Advanced Electronics Vibration Tester 6-ton for 3c Equipment Testing Tool Test Device
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber by Guangdong MENTEK Testing Equipment Co., Ltd, a true marvel in the realm of environmental simulations, crafted with the utmost versatility and precision. This state-of-the-art chamber is meticulously engineered to execute a spectrum of high and low-temperature tests across a vast array of electrical components, diverse products, parts, and materials. Whether your testing requirements involve constant, gradient, rapid fluctuation temperatures, or wet heat assessments, MENTEK's advanced chambers are designed to not only meet but to exceed the esteemed Chinese national standards T10586-2006 and T10592-2008. This ensures a level of reliability and performance that is truly unmatched, setting a benchmark in the industry.
| Technical parameters of 6-ton vibration table body |
| Sinusoidal thrust |
6400kgf |
N×M
Allowable partial load moment |
>1100 |
| Random thrust |
6400kgf |
Equivalent mass of moving parts |
64kg |
(6ms)
Impact thrust |
12800kgf |
Load connection point |
17 |
| Frequency Range |
DC-2.700Hz |
Countertop screw size (standard) |
M12 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*200mm;8*400mm |
| Impact displacement |
63.5mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
800kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
480mm |
(L×W×H)
Size (no packaging) |
1605mm×1130mm×1375mm |
| First order resonant frequency |
2250Hz |
Shaking table weight (no package) |
4500kg |
| Technical parameters of power amplifier |
Technical parameters of fan |
| Maximum output power |
60KVA |
Fan power |
30KW |
| Signal to noise ratio |
>65dB |
Air volume |
1.42m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.094kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
200mm |
| System protection |
Featuring multiple performance protections |
(L×W×H)
Size (no packaging) |
990mm×1455mm×2468mm |
(L×W×H)
Size (no packaging) |
550mm×800mm×2070mm |
Weight (no packaging) |
510kg |
| Amplifier weight (without packaging) |
780kg |
|
|
| System working environment requirements |
Purchase configuration |
| temperature |
0-40ºC |
sliding table |
Vertical expansion of the table |
| humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3AC,380V±10%,50Hz,115KAV |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
|
Note:
1. The chamber's external dimensions are precisely determined by the heating and cooling rate, ensuring adaptability to varied testing scenarios, granting a customized and efficient testing experience.
2. Features a highly efficient water cooling type system, with water temperature ranging from 10~28 ºC and a water pressure of 0.1~0.3Mpa, ensuring optimal cooling performance and energy efficiency, making it perfect for a broad spectrum of testing requirements.
3. The chamber can be enhanced with the function of dampness and heat for added versatility, accommodating a wider range of testing conditions and expanding its utility in various industrial applications.
4. An optional dry air blowing system is available for customized needs, offering tailored solutions to specific testing requirements, thus enhancing the chamber's flexibility and applicability.
5. Includes an optional liquid nitrogen function capable of achieving an impressive 30 ºC/min for rapid cooling, catering to urgent testing demands with unparalleled speed and efficiency.
6. All listed loads are standard, but the chamber can be custom-designed according to specific customer requirements, ensuring personalized and precise testing solutions that meet unique industrial needs.
The equipment meets the following testing standards
Our avant-garde testing equipment by Guangdong MENTEK rigorously adheres to a comprehensive array of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. It is noteworthy that it also complies with China National Standard/T2423.34-2012 Test Z/AnnoDominique, thereby supporting a broad spectrum of temperature and humidity scenarios within its extraordinary performance capabilities, assuring consistency and excellence in testing outcomes.
Structure of the testing chamber
The testing chamber's formidable structure showcases an outer shell crafted from premium galvanized color steel plate, offering exceptional durability and protection against environmental impacts, ensuring longevity and robust performance.
