Advanced Rapid Climate Simulation Humidity Temperature Test Chamber Control Testing Equipment
Product Description
Enter a world of precision and advanced technology with the Guangdong Humid Testing Chamber, a masterpiece in environmental simulation engineering. This exceptional chamber epitomizes versatility and meticulous precision, conducting both high and low-temperature tests with remarkable accuracy on a myriad of electrical components, varied products, parts, and materials. Its testing capabilities encompass constant, gradient, and rapid temperature fluctuations, as well as wet heat evaluations. The MENTEK chamber doesn't merely comply with Chinese national standards T10586-2006 and T10592-2008-it surpasses them, setting a new benchmark for reliability and outstanding performance in climate simulation technology. It stands as your premier partner for achieving testing excellence.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are expertly designed to meet specific heating and cooling rate needs, ensuring peak efficiency and flexibility.
2. Water-cooled specifications feature a water temperature range of 10~28 ºC and a water pressure range of 0.1~0.3Mpa, providing unmatched cooling performance and reliability.
3. Enhance your testing conditions with an advanced function option that includes an extra dampness and heat feature, optimizing every trial.
4. Experience unparalleled adaptability with an optional dry air blowing system, specifically crafted to meet your precise testing needs.
5. Boost rapid cooling efficiency with an optional liquid nitrogen feature that achieves a cooling rate of 30 ºC/min, ensuring swift, effective results.
6. Standard configurations can be custom-tailored to meet specific client requirements, providing bespoke solutions for every testing need.
The equipment meets the following testing standards
Our cutting-edge testing equipment rigorously adheres to an extensive suite of stringent standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. It also aligns with the China National Standard/T2423.34-2012 Test Z/AnnoDominique. This comprehensive compliance guarantees that our equipment excels across a wide range of temperature and humidity scenarios, offering unmatched reliability and precision within its vast performance capabilities.
Structure of the testing chamber
The robust testing chamber structure is crafted with an outer shell made from premium galvanized color steel plate, providing exceptional durability and protection against environmental elements, ensuring longevity and reliable performance.
Inside, the chambers are constructed from SUS304 stainless steel plates, featuring adaptable hanging hole strips for versatile configurations. Each chamber is thoughtfully designed with a test track frame, insulated with an impressive 10 cm layer of rigid polyurethane foam and glass wool. High-quality electric wood chicken glass fiber board frames securely link the inner and outer box doors, providing exceptional low-temperature insulation. The silicone foam door sealing strip, ingeniously designed with dual channels, offers remarkable temperature resistance, ensuring optimal performance and energy efficiency.
Experimental space air circulation:
Outfitted with a cutting-edge air supply system, the chamber employs high and low-temperature resistant multi-blade aluminum wind turbines driven by motors. These advanced turbines expertly circulate air through upper louvers and return it from the bottom, maintaining temperature uniformity within less than 2 ºC across an impressive range of -70~100 ºC. This system is rigorously evaluated to an international standard of 10 points, ensuring consistency and precision in every test.
Controller operating system
Equipped with a state-of-the-art, low-power (8W) temperature and humidity control device, the system offers extraordinary accuracy, boasting a temperature control precision of ±3 ºC, setting a new standard in control technology and ensuring superior performance.
1. High resolution screen:
Delight in the vibrant and exquisite detail provided by a stunning 7-inch TET true-color LCD resistive touch screen. Boasting an impressive resolution of up to 800 * 480, it ensures superb visibility and clarity for easy navigation and operation, bringing your experience to life with exceptional ease.
2. High Program Capacity: Unleash a profound enhancement in your testing processes with our unmatched program capacity.
Revolutionize your testing capabilities with our extraordinary memory capacity, allowing you to store an astounding 1000 programs, each equipped with 1000 segments. Take advantage of 999 total loops and 999 partial loops, along with 10 program linking options. Experience the instant display of real-time temperature curves, simplifying queries and deepening your analytical insights.
3. High Data Storage Capacity: Enjoy unparalleled access to your data with our expansive storage solutions.
Effortlessly manage and transfer extensive historical data, lasting up to 300 days. Whether you're uploading directly via a hard disk or network cable to your computer, or storing it in the controller for ongoing access, this streamlined process enhances your convenience and maximizes operational efficiency.
4. Seamless Connectivity: Experience superior integration with our cutting-edge connectivity technologies.
Unleash extraordinary control with our state-of-the-art controller, featuring LAN standard Ethernet communication. Effortlessly manage up to 16 devices through a single software platform. With seamless network integration, enabled by the outflow interface, you gain remote program management capabilities, real-time monitoring, and quick access to historical data. Discover the ultimate in convenience for control and data management.
Heating and Moisture Control System: Achieve unparalleled precision and performance in your testing operations.
Discover the future of heating precision with our innovative bare wire nickel-chromium alloy electric heating tubes. Designed to offer low thermal inertia and minimize overshoot, these tubes deliver unmatched accuracy in temperature control. Combined with advanced power management, this system ensures optimal performance for all your testing needs.
