State-of-The-Art Tester for Precision 3c Electronics Vibration Equipment
Product Description
Behold the unparalleled innovation of the Guangdong Humid Testing Chamber, masterfully crafted by Guangdong MENTEK Testing Equipment Co., Ltd. This state-of-the-art environmental simulation marvel is engineered with precision to accommodate a comprehensive spectrum of temperature tests. From electrical components to diverse products, parts, and materials, this chamber excels in constant, gradient, and rapid temperature fluctuations as well as wet heat evaluations. MENTEK's advanced chambers are meticulously designed to not only meet but exceed the rigorous benchmarks set by Chinese national standards T10586-2006 and T10592-2008. These standards assure unmatched reliability and elevate the chamber to a pinnacle of excellence and performance in the testing industry.
| M-series vibration testing system |
| Technical parameters of 7-ton vibration table body |
| Sinusoidal thrust |
7000kgf |
N×M
Allowable partial load moment |
>1100 |
| Random thrust |
7000kgf |
Equivalent mass of moving parts |
64kg |
(6ms)
Impact thrust |
14000kgf |
Load connection point |
17 |
| Frequency Range |
DC-2,500Hz |
Countertop screw size (standard) |
M12 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*200mm;8*400mm |
| Impact displacement |
63.5mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
1200kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
480mm |
(L×W×H)
Size (no packaging) |
1605mm×1130mm×1342mm |
| First order resonant frequency |
2250Hz |
Shaking table weight (no package) |
4500kg |
| Technical parameters of power amplifier |
Technical parameters of fan |
| |
|
| Maximum output power |
66KVA |
Fan power |
30KW |
| Signal to noise ratio |
>65dB |
Air volume |
1.42m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.094kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
200mm |
| System protection |
Featuring multiple performance protections |
(L×W×H)
Size (no packaging) |
990mm×1455mm×24680mm |
(L×W×H)
Size (no packaging) |
550mm×800mm×2070mm |
Weight (no packaging) |
510kg |
| Amplifier weight (without packaging) |
810kg |
|
|
| System working environment requirements |
Purchase configuration |
| temperature |
0-40ºC |
sliding table |
Vertical expansion of the table |
| humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3AC,380V±10%,50Hz,125KAV |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
Note:
1. With external dimensions meticulously calibrated, this chamber adapts seamlessly to diverse testing environments by adjusting the heating and cooling rates. This allows for a bespoke and efficient testing experience precisely tailored to meet your unique requirements.
2. The chamber's water cooling system is the epitome of efficiency, maintaining optimal cooling performance with water temperatures ranging from 10~28 ºC and a pressure between 0.1~0.3Mpa. This system not only ensures energy efficiency but is also perfectly suited for an extensive array of testing applications.
3. Transform the chamber's capabilities with the optional dampness and heat functionality, broadening its versatility to accommodate an even wider spectrum of testing conditions, thus extending its industrial applicability significantly.
4. The optional dry air blowing system provides tailored solutions to meet specific testing requirements, enhancing the chamber's adaptability and making it suitable for a variety of testing scenarios.
5. With the optional liquid nitrogen function, the chamber achieves rapid cooling at an astonishing rate of 30 ºC/min, catering to urgent testing demands with unparalleled speed and efficiency.
6. While the listed loads are standard, the chamber can be custom-engineered to fulfill specific client requirements, ensuring personalized and precise testing solutions that address unique industrial needs.
The equipment meets the following testing standards
Guangdong MENTEK's cutting-edge testing equipment is rigorously crafted to comply with an extensive array of standards. These include the National Standard/T2423.1-2008 for Low Temperature Testing, National Standard/T4243.2-2008 for Partial High Temperature, National Standard/T2433.3-2006 for Constant Humidity and Heat Testing, and Chinese National Standard/T2423.4-2008 for Change, Damp Heat Testing. Additionally, it adheres to China National Standard/T2423.34-2012 Test Z/AnnoDominique, accommodating a vast range of temperature and humidity scenarios. This impressive compliance guarantees consistent and exceptional testing outcomes, ensuring superior performance every time.