Internally, the chambers are lined with SUS304 stainless steel plates featuring adaptable hanging hole strips for flexible configurations. Each chamber is equipped with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are seamlessly connected using high-quality electric wood chicken glass fiber board frames, delivering superior low-temperature insulation. The silicone foam door sealing strip, ingeniously designed with dual channels, exhibits outstanding temperature resistance, ensuring efficiency and performance throughout the testing process.
Experimental space air circulation:
Harness the power of a sophisticated air supply system that transforms your testing experience. Our chamber features high and low-temperature resistant, multi-blade aluminum wind turbines, expertly driven by motors. These turbines create a harmonious airflow, circulating through upper louvers and returning from the bottom. The results? Impeccably uniform temperatures, with a precision of less than 2 ºC, spanning an extraordinary range of -70~100 ºC. Evaluated at a global standard of 10 points, this system guarantees consistent and reliable test outcomes that meet international excellence.
Controller Operating System
Engineered to perfection, the system incorporates an avant-garde, low-power (8W) temperature and humidity control device. This ensures astounding precision, maintaining a temperature control accuracy of ±3 ºC. Empowering users with unrivaled control and stability, it transforms operations into a seamless experience.
1. High Resolution Screen:
Immerse yourself in an extraordinary visual journey with our 7-inch TET true-color LCD resistive touch screen. Boasting a spectacular resolution of up to 800 * 480, it delivers stunningly clear visibility that facilitates effortless usability and elevates the user experience to unprecedented levels.
2. Exceptional Program Capacity:
Engineered with expansive memory capabilities, this sophisticated system seamlessly accommodates an impressive 1000 programs comprising 1000 segments. It supports 999 total and partial loops, offers 10 program links, and provides real-time temperature curve displays, significantly enhancing operational efficiency and data management. This makes queries and analysis an effortless endeavor, empowering your operations with precision and ease.
3. Unmatched Data Storage Capability:
Harness the power of seamless data management with the extraordinary ability to transfer and manage a wealth of historical data spanning up to 300 days! Opt for the convenience of uploading via hard disk or network cable to your computer, or directly load into the controller for uninterrupted accessibility. This ensures seamless integration with our cutting-edge systems, keeping you in complete control at all times.
4. Effortless Connectivity:
Experience unparalleled control with our advanced controller, featuring LAN-standard Ethernet communication for a streamlined workflow. Effortlessly manage an impressive 16 devices from a singular software platform. Our outflow interface ensures smooth local network integration, granting you the power of remote program management, real-time monitoring, and effortless access to historical data, empowering your operations with ease and efficiency.
Heating and Moisture Control System
Elevate your heating efficiency with our groundbreaking bare wire nickel-chromium alloy electric heating tubes. Meticulously designed for low thermal inertia, they ensure impeccable temperature control. Complemented by state-of-the-art power controls, this system provides optimal heating performance, tailored to meet your precise testing requirements.
1. Cutting-Edge Humidification System:
Revolutionize your testing with our cutting-edge humidification technology. Our sophisticated humidification cylinder, employing a reliable boiler method, ensures unrivaled moisture uniformity. For rapid, accurate control, our water plate surface humidification offers unmatched speed and precision, effortlessly eliminating impurities such as scale. Especially effective in low humidity dyeing applications, it provides effortless maintenance. Crafted from seamless stainless steel, our humidification tube boasts insulation resistance exceeding 50M Ω, with a robust anti-dry burning controller enhancing safety.
2. Maximized Water Efficiency and Energy Conservation:
Unlock the full potential of our innovative front-mounted 25L capacity water tank, ingeniously crafted with a quick-connect system for seamless water and power management. Effortlessly disassemble and clean to maintain precision. Achieve meticulous dehumidification control across three distinct humidity zones, adhering to stringent national standards for high temperature and humidity conditions at 85 º C and 85% RH. Our advanced sealed design, which disables point cooling and dehumidification systems, dramatically reduces water usage, endorsing sustainable operations.
Invest in equipment meticulously engineered to withstand the most demanding testing environments, offering unmatched reliability and delivering exceptional performance.
