High Precision Battery Impact Testing Table for Accurate Evaluations
Product Description
Step into a new era of precision testing with our extraordinary High Performance Temperature Humidity Chamber. This versatile marvel is expertly crafted for unrivaled high and low-temperature assessments across a vast spectrum of electrical products, components, and materials. Our chamber's environmental simulation reliability testing encompasses constant gradient, sudden mutation, and wet heat evaluations, delivering holistic solutions for the most demanding testing scenarios. Developed with pride by MENTEK, these chambers strictly adhere to Chinese national standards T10586-2006 and T10592-2008, guaranteeing exceptional accuracy and reliability.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: Every dimension can be intricately tailored to meet your unique specifications, ensuring a perfect fit for your testing requirements.
Relevant Standard Test Requirements
Our equipment is compliant with the esteemed standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014, ensuring the highest levels of safety and reliability.
Please refer to section 4.5 for the sample. As per the prescribed test method, conduct the acceleration impact test once fully charged. This comprehensive test is executed sequentially in three mutually perpendicular directions. Detailed testing methodology is elaborated in section 7.4 for your convenience.
Following the completion of the experiment, perform one full discharge and charging cycle, adhering to the charging and discharging method specified in section 4.5. The sample must exhibit no ignition, explosion, or leakage, guaranteeing unmatched safety and reliability.
Our state-of-the-art equipment adheres to the following stringent testing standards, ensuring uncompromising quality and performance:
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat China National Standard/T2423.34-2012 Test Z/AnnoDominique: Combination temperature and humidity tests within the equipment's impressive performance range.
Structure of the Testing Chamber
Constructed with exceptional durability and extended lifespan in mind, the testing chamber's robust exterior is expertly crafted from galvanized color steel plates.
The interior is meticulously engineered with SUS304 stainless steel, featuring side-mounted adjustable hanging hole strips alongside a versatile test track frame. At least 10 cm thick layers of rigid polyurethane foam and glass wool provide superior thermal insulation. The interface between the inner and outer doors is constructed with premium-grade electric wood chicken glass fiber board frames, ensuring optimal low-temperature insulation. The door's sealing strip, made from double-channel series silicone foam, offers outstanding wide temperature resistance.
Advanced Experimental Space Air Circulation
Our advanced air supply system incorporates multi-blade aluminum wind turbines, masterfully engineered to withstand extreme temperatures. Powered by motors, these turbines efficiently channel air to the upper louvers, with return flow from the bottom, ensuring remarkable uniformity of less than 2 º C throughout the extensive range of -70~100 º C, setting a precision benchmark recognized globally.
Controller Operating System
Harness the power of our cutting-edge low-power (8W) temperature and humidity control device, achieving superior temperature control precision of up to ± 3 º C. This guarantees reliable and consistent performance, meeting the highest standards of excellence.
1. High Resolution Screen:
Experience sharp, vivid visuals on our 7-inch TET true color LCD resistive touch screen, boasting an impressive resolution of 800 * 480, offering unparalleled clarity and ease of use.
2. High Program Capacity:
With an expansive memory capacity capable of storing 1000 programs/1000 segments, 999 total loops, and 999 partial loops, our system offers 10 sets of program linking functions, complete with real-time temperature curve displays for quick and efficient query access.
3. High Data Storage Capacity:
Effortlessly manage and archive 300 days' worth of historical data in storage operation mode by directly uploading to a hard disk or network cable. Alternatively, fully integrate it into the controller for smooth and seamless data management, ensuring optimal accessibility and security.
4. Easy Connection:
Step confidently into the future of seamless connectivity with our cutting-edge controller. Meticulously crafted to redefine communication, it comes outfitted with LAN standard Ethernet capabilities, effortlessly synchronizing with up to 16 devices through an intuitive software platform. Revolutionize your operations with easy integration into regional networks via the machine's outflow interface, granting you the transformative power of remote program control. Enjoy the luxury of real-time monitoring and the ability to replay historical curves, offering an unmatched level of oversight and comprehensive control right at your fingertips.
Heating and Humidification System
Our expertly engineered system, forged from bare wire nickel chromium alloy electric heating tubes, sets a new standard for precision and efficiency. Experience the benefits of minimal thermal inertia and negligible heating overshoot, ensuring the flawless precision in fluctuation control your operations demand.
1. Humidifier:
Discover the pinnacle of precision and uniformity with our advanced humidification system. Utilizing the boiler method humidification cylinder, it promises unrivaled consistency, while the surface humidification approach enables rapid operation with unmatched control precision. This innovative system effectively eliminates impurities like scale within the chamber, boasting exceptional dyeing capabilities and outstanding low humidity performance. With its seamless stainless steel shell and insulation resistance exceeding 50M Ω, maintenance becomes a breeze. An advanced anti-dry burning controller further elevates safety, making this system a true masterpiece of engineering excellence.
2. Optimizing Water Usage and Energy Efficiency:
Unleash ultimate convenience with our 25L high-capacity water tank. Thoughtfully designed with a front-mounted quick connection system, it simplifies water and electricity connections for effortless disassembly and cleaning. Achieve exceptional dehumidification precision across three distinct humidity zones, substantially conserving water while adhering to rigorous national standards for high temperature and humidity environments, reaching up to 85 º C and 85% RH. Its closed design, with point cooling and dehumidification systems deactivated, dramatically reduces water consumption, setting a new benchmark for efficiency.
Invest in unparalleled equipment, meticulously engineered to thrive under the most demanding testing conditions, guaranteeing exceptional performance and unwavering reliability.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
For scenarios where precise wind speed specifications are critical, our specialized solutions offer the perfect fit. Custom-designed to meet your distinctive requirements with impeccable precision, ensuring seamless alignment with your operational needs.
2. Select the Right Water Supply System: RO Reverse Osmosis
Embrace the purity of water for all your humidification needs with our sophisticated automatic water production system. This state-of-the-art equipment ensures a steady supply of pure water, saving you valuable time while providing unmatched convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
For rigorous operations necessitating sustained low-temperature and low humidity testing, our advanced cellular chemical dehumidification system is an essential asset. It delivers an impressive humidity range reaching as low as 10 º C/10% RH, effortlessly meeting even your most exacting requirements.
4. LN.Two/ .LCO.2
Explore our expertly curated collection of professional products, sourced from Europe and the United States. Available in a comprehensive range of complete specifications, these products are tailored to precisely meet your specific needs. LN.Two/ .LCO.2
Our cutting-edge solenoid valves and integrated control systems are designed specifically to meet your rapid testing needs. Engineered for swift acceleration and effective temperature control, they ensure your testing processes are both quick and precise.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Designed to tackle the challenges of dynamic high heat load testing in extreme temperature and humidity environments, our ultrasonic cooling and humidification system meets these rigorous demands with precision and reliability. It stands as a crucial auxiliary solution, ensuring your operations remain productive and effective.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Facilitate seamless operation and effortless handling of the test subject with our practical manual operation feature, expertly crafted to provide through-the-glass access (∧ 125Mm * Ea.). This cutting-edge design serves to significantly reduce environmental impact when accessing the chamber, ensuring that every operation is conducted with remarkable efficiency and precision, catering to the needs of high-precision evaluations.
7. Real-Time Data Acquisition Recorder
Our advanced recorders are ingeniously crafted to meet the most rigorous industry standards, guaranteeing unmatched accuracy in capturing concurrent temperature data from both the testing environment and the test object. By integrating a high-performance tape recorder, we ensure these precise recording requirements are met with exceptional accuracy, setting pioneering standards in the industry.
8. Sophisticated Computer Connection and Operation Recording Software
2fcf7e28
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}