Structure of the testing chamber
The robust structure of the testing chamber boasts an outer shell constructed from premium galvanized color steel plate, offering exceptional durability and shielding against environmental impacts. This ensures longevity and steadfast performance even in the most challenging of conditions.
Inside, the chambers are equipped with SUS304 stainless steel plates, featuring adaptable hanging hole strips for versatile configurations. Each chamber is outfitted with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. Inner and outer box doors are seamlessly joined using high-grade electric wood chicken glass fiber board frames, providing outstanding low-temperature insulation. The silicone foam door sealing strip, ingeniously crafted with dual channels, delivers exceptional temperature resistance, ensuring peak efficiency throughout the testing process.
Experimental space air circulation:
Experience the transformative power of our chamber's sophisticated air supply system. Incorporating high and low-temperature resistant, multi-blade aluminum wind turbines expertly driven by motors, this system ensures harmonious airflow. Air circulation is achieved through upper louvers and lower returns, maintaining uniform temperatures with precision to less than 2 ºC over an impressive range of -70~100 ºC. Assessed at a global standard of 10 points, this system guarantees consistent and reliable test results that uphold international excellence.
Controller Operating System
Our system, a marvel of modern engineering, integrates a state-of-the-art low-power (8W) temperature and humidity control device, pushing the boundaries of precision. With a temperature control accuracy of ±3 ºC, users experience a level of control and stability that is truly unparalleled, ensuring operations run with an unprecedented level of smoothness and seamlessness.
1. High Resolution Screen:
Immerse yourself in a visual journey unmatched by any other with our premium 7-inch TET true-color LCD resistive touch screen. Boasting a resolution of up to 800 * 480, this screen provides not only crystal-clear visibility but also effortless usability, taking the user experience to extraordinary new heights.
2. Exceptional Program Capacity:
Crafted with expansive memory, this cutting-edge system effortlessly houses up to 1000 programs with 1000 segments. Supporting 999 total and partial loops, alongside 10 program links and real-time temperature curve displays, it dramatically boosts operational efficiency and data management, streamlining queries and analysis with ease.
3. Unmatched Data Storage Capability:
Enjoy seamless data management with the extraordinary ability to oversee historical data for up to 300 days. Easily upload data through hard disk, network cable, or directly into the controller, ensuring uninterrupted accessibility and complete control at your fingertips, all the time.
4. Effortless Connectivity:
Experience unparalleled control with our sophisticated controller featuring LAN-standard Ethernet communication. Effortlessly manage an impressive array of up to 16 devices from a singular software platform. Our outflow interface ensures seamless local network integration, making remote program management and real-time monitoring a breeze.
Heating and Moisture Control System
Elevate your heating efficiency with our cutting-edge bare wire nickel-chromium alloy electric heating tubes. These are meticulously crafted for minimal thermal inertia and deliver impeccable temperature control. Paired with advanced power controls, this system guarantees optimal heating performance, meticulously tailored to meet your specific testing needs.
1. Cutting-Edge Humidification System:
Revolutionize your testing with our trailblazing humidification technology. Featuring a sophisticated humidification cylinder that utilizes a reliable boiler method, it ensures even moisture distribution. Our innovative water plate surface humidification offers rapid, precise control, removing impurities such as scale-perfect for low humidity dyeing processes. Constructed from seamless stainless steel, the humidification tube offers over 50M Ω insulation resistance, coupled with a robust anti-dry burning controller for enhanced safety.
2. Maximized Water Efficiency and Energy Conservation:
Maximize operational efficiency with our innovative front-mounted 25L water tank and quick-connect system designed for seamless management. Easily disassemble for cleaning to achieve precise dehumidification control across three humidity zones. Compliant with national standards for high temperature and humidity, this design significantly reduces water usage, promoting sustainable and environmentally-friendly operations.
Select equipment engineered to excel in the most demanding testing environments, ensuring unparalleled reliability and outstanding performance every time.
1. Select the Circulating Air Mode: Opt for Courtyard Air Supply or Variable Speed Motor.
For products necessitating specific wind conditions, this customizable solution offers precision and adaptability, guaranteeing optimal performance and ensuring that each operation meets your specific requirements perfectly.