1. Select the Circulating Air Mode: Opt for Courtyard Air Supply or Variable Speed Motor
For products necessitating specific wind conditions, this customizable solution offers precision and adaptability, guaranteeing peak performance.
2. Optimum Water Supply System: RO Reverse Osmosis
When it comes to precise humidification, our state-of-the-art equipment ensures an uninterrupted flow of pure water through an automated production process, offering unparalleled convenience and efficiency tailored to meet your specific needs.
3. State-of-the-Art Polymer Film/Rotor Dehumidification System: Witness the marvel of modern engineering with our cutting-edge system, crafted to deliver exceptional dehumidification performance. This innovation stands as a testament to precision and efficiency, ensuring optimal results every time.
For the most demanding long-term testing scenarios in environments characterized by low temperatures and humidity, our advanced cellular chemical dehumidification system is the ultimate solution. It expertly manages a wide humidity range down to an impressive 10 º C/10% RH, or even lower, exceeding the most stringent industry standards with unmatched efficiency and effectiveness.
4. LN.Two/ .LCO.2: A dual-component system meticulously engineered for unparalleled precision and excellence, setting new standards in the industry.
Step into a world of premium professional products where excellence meets the highest standards. These items are meticulously crafted, offering a broad selection of specifications sourced from the most esteemed manufacturers in Europe and the United States. By choosing our products, you are assured of top-notch quality that epitomizes excellence, unwavering reliability, and sophisticated craftsmanship. LN.Two/ .LCO.2: This coupled system represents a remarkable engineering achievement, epitomizing precision and reliability. It defines a new benchmark for performance excellence, establishing a standard for technological advancement that is difficult to surpass.
Unlock the potential of our superior solenoid valves and state-of-the-art control systems to effortlessly meet your urgent testing demands. With rapid thermal acceleration and precise temperature regulation, these systems ensure exceptional precision and effectiveness, elevating your testing processes to new heights of excellence.
5. Sophisticated Ultrasonic Cooling and Humidification System: Engineered for peak performance, this advanced system efficiently manages substantial heat loads, ensuring continuous operational excellence and reliability.
For intricate scenarios involving dynamic testing of large heat loads under high temperature and humidity, our pioneering ultrasonic cooling and humidification system is expertly designed to meet these challenges. Use it as a supplementary component to achieve unmatched performance and reliability, even in the most demanding conditions.
6. Include a Glass Inner Door for Manual Operation Access: This innovative, eco-friendly design significantly reduces environmental impact while enhancing the accuracy and reliability of your testing procedures. A true blend of functionality and sustainability.
To greatly reduce environmental impact during frequent testing or object handling, our advanced design incorporates a glass inner door (∧ 125Mm * Ea.) for manual operations. This cutting-edge feature minimizes disturbances from frequent door openings, enhancing testing fidelity and precision.
7. State-of-the-Art Real-Time Test Data Collection and Recording: Experience the zenith of modern technology with our advanced system, designed to capture and record test data with unmatched precision and speed. This feature ensures reliable and accurate data at every stage of your testing journey, empowering you with actionable insights.
Our state-of-the-art tape recorder is the epitome of precision and reliability. Designed for environments where accuracy is paramount, it excels at simultaneously recording numerous temperature metrics, surpassing rigorous industry standards with unmatched operational proficiency and precision.
8. Advanced Computer Connection Operation Recording Software: Enhance your operational capabilities with our sophisticated software, seamlessly integrating computer connectivity for comprehensive recording operations. It optimizes machine integration and elevates your processes to new heights of efficiency and performance.
Exclusively tailored for Mattel's environmental measurement machine suite, our revolutionary connection software elevates the user experience. Enjoy enhanced features with seamless multi-machine monitoring, rapid data retrieval from operational units, and premium electronic attributes, ensuring usability is intuitive and efficient.
Innovative Structural Technology: Enter a realm where innovation converges with structural excellence, offering groundbreaking design that redefines modern perceptions. This technology is celebrated for its durability and transformative impact on the landscape of structural design.
