| Customization: | Available |
|---|---|
| After-sales Service: | Support Operation Guidance |
| Power Supply: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Relevant standard test requirements
Meet the standards: IEC.62133-2012, UL.1642, United Nations38.3 and 31241-2014 standards
Low air pressure; put the battery according to 4.5.1. After the specified test method is fully charged. Place the battery in a vacuum chamber at 20ºC±5ºC, and pull it out. Empty general the pressure in the box is reduced to 11.6Kpa. (Simulated altitude 15240m). And keep it for 6h. The battery should not catch fire, do not explode, and do not leak.
Main features:
Adopt high-quality 5mm SUS.304 stainless steel inner pressure-bearing box. Its overall compressive strength. The design ability is greater than 10t/square. And it is resistant to high and low temperatures and not easy to oxidize.
The inner wall of the outer box is strengthened, enhance the force support of the outer box.
The insulation filling material is a vacuum-specific composite pressure-bearing insulation material. Strong pressure-bearing capacity does not break under high pressure.
Main parameters
| Model | MBS-QY125 | MBS-QY216 | MBS-QY512 | MBS-QY1000 |
| Temperature range | Normal temperature | |||
| Display mode | PLC. Touch screen display (7-inch touch screen) | |||
| Unit | Kpa | |||
| Inner box size W*H*D mm | 500*500*500 | 600*600*600 | 800*800*800 | 1000*1000*1000 |
| Outer box size W*H*D mm | 850*1680*1300 | 950*1680*1400 | 1150*1780*1600 | 1350*1780*1800 |
| Inner wall materials | Stainless steel plate SUS304 | |||
| Outer box material | Double-sided galvanized steel plate, surface spraying treatment | |||
| Pressure-bearing type | Internal pressure | |||
| Time keeping time | Four digits display 0~9999 (H hours, M minutes, scan be switched in seconds) | |||
| Observation window | The door of the box is equipped with a window. The window glass is made of multi-layer vacuum glass, with automatic defrosting function, the glass surface film electronic heating can ensure that the glass surface is free of frost and condensation during any test. | |||
| Atmospheric pressure | 5Kpa.-100Kpa. (Adjustable) | |||
| Air pressure fluctuations | ≤5% | |||
| Vacuum degree | The standard requirement is 11.6Kpa, vacuum representation value-89.7Kpa. | |||
| Power supply | AC220V 50Hz./380V 50Hz | |||
| USB interface | Test data can be exported | |||
){kind=link}