comprehensive wet heat evaluations. Our humidity and heat test chambers, adhering strictly to Chinese national standards T10586-2006 and T10592-2008, set new benchmarks in precision, quality, and dependability.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant standard test requirements
Safety test of monomer battery:The temperature cycle test is carried out according to the following steps
1.1 Monomer battery is charged as per the 6.1.3 method
1.2 The monomer battery is strategically positioned within the temperature chamber, meticulously calibrated based on Table 1 and Figure 2. This process is repeated for 5 cycles, with detailed observations conducted over a 1-hour period.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 Temperature cycle test: The exact temperature and time specifications for each individual cycle
Battery module safety test:The temperature cycle test is carried out according to the following steps
1.1.1 The battery module is charged in accordance with the 6.1.4 method
1.1.2 The temperature of the battery module is precisely positioned in the temperature chamber, which is meticulously adjusted for 5 cycles as detailed in Table 1 and Figure 2.Continuous observation is meticulously conducted for a 1-hour duration.
The equipment meets the following industry-leading testing standards
Our equipment proudly complies with these distinguished national standards: National Standard/T2423.1-2008 Test A for Low Temperature, National Standard/T4243.2-2008 Test B for High Temperature (Partial), National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat, Chinese National Standard/T2423.4-2008 Test Decibel for Change and Damp Heat, and China National Standard/T2423.34-2012 Test Z/AnnoDominique. These standards guarantee a comprehensive range of temperature and humidity combinations or other assessments, showcasing the equipment's phenomenal performance spectrum.
Intricately designed structure of the testing chamber
Crafted with remarkable precision, the outer shell of the test chamber is constructed from robust galvanized color steel plate, offering unparalleled durability.
The inner boxes are a testament to superior craftsmanship, constructed with SUS304 stainless steel plates ingeniously equipped with adjustable hanging hole strips for exact test track placement. Encased in a minimum of 10 cm of rigid polyurethane foam and glass wool, these insulation layers ensure optimal performance. The front doors, an engineering marvel, boast high-quality electric wood chicken glass fiber board frames providing exceptional low-temperature insulation. This is further bolstered by silicone foam sealing strips, adept at withstanding an extensive temperature range.
Efficient experimental space air circulation:
Our expertly designed air supply system features multi-blade aluminum wind turbines, resilient to extreme temperatures. Powered by robust motors, air is skillfully channeled to the upper louvers and returns from the bottom, maintaining a deviation of less than 2 ºC across the -70~100 ºC range, setting an international benchmark at 10 points.
Advanced controller operating system
The system is equipped with a cutting-edge, low-power (8W) temperature and humidity control device, ensuring exceptional precision in temperature regulation with an accuracy reaching an impressive ± 3 ºC.
1. High-resolution display screen:
Introducing an exquisite 7-inch TET true color LCD resistive touch screen. This state-of-the-art display offers a breathtaking resolution reaching up to 800 * 480, bringing you vibrant visuals and a user-friendly interface that elevates your interaction with the device.
2. Extensive Program Capacity: Discover unmatched versatility and flexibility in programming.
Equipped with a vast and versatile memory, this pioneering testing chamber features the remarkable ability to manage up to 1000 programs and 1000 segments. It efficiently oversees 999 total loops and an equal number of partial loops. Revel in the ease of 10 sets of program linking functions. Additionally, enjoy the convenience of a real-time temperature curve display, which allows for immediate and straightforward queries.
3. Expansive Data Storage Capacity: Unleash the boundless possibilities of extensive data management with this innovative chamber.
Seamlessly oversee historical data transfer with an impressive 300 days of storage operation. Effortlessly upload your valuable data to a computer via a network cable or directly load it into the advanced controller for optimal management and strategic analysis.
4. Seamless Connectivity: Discover unmatched connectivity solutions crafted for effortless efficiency.
Experience the power of LAN standard Ethernet communication, providing seamless controller connectivity. This robust architecture supports up to 16 devices with a singular software setup, integrating into regional networks effortlessly and enabling remote program control. Key features such as real-time monitoring and historical curve playback significantly enhance the user experience, bringing unparalleled ease and convenience.
Sophisticated Heating and Humidification System: Explore the cutting-edge design of this advanced and high-performance system.
Meticulously engineered for excellence, the system incorporates bare wire nickel chromium alloy electric heating tubes, offering the benefits of low thermal inertia and minimal heating overshoot. With outstanding precision fluctuations achieved through carefully controlled power, this system is designed for peak performance and reliability.
