Advanced Battery Pack High Low Temperature Damp Heat Tester for Humidity Analysis
Product Description
Introducing the unparalleled marvel of the Advanced Temperature Damp Heat Testing Chamber by Guangdong MENTEK Testing Equipment Co.,Ltd. This sophisticated instrument is a testament to engineering excellence, designed to precisely navigate both high and low temperature assessments across a broad spectrum of electrical products, components, and materials. Dive deep into a world of unmatched environmental simulation and reliability evaluation, complete with stable or variable temperature transitions and comprehensive humid heat analyses. Adhering rigorously to the prestigious Chinese national standards/T10586-2006 and T10592-2008, our cutting-edge humidity and heat test chambers guarantee unmatched precision, quality, and reliability.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant standard test requirements
Safety test of monomer battery:The temperature cycle test is conducted through the following meticulous steps
1.1 The monomer battery is charged in strict accordance with the 6.1.3 method, ensuring flawless execution.
1.2 The monomer battery is precisely positioned within the temperature chamber, meticulously calibrated following Table 1 and Figure 2. This procedure is diligently repeated for 5 cycles, with observational evaluations performed at 1-hour intervals.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 Temperature cycle test: Detailed specifications for temperature and time per single cycle
Battery module safety test:The temperature cycle test is executed through the following detailed steps
1.1.1 The battery module is charged with precision in strict adherence to the 6.1.4 method, ensuring flawless procedure.
1.1.2 The battery module is systematically placed within the temperature chamber, meticulously calibrated for 5 cycles as indicated in Table 1 and Figure 2.Continuous monitoring is executed over a 1-hour period for absolute precision.
The equipment meets these industry-leading testing standards
Our equipment meets and exceeds these illustrious national standards: National Standard/T2423.1-2008 Test A for Low Temperature, National Standard/T4243.2-2008 Test B for High Temperature (Partial), National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat, Chinese National Standard/T2423.4-2008 Test Decibel for Change and Damp Heat, and China National Standard/T2423.34-2012 Test Z/AnnoDominique. These comprehensive standards ascertain a complete integration of temperature and humidity assessments within the equipment's exceptional performance range.
Intricately engineered structure of the testing chamber
Crafted with extraordinary precision, the outer casing of the test box is fashioned from robust galvanized color steel plate, ensuring unmatched durability and longevity.
The inner boxes, a testament to exceptional craftsmanship, are fabricated with SUS304 stainless steel plates, ingeniously equipped with adjustable hanging hole strips for precise test track positioning. Insulated with a minimum of 10 cm of rigid polyurethane foam and glass wool, these layers guarantee optimal performance. The front doors, a marvel of engineering, boast high-quality electric wood chicken glass fiber board frames that provide outstanding low-temperature insulation, further enhanced by silicone foam sealing strips that withstand an extensive temperature range.
Efficient air circulation in experimental space:
A masterfully designed air supply system employs multi-blade aluminum wind turbines, resilient against extreme temperatures. Bolstered by powerful motors, air is adeptly directed to the upper louvers and returns from the bottom, upholding a deviation of less than 2 ºC across the -70~100 ºC range, benchmarked to international standards at 10 points.
Advanced controller operating system
Our system comes equipped with a state-of-the-art, low-power (8W) temperature and humidity control device, guaranteeing unparalleled precision in temperature regulation with accuracy reaching an astonishing ± 3 ºC.
1. High-resolution display screen:
Immerse yourself in a visual masterpiece with our 7-inch TET true color LCD resistive touch screen. This stellar display offers a remarkable resolution of 800 * 480, ensuring every detail is captured with crystal clarity.
2. Extensive Program Capacity: Experience the superior capabilities of our High Low Temperature Damp Heat Tester for Climate Testing Chamber. It boasts an extensive program capacity meticulously designed to meet the demands of the most complex testing scenarios.
Unleash the full potential of our advanced testing chamber, which boasts an impressive memory capacity. Easily manage up to 1000 programs and 1000 segments, with the capability to handle 999 total loops and 999 partial loops. Benefit from the unparalleled convenience of 10 sets of program linking functions. The real-time temperature curve display offers direct and easy access to all your queries, transforming your testing experience.
3. Expansive Data Storage Capacity: Discover the exceptional data handling capabilities of this chamber, crafted to manage comprehensive data volumes with unmatched ease and efficiency.
Effortlessly manage historical data with a robust storage operation spanning an impressive 300 days. Seamlessly upload data to your computer via a reliable network cable or directly load it into our sophisticated controller for optimal data management and accessibility.
4. Seamless Connectivity: Elevate your operations with unmatched connectivity solutions designed for efficiency and ease-of-use, powered by cutting-edge technology.