2. Optimum Water Supply System: RO Reverse Osmosis
For precise humidification, our avant-garde equipment ensures a continuous, pure water flow through an automated process, delivering unmatched convenience and efficiency finely tuned to meet your exact needs.
3. State-of-the-Art Polymer Film/Rotor Dehumidification System: Dive into the forefront of modern engineering with our state-of-the-art dehumidification system. Specifically engineered for superior performance, this technology exemplifies unmatched precision and efficiency, consistently delivering exceptional results with every single use.
In the most challenging extended testing conditions, especially in environments marked by low temperatures and humidity, our advanced cellular chemical dehumidification system remains unparalleled. It expertly manages a broad humidity spectrum, achieving an impressive 10 °C/10% RH, or even lower, surpassing the highest industry standards with extraordinary efficiency and remarkable effectiveness.
4. LN.Two/ .LCO.2: Introducing a superbly engineered dual-component solution that redefines precision and sets new industry benchmarks. Crafted with unparalleled excellence, it's a revolutionary standard-bearer that transforms expectations in the field.
Step into the pinnacle of professional excellence, where elite products meet unmatched standards. Our meticulously curated offerings, sourced from the finest European and American manufacturers, guarantee a blend of superior quality, reliability, and exquisite craftsmanship. Choose us for products that epitomize excellence and deliver uncompromising performance. LN.Two/ .LCO.2: Discover an engineering marvel that embodies precision and reliability, setting a new gold standard in performance excellence. This integrated system not only breaks boundaries but also establishes an unparalleled benchmark for technological advancement, making it difficult for any competitor to surpass.
Unleash the power of our top-tier solenoid valves and avant-garde control systems, designed to meet your most critical testing needs effortlessly. Experience rapid thermal acceleration and precise temperature control, propelling your testing processes to extraordinary levels of precision and effectiveness.
5. Sophisticated Ultrasonic Cooling and Humidification System: Engineered for optimal performance, this state-of-the-art system adeptly manages significant heat loads, ensuring continuous excellence and steadfast reliability in operations.
Confront the challenges of dynamic testing in high-temperature, high-humidity environments with our trailblazing ultrasonic cooling and humidification system. Engineered for precision, it excels as an auxiliary component, ensuring exceptional performance and reliability even under the most demanding conditions.
6. Include a Glass Inner Door for Manual Operation Access: This eco-conscious design minimizes environmental impact while enhancing the accuracy and reliability of your testing processes. It represents an ideal synergy of functionality and sustainability, elevating your testing efficiency.
Our innovative design features a glass inner door (∧ 125Mm * Ea.) to minimize environmental impact during frequent testing or object handling. This cutting-edge feature reduces disruptions from frequent door openings, enhancing the fidelity and precision of testing outcomes.
7. State-of-the-Art Real-Time Test Data Collection and Recording: Embrace cutting-edge technology with our advanced system, designed for real-time data capture and recording with unparalleled speed and precision. This feature provides accurate, reliable data throughout your testing journey, empowering you with crucial insights.
Experience the unmatched precision and reliability of our state-of-the-art tape recorder, meticulously designed for environments where accuracy is paramount. It excels in recording a plethora of temperature metrics concurrently, effortlessly exceeding rigorous industry standards with remarkable precision and efficiency.
8. Advanced Computer Connection Operation Recording Software: Elevate your operations with our comprehensive software, seamlessly integrating computer connectivity for extensive recording capabilities. It optimizes machine integration, setting new benchmarks in process efficiency and performance.
Exclusively tailored for Mattel's environmental measurement machine suite, our pioneering connection software enhances user experience with advanced features like seamless multi-machine monitoring and rapid data retrieval. Its premium electronic attributes ensure intuitive and efficient usability.
Innovative Structural Technology: Enter a domain where groundbreaking design meets structural excellence, offering transformative innovation that redefines modern perspectives. Renowned for durability, this technology significantly influences the landscape of structural design.