1. Our Company's Premier Hardware Equipment: Discover an extraordinary array of machinery from Germany and Taiwan, featuring the acclaimed AMADA AIRS.-255NT Punching system. Equipped with innovative carbon oxide and argon welders, each model is a testament to precision and innovation. Master the Autodesk Inventor 3D applications for sheet metal design, setting new benchmarks in manufacturing excellence.
Discover our premium selection of imported cutting-edge machinery from Germany and Taiwan, featuring the prestigious AMADA AIRS.-255NT Punching system. Equipped with state-of-the-art carbon oxide and argon welders, each piece embodies precision and innovation. Dive into the comprehensive capabilities of Autodesk Inventor 3D software, revolutionizing sheet metal design, virtual assembly, and disassembly, igniting a new era of manufacturing brilliance.
2. The shell, expertly crafted from premium galvanized steel, is renowned for its exceptional durability. Boasting a sophisticated electrostatic powder spray baking paint finish, it offers enduring protection and a visually appealing appearance, merging functionality with aesthetics.
Three.. Our inner box is meticulously constructed from high-quality imported SUS #304 stainless steel, featuring complete argon arc welding that effectively prevents air leakage in high-temperature and humidity environments. Its rounded corners facilitate efficient condensate drainage, enhancing overall performance and reliability.
Revolutionary Refrigeration System Technology: Embrace the future of refrigeration with our groundbreaking 3D-optimized management system and advanced frequency conversion control technology. This remarkable innovation ensures precision and adaptability in thermal regulation, offering remarkable flexibility and efficiency in temperature management, setting an unparalleled standard in refrigeration excellence.
Introducing our pioneering refrigeration system, the zenith of modern technology. It is equipped with cutting-edge 3D-optimized management and state-of-the-art frequency conversion control. Experience ultimate precision and adaptability in thermal regulation, delivering unmatched flexibility and extraordinary excellence in temperature management.
Explore the brilliance of our variable frequency refrigeration system, where advanced technology converges with precision engineering. Our intelligent frequency converter expertly modulates the compression speed even with a steady 50HZ power supply frequency. This system harmonizes the cooling output by continuously analyzing real-time test chamber loads and dynamically adjusting compressor frequency according to varying chamber temperatures. The result is a significant boost in energy efficiency, providing truly outstanding cooling performance.
Experience the unparalleled stability of our test chamber's variable frequency refrigeration system, where precision engineering assures a consistently regulated temperature environment with minimal fluctuations. This state-of-the-art system achieves balanced suction and exhaust pressures, optimizing operational stability and delivering exceptional and reliable performance every time.
Discover an innovative blend of energy-efficient refrigeration technology with pioneering energy-saving advancements. Meticulously engineered to enhance performance while minimizing resource consumption, this system sets new industry standards for sustainability and efficiency, guiding the way to a greener future.
1. Unleash the potential of PID and PWM-driven VRF technology, featuring sophisticated electronic expansion valves for unmatched thermal flow control. Benefit from superior low-temperature energy efficiency as these systems precisely manage refrigerant flow, ensuring seamless operation without auxiliary heating. This technology epitomizes precision and efficiency at its finest.
Achieve impeccable automatic temperature stability through expert three-way flow regulation of refrigeration, cold side, and heating side pipelines. This advanced approach excels in maintaining peak performance in low-temperature environments, reducing energy consumption by 30%, and significantly boosting overall operational efficiency.
Immerse yourself in cutting-edge technology with the integration of the Danish Dan-foss Company's ETS System electronic expansion valve. This groundbreaking innovation enables dynamic refrigeration capacity adjustments, seamlessly adapting to varying cooling demands and optimizing compressor cooling capacity for exceptional efficiency and performance.
2. Introducing our state-of-the-art dual compressor group design technology, including intuitive automatic start-stop functionality. This innovative system intelligently synchronizes with load conditions to maximize efficiency, highlighting our cutting-edge series design and our unwavering commitment to performance excellence.