1. Advanced Humidification System: Elevate your testing protocols with cutting-edge moisture control technology.
Elevate your testing with our groundbreaking humidification technology. Utilizing a state-of-the-art humidification cylinder with the reliable boiler method, it delivers superior moisture uniformity. For fast and precise control, our water plate surface humidification offers unmatched speed and accuracy, efficiently purifying impurities such as scale. Perfect for dyeing in low humidity conditions, it ensures hassle-free maintenance. Our humidification tube, crafted from seamless stainless steel, boasts insulation resistance over 50M Ω and features a robust anti-dry burning controller for enhanced safety.
2. Water Efficiency and Energy Conservation Maximized: Embrace a sustainable future with advanced efficiency features.
Experience the convenience of our front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system, ensuring efficient management of water and power. Easy disassembly and cleaning allows for precise maintenance. Achieve accurate dehumidification across three specific humidity zones, adhering to rigorous national standards for high temperature and humidity at 85 º C and 85% RH. Our sophisticated sealed design deactivates point cooling and dehumidification systems, significantly reducing water consumption and ushering in a new era of sustainable operations.
Choose our equipment, engineered to excel in the most challenging testing environments, delivering unmatched reliability and exceptional performance.
1. Choose the Circulating Air Mode: Opt for Courtyard Air Supply or Variable Speed Motor for precision control.
For products requiring specific wind conditions, our customizable solution ensures precision and adaptability, guaranteeing optimal performance every time.
2. Optimal Water Supply System: RO Reverse Osmosis delivers unparalleled purity and convenience.
When accuracy in humidification is critical, our equipment ensures a constant supply of pure water through an automated production process, enhancing convenience and time-saving.
3. Advanced Polymer Film/Rotor Dehumidification System: Achieve excellence in extreme conditions.
For demanding long-term testing in low-temperature and low-humidity environments, our advanced cellular chemical dehumidification system is the ultimate solution. It manages a vast humidity range, reaching down to 10 º C/10% RH or lower, conforming to the highest testing standards.
4. Experience unparalleled professionalism with our top-tier products. LN.Two/ .LCO.2: Access an extensive range of specifications directly sourced from leading manufacturers in Europe and the United States.
We offer top-tier professional products with a comprehensive range of specifications, sourced directly from renowned manufacturers in Europe and the United States. LN.Two/ .LCO.2
Employ our advanced solenoid valves and expertly crafted control systems to cater to urgent testing requirements, delivering rapid thermal acceleration alongside precise temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Our revolutionary ultrasonic cooling and humidification system is expertly designed to manage dynamic testing under substantial heat loads paired with elevated temperatures and humidity. Use this innovative system as a supplementary component to achieve unparalleled performance and ensure exceptional test results.
6. Integrate a Glass Inner Door for Manual Operation Access
Minimize environmental impact during frequent testing or object movement with manual operation via a strategically placed glass inner door (∧ 125Mm * Ea.). This innovative design reduces disturbances from recurrent door openings, thus preserving the integrity of your testing processes.
7. Real-Time Test Data Collection and Recording
In precision-demanding environments, our tape recorder emerges as the ultimate leader, engineered for simultaneous multi-temperature data capture. It surpasses the highest specification standards, ensuring that your operations are consistently monitored by industry experts with unparalleled accuracy.
8. Advanced Computer Connection Operation Recording Software
Our cutting-edge connection software is meticulously designed for Mattel's suite of environmental measuring machines, offering users enhanced operational capabilities. Experience seamless oversight across multiple machines, efficient data extraction, and state-of-the-art electronic features that redefine user interaction.
Innovative Structural Technology
1. Our Company's Premier Hardware Equipment:
Explore our elite collection of German and Taiwan-imported machinery, featuring the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding devices, each item exemplifies precision and cutting-edge innovation. Master an array of Autodesk Inventor 3D drawing software for sheet metal design, virtual assembly, and disassembly, setting new benchmarks in modern manufacturing excellence.
2. Crafted from high-quality galvanized steel, the exterior shell boasts exceptional durability, further enhanced by an advanced electrostatic powder spray baking paint finish. This combination offers lasting protection and a sophisticated aesthetic appeal.
Three.. Expertly engineered with imported SUS #304 stainless steel, the internal box utilizes a comprehensive argon arc welding process to prevent air leakage under high-temperature and high-humidity conditions. The rounded corners ensure efficient condensate drainage, optimizing the testing environment's operational performance.
Revolutionary Refrigeration System Technology
Our 3D-optimized refrigeration system management employs state-of-the-art frequency conversion control technology, offering precise and adaptable thermal regulation to ensure unmatched flexibility and exceptional performance.
In our variable frequency refrigeration system, the frequency converter intelligently modulates compression speed, customizing cooling output to real-time test chamber loads. This dynamic adjustment of compressor frequency as chamber temperatures vary enhances energy efficiency, delivering rapid cooling for superior performance.