1. Our Company's Premier Hardware Equipment: Explore an extraordinary array of machinery from Germany and Taiwan, featuring the prestigious AMADA AIRS.-255NT Punching system. Equipped with innovative carbon oxide and argon welders, each model exemplifies precision and innovation, setting new standards in manufacturing excellence.
Delve into our exceptional collection of top-tier machinery, sourced from the technological leaders of Germany and Taiwan. Our distinguished portfolio features the renowned AMADA AIRS.-255NT Punching system, a beacon of precision and innovation. Complemented by advanced carbon oxide and argon welders, it redefines accuracy. Harness the transformative capabilities of Autodesk Inventor 3D software, ushering in a new era in sheet metal design, virtual assembly, and disassembly, elevating manufacturing to unprecedented heights of brilliance and efficiency.
2. Our enclosure is a marvel of engineering prowess, skillfully crafted from robust galvanized steel, lauded for its unparalleled durability. With a chic electrostatic powder spray baking paint finish, it guarantees enduring protection while radiating a captivating visual charm, harmoniously blending strength with elegant sophistication.
Three.. The inner box is a design triumph, expertly sculpted from high-grade imported SUS #304 stainless steel. Its sturdy build, featuring seamless full argon arc welding, assures an airtight seal even under extreme heat and humidity. The ingeniously rounded corners facilitate efficient condensate drainage, boosting the device's performance and reliability, ensuring smooth operation in challenging conditions.
Revolutionary Refrigeration System Technology: Welcome to the future with our avant-garde 3D-optimized management system, bolstered by state-of-the-art frequency conversion control technology. This groundbreaking advancement delivers unmatched precision and adaptability in thermal management, offering remarkable flexibility and efficiency, setting an unprecedented standard for refrigeration excellence and operational preeminence.
Introducing our pioneering refrigeration system, the epitome of advanced technology. With revolutionary 3D-optimized management and sophisticated frequency conversion control, this system guarantees ultimate precision and adaptability, offering extraordinary flexibility and excellence in temperature regulation, revolutionizing the benchmarks for thermal management success.
Experience the brilliance of our variable frequency refrigeration system, where cutting-edge technology converges with meticulous engineering. Our smart frequency converter skillfully modulates the compression speed while maintaining a constant 50HZ power supply frequency. By analyzing real-time test chamber loads and dynamically adjusting compressor frequency to temperature changes, this system achieves remarkable energy efficiency, ensuring outstanding cooling performance and operational excellence.
Discover the unrivaled stability of our test chamber's variable frequency refrigeration system, where meticulous engineering ensures a flawlessly regulated temperature environment with minimal fluctuations. This state-of-the-art system balances suction and exhaust pressures, optimizing operational stability, delivering remarkable, reliable performance with every use, and setting a new benchmark for consistency and precision.
Engage with the perfect blend of energy-efficient refrigeration technology and innovative energy-saving enhancements. Designed with precision, this system elevates performance while dramatically reducing resource usage. It establishes new standards for sustainability and efficiency, steering towards a more environmentally responsible future, leading the industry in green innovation.
1. Unleash the potential of PID and PWM-driven VRF technology, featuring advanced electronic expansion valves for unparalleled thermal flow control. Enjoy superior low-temperature energy efficiency as these systems expertly manage refrigerant flow, ensuring smooth operation without the need for auxiliary heating, embodying the pinnacle of precision and operational efficiency.
Achieve seamless automatic temperature stability with our advanced three-way flow regulation, adeptly managing refrigeration, cold side, and heating side pipelines. This cutting-edge approach excels in maintaining peak performance even in low-temperature settings, reducing energy consumption by 30%, and significantly enhancing overall operational efficiency, setting new benchmarks for precision and effectiveness.
Immerse yourself in cutting-edge technology with the integration of the Danish Dan-foss Company's ETS System electronic expansion valve. This revolutionary innovation allows dynamic adjustments in refrigeration capacity, flawlessly adapting to varying cooling demands and optimizing compressor efficiency, thereby achieving exceptional performance and efficacy.
2. Introducing our state-of-the-art dual compressor group design technology, featuring intuitive automatic start-stop functionality. This advanced system intelligently adjusts to load conditions to maximize efficiency, highlighting our innovative series design and unwavering commitment to performance excellence, ensuring operational superiority and dependability.
