| Customization: | Available |
|---|---|
| After-sales Service: | Support Operation Guidance |
| Power Supply: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Relevant standard test requirements
1.1 The test object is the battery pack or system
1.2 In the test, the size of the flat plate filled with gasoline is 20cm larger than the horizontal ruler of the test object, and the height of the flat plate is not higher than 8cm on the surface of gasoline. The distance between the gasoline liquid level and the test object is set to 50cm. Or test the ground height of the object on the ground when the vehicle is idle., or at the agreement of both parties, water is injected into the bottom of the flat plate.
1.3 Ig-nite gasoline at least 3m away from the equipment under test. After 60s of preheating, place the oil tray under the equipment under test, if the size of the oil plate is too large to be moved, you can use the way to move the bracket of the sample box under test.
1.4 The test subjects are directly exposed to the flame for 70s.
1.5 Cover the cover plate on the oil pan, and the test subject will test 60s in this state or after negotiation between the two parties. Continue to be directly exposed to the flame for 60s.
1.6 Remove the oil pan and observe for 2 hours.
1.7 Requirements: There is no explosion in the battery pack or system. If there is a flame, it should be extinguished within 2min after the fire source is removed.
Main parameters
| Name of the equipment | Battery pack external fire test device |
| Model | MBS-9000M-TS |
| Test space | D3000*W2000*H1000mm |
| The size of the battery placement platform | 3500*2500mm |
| Equipment size | W4200*H1300*D9000mm |
| The total weight of the equipment | Weigh 3.5Tons |
| Control system | PLC+Touch screen close-up adjustment combined with computer remote control |
| The distance from the combustion platform to the oil surface | The distance between the gasoline liquid level and the test subject is 30~70cm It can be adjusted within the range, and the default value is 50cm, inject water into the bottom of the oil pan |
| Power supply | AC380V 5.5kW |
| Flame adjustment | The burning area of the oil plate can be adjusted according to the requirements. |
){kind=link}