Experience flawless consistency with our test chamber's variable frequency refrigeration system, maintaining a stable temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, optimizing operational reliability for superior performance.
Harness the power of our energy-efficient refrigeration system technology, integrated with groundbreaking energy-saving innovations. This system is engineered to elevate performance while minimizing resource consumption, leading the way in sustainable technological advancement.
1. Leverage the capabilities of PID and PWM-driven VRF technology, utilizing electronic expansion valves for precise thermal flow control. Achieve low-temperature energy efficiency with PID + PWM systems, enhancing refrigerant flow regulation and ensuring effective operation without auxiliary heating.
With meticulous three-way flow regulation of refrigeration, cold side, and heating side pipelines, achieve automatic temperature stability. This method maintains optimum performance under low-temperature conditions, reducing energy consumption by 30% and significantly boosting overall efficiency.
Discover the unparalleled precision of our system that leverages the cutting-edge Danish Dan-foss Company's ETS System electronic expansion valve. This sophisticated component allows for dynamic adjustments in refrigeration capacity, adapting seamlessly to diverse cooling rates. The result is an optimized compressor cooling capacity that elevates efficiency to new heights, ensuring your operations run smoother and more economically.
2. Our technology proudly boasts a revolutionary dual compressor group design, featuring an automatic start-stop functionality that is finely tuned to align with varying load conditions. This intelligent design maximizes efficiency and is a testament to our commitment to innovation and excellence, driven by our advanced series design that empowers users to achieve unmatched performance.
The refrigeration unit is a marvel of engineering, incorporating a sophisticated binary compound of semi-closed compressors paired with a fully dense single-stage system. This advanced configuration intelligently adapts to load demands, ensuring optimal cooling capacity while significantly extending the lifespan of the compressor-an investment in longevity and sustained performance.
Embrace the future of cooling with our Innovative Cold Circuit Technology, a leap forward in refrigeration solutions.
Our power distribution layout is a masterpiece crafted with precision, adhering strictly to the technical department's blueprints. By incorporating globally esteemed electrical components from revered brands, we ensure unparalleled reliability. Our meticulous selection positions our systems at the pinnacle of electrical excellence, embodying both art and science in engineering.
At Guangdong MENTEK Testing Equipment Co., Ltd, we pride ourselves on integrating components from legendary brands like Omron, Sch-neider, and Germany Phoenix Terminal block into our groundbreaking designs. Each line code is carefully marked for ease of use and unmatched reliability. Only the most esteemed Chinese brands are handpicked, promising outstanding performance and enduring durability.
Choose the Pearl River Cable for a guarantee of exceptional wire quality and superior performance. Our control lines meet the highest standards with a minimum specification of 0.75 Square RV soft copper wire for optimal conductivity. Key load components, such as motor compressors, are engineered to meet stringent EC standards. Our precisely chosen trap diameters adhere to stringent cable groove wiring safety standards, while expertly sealed cable ports prevent frost-induced short circuits, safeguarding the terminal within the junction box from potential harm.
Each terminal fixing screw is secured with a standard fixed torque, ensuring swift and secure connections every time. This meticulous attention to detail significantly enhances the safety and reliability of our systems, effectively mitigating risks such as loose connections and potential fires, providing peace of mind to our users.
Refrigeration Series Process: An All-Encompassing and Thorough Approach.
1. Standardization: Charting the Pathway to Unmatched Excellence.
1.1 Our superior steel pipe piping process, combined with rigorous welding standards, highlights our unwavering commitment to excellence and reliability that is second to none.
Adhering to standard pipe layouts ensures our models boast steadfast stability and dependable reliability at every juncture, guaranteeing optimal performance consistently.
1.2 Utilizing cutting-edge Italian pipe bending machinery, we create seamless steel pipe bends. This innovation drastically reduces welding points and minimizes oxide formation during welding, thereby enhancing overall system reliability and setting new industry benchmarks.
Placing System Reliability at the Forefront of Our Objectives.
Innovative Shockproof Design and Robust Pipeline Support.
2.1 At Meitec, we enforce exacting standards for supporting and shockproofing refrigeration copper pipes. By rigorously evaluating potential seismic scenarios, we integrate arc bends and specialized nylon clamping which protect against deformation and leakage. This approach substantially boosts the overall reliability of our refrigeration system, offering unparalleled peace of mind.
Revolutionizing System Reliability Across the Complete Refrigeration System.
2.2 Introducing Advanced Oxidation-Free Welding Techniques.
Recognizing the critical importance of pipeline cleanliness for the efficiency and longevity of a refrigeration system, Metco implements a standardized charging welding procedure. This strategy deftly avoids excessive oxide contamination, ensuring peak performance and reliability with every use.
Through our meticulous practices, Metco not only enhances the refrigeration system's efficiency but also extends its operational lifespan. By minimizing oxide contamination during welding, we ensure maximum reliability and performance at every stage of operation, redefining industry standards.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}