Benefit from the power of LAN standard Ethernet communication for seamless controller connection. This robust system supports connectivity for up to 16 devices through one comprehensive software setup. The outflow interface integrates smoothly with regional networks, allowing remote program control. Key features like real-time monitoring and historical curve playback enhance the user experience to extraordinary levels.
Sophisticated Heating and Humidification System: Explore this cutting-edge system engineered for superior performance and reliability.
Engineered with precision, this system utilizes bare wire nickel chromium alloy electric heating tubes, ensuring low thermal inertia and minimal heating overshoot. Enjoy high-precision fluctuations and superior performance through meticulously controlled power.
1. Cutting-edge Humidifier: Uncover the forefront of humidification technology with our advanced system, designed for unmatched uniformity and precision.
Our state-of-the-art humidification system ensures unparalleled consistency using a high-tech humidification cylinder with the boiler method for exceptional uniformity. The surface humidification with the water plate method expedites the process, enhancing precision and eliminating impurities like scale within the chamber. Perform admirably at low humidity, ensuring easy maintenance and cleaning. Crafted with a seamless stainless steel casing, the high-quality humidification tube boasts insulation resistance exceeding 50M Ω and includes a robust anti-dry burning controller for superior safety and peace of mind.
2. Maximizing Water Efficiency and Energy Conservation: Achieve new levels in sustainability and resource conservation with our meticulously designed system.
Featuring a spacious 25L front-mounted water tank with an intuitive quick-connection design, this system facilitates fast plug-in of water and electricity for effortless disassembly and maintenance. Deliver precise dehumidification across three distinct humidity zones, optimizing water usage and meeting rigorous national standards for high-temperature and humidity conditions like 85ºC and 85% RH. When the point cooling and dehumidification system is disabled, our innovative closed design significantly reduces water consumption, embodying the essence of sustainability.
Opt for equipment that stands out by exceeding the most demanding testing conditions, delivering unparalleled performance that truly stands out.
1. Optimal Circulating Air Mode Selection: Choose between Courtyard Air Supply or Variable Speed Motor for unmatched efficiency and adaptability tailored to your specific needs.
For products requiring precise wind speed control, this innovative solution offers strategic adaptability and precision, making it the perfect choice for your specific needs.
2. Optimal Water Supply System: RO Reverse Osmosis - Enhance your system with the pinnacle of water purity and reliability.
Our automatic system optimizes the humidification process by providing a pure, consistent water supply through an RO reverse osmosis system. Save valuable time and enjoy the convenience of this efficient solution, ensuring water purity and exceptional performance.
3. Advanced Polymer Film/Rotor Dehumidification System: Immerse yourself in our state-of-the-art dehumidification technology, meticulously designed and customized to satisfy your most stringent requirements.
If your testing mandates rigorous low-temperature and low-humidity conditions, our pioneering cellular chemical dehumidification system is the ultimate solution. With an extraordinary capability to operate at humidity levels as low as 10ºC/10% RH or even below, it effortlessly achieves the most challenging specifications with unparalleled performance.
4. LN.Two/ .LCO.2 LN.Two/ .LCO.2
We provide an extensive range of professional-grade products, exclusively sourced from the leading manufacturers in Europe and the United States. Trust in the unmatched quality and flawless reliability of our exceptional offerings, which are meticulously tailored to meet your every need with precision and expertise. LN.Two/ .LCO.2
Our expertly engineered solenoid valves and integrated control systems are crafted to meet your rapid testing requirements with precision. They offer accelerated testing capabilities and swift temperature reduction while ensuring precise control, delivering the outstanding performance you demand.
5. Ultrasonic Cooling and Humidification System: Attain superior testing outcomes under extreme conditions with our innovative system, designed for excellence.
Engineered for dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system is prepared to meet the most stringent standards. As an auxiliary device, it guarantees peak performance and unmatched reliability, ensuring your testing operations remain uncompromised even under the most demanding circumstances.
6. Premium Glass Inner Door with Manual Operation Port: Enhance your testing experience with this top-tier feature, designed for ultimate convenience and safety.
For seamless operations, even with frequent repositioning of test objects, our chamber is equipped with a premium glass inner door featuring a practical manual operation port (∧ 125Mm * Ea.). This innovative design significantly reduces the environmental impact of repeated chamber access, preserving the integrity of your testing conditions effortlessly.
7. State-of-the-Art Real-Time Test Data Recorder
In scenarios where precise temperature measurements of both the testing environment and test object are crucial, our certified recording solutions are indispensable. The tape recorder is meticulously engineered to satisfy all your data acquisition needs, ensuring every critical detail is captured with absolute precision and confidence.
8. Cutting-Edge Computer Connectivity and Operation Recording Software
Our uniquely designed connection software, customized for Mattel's environmental measuring machine kitchen, transforms convenience and feature-rich functionality. It facilitates the simultaneous monitoring of multiple machines, provides seamless data access from active devices, and offers users the most advanced electronic features available today.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}