Advanced Battery Testing Impact Device for Precise Performance Measurement
Product Description
Step into the realm of cutting-edge precision testing with our High Performance Temperature Humidity Chamber. This versatile technological marvel is meticulously engineered for high and low-temperature testing across a diverse range of electrical products, components, and materials. Experience unparalleled environmental simulation reliability with our capabilities that include constant gradient, sudden mutation, and wet heat testing. Crafted with pride by MENTEK, these chambers are designed in strict adherence to the Chinese national standards/T10586-2006 and T10592-2008, ensuring unmatched accuracy and reliability for all your testing needs.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: We offer meticulous customization of dimensions to perfectly suit your specific requirements, allowing for tailored precision in every measurement.
Relevant Standard Test Requirements
Our equipment meets a range of esteemed standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014, affirming its excellence and reliability in diverse testing scenarios.
Refer to section 4.5 for the sample. In accordance with the prescribed test method, the acceleration impact test should be conducted once fully charged. This test is performed in three mutually perpendicular directions sequentially. Detailed methodology is available in section 7.4.
After completing the experiment, proceed with one discharge and charging cycle, following the methods specified in section 4.5. The sample must not ig-nite, explode, or leak, ensuring utmost safety and dependability.
Our state-of-the-art equipment is built to comply with the following rigorous testing standards:
National Standard/T2423.1-2008 Test A: Low Temperature; National Standard/T4243.2-2008 Test B: High Temperature (Partial); National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat; Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat; China National Standard/T2423.34-2012 Test Z/AnnoDominique: Temperature and humidity combination or other temperature and humidity tests within the equipment's performance range.
Structure of the Testing Chamber
Our testing chamber's exterior is robustly crafted from galvanized color steel plates, ensuring unmatched durability and longevity.
Inside, the chamber boasts resilient SUS304 stainless steel construction, complete with side-mounted adjustable hanging hole strips and a versatile test track frame. A robust 10 cm thick layer of rigid polyurethane foam and glass wool provides extraordinary thermal insulation. The interface between the inner and outer doors features premium electric wood chicken glass fiber board frames, delivering exceptional low-temperature insulation. The sealing strip, made from a double-channel series of silicone foam, offers unmatched resistance across a wide temperature spectrum.
Advanced Experimental Space Air Circulation:
Our sophisticated air supply system utilizes multi-blade aluminum wind turbines, expertly crafted to endure extreme temperature conditions. Driven by motors, these turbines efficiently channel air to the upper louvers, with return flow from the bottom, achieving an unparalleled uniformity of less than 2 º C across an extensive range of -70~100 º C, a precision benchmark recognized worldwide.
Controller Operating System
Our system integrates an advanced low-power (8W) temperature and humidity control device, achieving temperature control precision of up to ± 3 º C, ensuring consistently reliable performance.
1. High Resolution Screen:
Immerse yourself in crystal-clear visuals on a 7-inch TET true color LCD resistive touch screen, featuring an impressive resolution of 800 * 480.
2. High Program Capacity:
Our system boasts extensive memory capacity, accommodating 1000 programs/1000 segments, 999 total loops, and 999 partial loops. It offers 10 sets of program linking functions, complete with real-time temperature curve displays for instant query access.
3. High Data Storage Capacity:
Effortlessly transfer 300 days' worth of historical data in storage operation mode by uploading directly to a hard disk or network cable, or integrate it into the controller for seamless data management.
4. Easy Connection:
Our state-of-the-art controller boasts LAN standard Ethernet communication, effortlessly linking up to 16 devices using a single, unified software platform. Seamlessly integrate into local networks via the machine's sophisticated outflow interface, granting unparalleled remote program control capabilities. Enjoy real-time monitoring and playback of historical curves with ease, ensuring your operations remain at the forefront of technological advancement.
Heating and Humidification System
Crafted with precision, our heating system features bare wire nickel chromium alloy electric heating tubes, guaranteeing minimal thermal inertia and heating overshoot. This results in exceptionally precise fluctuations and optimal energy efficiency, elevating your operational standards to new heights.
1. Humidifier:
Immerse in unmatched uniformity with our revolutionary humidification system. Utilizing a humidification cylinder through the trusted boiler method, consistency is assured. For those seeking rapidity, the surface humidification (water plate method) offers brisk operation with unparalleled control precision, banishing impurities like scale within the chamber. Its dyeing capability shines through with exceptional low humidity performance and effortless maintenance. The humidification tube, with its seamless stainless steel shell, boasts an insulation resistance exceeding 50M Ω and includes an advanced anti dry burning controller for supreme safety.
2. Optimizing Water Usage and Energy Efficiency:
Our ingeniously designed front-mounted 25L high-capacity water tank, featuring a quick connection design, streamlines water and electricity access, simplifying disassembly and cleaning. Attain precision dehumidification across three unique humidity zones, dramatically reducing water usage while meeting rigorous national standards for high temperature and humidity scenarios such as 85 º C and 85% RH. The closed design of the point cooling and dehumidification system minimizes water consumption significantly.
Invest in equipment meticulously engineered to conquer even the most formidable testing conditions.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When specific wind speed requirements are essential for your product, our custom-tailored solution stands as the ultimate choice, delivering precision and reliability.
2. Select the Right Water Supply System: RO Reverse Osmosis
For your humidification needs, our cutting-edge equipment utilizes pure water. This automatic water production system continuously provides pure water, saving valuable time and offering supreme convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
If continuous low-temperature and low-humidity testing is crucial to your operations, our innovative cellular chemical dehumidification system is an indispensable ally, achieving humidity levels of up to 10 º C/10% RH or even lower.
4. LN.Two/ .LCO.2
Discover our array of professional products, meticulously imported from Europe and the United States, offering complete specifications to meet your every need. LN.Two/ .LCO.2
Our advanced solenoid valves coupled with integrated control systems are designed to meet your rapid testing requirements. Enjoy swift acceleration and efficient temperature reduction, optimizing your testing process.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic high heat load testing in extreme temperature and humidity environments, our ultrasonic cooling and humidification system is expertly engineered to meet these stringent demands, acting as an essential auxiliary system.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Facilitate frequent movement and operation of your test subjects with ease by incorporating manual operation through our glass inner door (∧ 125Mm * Ea.). This feature effectively mitigates the environmental impact of opening the chamber door, maintaining optimal conditions.
7. Real-Time Data Acquisition Recorder
For comprehensive recording of multiple temperature measurements from both the testing environment and the test object, our recorders adhere to stringent industry standards. A tape recorder becomes your exclusive choice for fulfilling these specific needs.
8. Advanced Computer Connection Operation Recording Software
02fd53ce
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}