1. Cutting-edge Humidifier: Elevate your experience with our exceptional humidification system, a pinnacle of humidification technology.
Our advanced humidification system, utilizing the boiler method, ensures unparalleled uniformity with a high-tech humidification cylinder. The surface humidification with the water plate method enhances precision control and accelerates the process, ensuring no impurities like scale within the chamber. It offers outstanding performance at low humidity levels, with easy maintenance and cleaning. The high-quality humidification tube, crafted from seamless stainless steel, boasts insulation resistance exceeding 50M Ω and includes a robust anti-dry burning controller for superior safety, providing you with ultimate peace of mind.
2. Maximizing Water Efficiency and Energy Conservation: Reach unprecedented sustainability and resource optimization.
Featuring a spacious 25L front-mounted water tank with a smart quick-connection design, it facilitates fast plug-in of water and electricity for effortless disassembly and maintenance. Providing precise dehumidification across three distinct humidity zones, this system optimizes water usage while adhering to stringent national standards for high-temperature and humidity conditions, such as 85ºC and 85% RH. With the point cooling and dehumidification system disabled, our innovative closed design dramatically reduces water consumption, embodying the essence of sustainability.
Choose equipment that not only meets but exceeds the most demanding testing conditions, offering unparalleled performance and reliability.
1. Optimal Circulating Air Mode Selection: Choose between Courtyard Air Supply or Variable Speed Motor for remarkable efficiency.
If your product demands precise wind speed control, this innovative solution offers strategic adaptability and precision, making it your perfect choice.
2. Optimal Water Supply System: RO Reverse Osmosis - Elevate your system with the pinnacle of water purity and dependability.
Our automatic system seamlessly streamlines the humidification process by providing a pure, consistent water supply through an RO reverse osmosis system. Save valuable time and enjoy convenience with this efficient solution that guarantees purity and performance.
3. Advanced Polymer Film/Rotor Dehumidification System: Discover unparalleled dehumidification solutions crafted to meet your specific needs and enhance your operational capabilities.
If your testing protocols require precision and demand the most rigorous low-temperature and low-humidity environments, look no further than our state-of-the-art cellular chemical dehumidification system. This innovative solution offers unparalleled performance, achieving a humidity range as low as 10ºC/10% RH or even beyond, making it an ideal match for the most exacting standards and specifications with effortless excellence.
4. LN.Two/ .LCO.2 LN.Two/ .LCO.2
Our extensive selection of professional-grade products is sourced directly from Europe's and the United States' finest manufacturers. With an unwavering commitment to quality and reliability, our offerings are expertly crafted to meet your unique requirements, ensuring you can place your trust in the superiority of our exceptional products. LN.Two/ .LCO.2
Our cutting-edge solenoid valves and integrated control systems are engineered with meticulous attention to precision, tailored for your rapid testing requirements. They provide accelerated testing and superior temperature reduction with unmatched precision control. Rely on our solutions to achieve the excellence and efficiency you demand.
5. Ultrasonic Cooling and Humidification System: Transform your testing capabilities under extreme conditions with our advanced system, designed for optimal performance.
For dynamic high heat load testing in challenging temperature and humidity conditions, our ultrasonic cooling and humidification system is expertly crafted to meet the most rigorous requirements. As an auxiliary device, it guarantees optimal performance and reliability, ensuring your testing processes are safeguarded even in the most demanding conditions.
6. Premium Glass Inner Door with Manual Operation Port: Elevate your testing experience with this premium feature, designed for enhanced convenience and safety.
To facilitate seamless operations, especially when test items require frequent relocation, our chamber features a premium glass inner door, complete with a practical manual operation port (∧ 125Mm * Ea.). This innovative design significantly reduces the environmental impact typically associated with repeated chamber access, preserving the integrity and continuity of your testing conditions effortlessly.
7. State-of-the-Art Real-Time Test Data Recorder
In scenarios where meticulous temperature measurement of both the test environment and the object is crucial, our certified recording solutions are indispensable. The specially engineered tape recorder meets all your data acquisition needs with extraordinary precision, empowering you to capture every detail with complete confidence and accuracy.
8. Cutting-Edge Computer Connectivity and Operation Recording Software
Our custom-designed connection software, crafted exclusively for Mattel's environmental measuring machine kitchen, sets a new benchmark for convenience and functionality. It enables simultaneous monitoring of multiple machines, provides seamless access to data from currently active machines, and offers users the most advanced electronic features available.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}