Our refrigeration unit ingeniously combines a binary compound of semi-closed compressors with a fully dense single-stage system. This sophisticated design adeptly adjusts to load demands, delivering optimal cooling capacity while extending the lifespan of compressors, ensuring enduring reliability and longevity.
Innovative Cold Circuit Technology: Embark on a groundbreaking exploration of cold circuit technology, where pioneering designs redefine standards and elevate system efficiency to extraordinary heights. This is the future of refrigeration technology, driven by a relentless pursuit of excellence and innovation.
With unparalleled attention to detail, our power distribution layout embodies the epitome of excellence by meticulously following the blueprints crafted by our technical department. By integrating components from globally esteemed electrical brands, we ensure unmatched reliability and performance. This dedication to quality and precision sets an industry standard, propelling our products to the forefront of innovation and enduring value.
At Guangdong MENTEK Testing Equipment Co., Ltd, we are proud to incorporate prestigious brands such as Omron, Sch-neider, and Germany's Phoenix Terminal block into our advanced designs. Our commitment to precision is evident as each line code is accurately labeled, ensuring effortless operation and an impeccable user experience. By prioritizing excellence, we exclusively select the most trusted Chinese brands, guaranteeing exceptional performance and enduring durability.
By choosing the renowned Pearl River Cable, we ensure that our wiring boasts unparalleled quality and exceptional performance. Our control lines are crafted with a minimum of 0.75 Square RV soft copper wire, celebrated for its superior conductivity. Every key load component, including motor compressors, is engineered to meet the rigorous EC standards. The trap diameters are thoughtfully designed to align with cable groove wiring safety current standards. Additionally, the machine's cable port is expertly sealed, effectively preventing frost-induced short circuits and safeguarding the terminal within the junction box.
Each terminal fixing screw is secured with precise torque, guaranteeing robust and stable connections. This meticulous attention to detail significantly reduces risks such as loose fires, enhancing safety and reliability. Our unwavering dedication to precision not only ensures peace of mind but also sets a new standard for exceptional quality, thereby enhancing product integrity.
Refrigeration Series Process: A Thorough and Meticulous Exploration
1. Standardization: Leading the Way to Unmatched Excellence
1.1 Our exceptional steel pipe piping process, combined with strict welding standards, reflects our steadfast commitment to achieving unparalleled reliability and excellence.
By rigorously adhering to precisely standardized pipe layouts, we ensure consistent stability and unwavering reliability in our systems. This dedication to excellence results in remarkable functionality that stands the test of time, providing peace of mind and enduring value.
1.2 Experience perfection in steel pipe bends with our cutting-edge Italian-imported pipe bending machinery. This innovative technology minimizes welding points and reduces oxide formation within the tubes during welding. The result is enhanced reliability and durability of the entire system, setting new benchmarks in quality and efficiency.
Placing System Reliability at the Core of Our Initiatives
Leading the Revolution in Shockproof Design with Robust Pipeline Support
2.1 At Meitec, we champion the highest standards in protecting refrigeration copper pipes from shocks and potential damage. Through rigorous seismic scenario evaluations, we integrate arc bends and uniquely designed nylon fixed clamping systems. These advancements prevent deformation and leakage from circular vibrations and temperature changes, elevating the system's reliability and robustness to unprecedented levels.
Enhancing Reliability Across the Entire Refrigeration System
2.2 Pioneering an Innovative Oxidation-Free Welding Process
The cleanliness of a refrigeration system's pipeline is crucial to its efficiency and longevity. Metco implements a precise charging welding procedure to significantly reduce excess oxide contamination, ensuring the system consistently operates at peak performance and extends its lifespan.
Through precise and meticulous practices, Metco greatly enhances the efficiency and longevity of the refrigeration system. By reducing oxide pollution during welding, we optimize the system's reliability and performance, setting a new benchmark for excellence in the industry.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}