Our refrigeration unit artfully combines a binary compound of semi-closed compressors with a fully dense single-stage system. This intricate architecture adeptly responds to load demands, providing optimal cooling capacity while significantly prolonging the life of compressors, guaranteeing enduring reliability and longevity, setting a new standard for durability.
Innovative Cold Circuit Technology: Embark on an extraordinary journey with cold circuit technology, where revolutionary designs redefine industry standards, elevating system efficiency to unprecedented levels. This embodies the future of refrigeration technology, driven by an unwavering pursuit of excellence and innovation, setting new frontiers for technological advancement.
Our power distribution layout is a masterpiece of meticulous craftsmanship, reflecting unparalleled attention to detail and the zenith of industry standards. By meticulously following the blueprints created by our expert technical team, we integrate top-tier components from globally acclaimed electrical brands, ensuring outstanding reliability and peak performance. This unwavering dedication to quality and precision not only sets an industry benchmark but places our products at the cutting edge of technological innovation, delivering enduring value and excellence.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly weave the excellence of renowned brands like Omron, Sch-neider, and Germany's Phoenix Terminal block into our sophisticated designs. Our steadfast dedication to precision shines through with every line code precisely labeled, facilitating seamless operation and an impeccable user experience. By prioritizing top-notch quality, we selectively partner with only the most reputable Chinese brands, guaranteeing unmatched performance and lasting durability.
By opting for the prestigious Pearl River Cable, we ensure our wiring exemplifies outstanding quality and superior performance. Our control lines are crafted with a minimum of 0.75 Square RV soft copper wire, famed for its excellent conductivity. Each load-critical element, including motor compressors, is engineered to adhere to stringent EC standards. The trap diameters are tactically designed to meet cable groove wiring safety current standards. Moreover, the machine's cable port is expertly sealed to thwart frost-induced short circuits, safeguarding the terminal inside the junction box.
Every terminal fixing screw is fastened with exact torque, assuring strong and stable connections. This meticulous attention to detail substantially reduces risks such as loose fires, enhancing both safety and reliability. Our unrelenting commitment to precision not only provides peace of mind but also establishes a new paradigm for superior quality, thereby boosting product integrity.
Refrigeration Series Process: An In-Depth and Meticulous Journey
1. Standardization: Charting the Course for Unmatched Excellence
1.1 Our outstanding steel pipe piping process, combined with stringent welding standards, epitomizes our unwavering dedication to achieving unmatched reliability and excellence.
By meticulously adhering to precisely standardized pipe configurations, we ensure consistent stability and unwavering reliability in our systems. This pursuit of excellence results in remarkable functionality that stands the test of time, providing peace of mind and enduring value.
1.2 Experience seamless steel pipe bends with our cutting-edge Italian-imported pipe bending technology. This state-of-the-art machinery minimizes welding points and reduces oxide build-up inside the tubes during welding, resulting in enhanced reliability and durability across the entire system, setting new benchmarks in quality and efficiency.
Placing System Reliability at the Core of Our Projects
Pioneering Shockproof Design with Exceptional Pipeline Support
2.1 At Meitec, we adhere to the highest standards in protecting refrigeration copper pipes from shocks and potential damage. Through comprehensive seismic scenario assessments, we incorporate arc bends and uniquely engineered nylon fixed clamping systems. These innovations prevent deformation and leakage caused by circular vibrations and temperature fluctuations, escalating the system's reliability and robustness to unparalleled levels.
Reinforcing Reliability Throughout the Entire Refrigeration System
2.2 Pioneering an Oxidation-Free Welding Procedure
The purity of a refrigeration system's pipeline is crucial to its efficiency and longevity. Metco employs an exacting charging welding procedure that significantly cuts down excess oxide contamination, ensuring the system operates consistently at peak performance and prolonging its lifespan.
Through precise and diligent practices, Metco significantly boosts the efficiency and longevity of the refrigeration system. By minimizing oxide pollution during welding, we optimize the system's reliability and performance, setting a new standard for industry excellence.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}