Advanced Climate Simulation Equipment for Humid Temperature Testing Environmental Analysis Tetser
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber, a marvel in environmental simulation crafted with versatility and precision in mind. This state-of-the-art chamber is engineered to perform high and low-temperature tests on a broad spectrum of electrical components, diverse products, parts, and materials. Whether your testing needs are for constant, gradient, rapid fluctuation temperatures, or wet heat assessments, MENTEK's advanced chambers are meticulously designed to meet and exceed Chinese national standards T10586-2006 and T10592-2008, ensuring unmatched reliability and performance.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are determined according to the heating and cooling rate
2. Water cooling type (water temperature 10~28 ºC, water pressure 0.1~0.3Mpa to ensure cooling performance)
3. Can increase the function of dampness and heat
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30 ºC/min)
6. The above loads are standard loads and can be designed according to customer requirements.
The equipment meets the following testing standards
Our cutting-edge testing equipment strictly adheres to an array of rigorous standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Notably, it also complies with the China National Standard/T2423.34-2012 Test Z/AnnoDominique, thereby supporting a vast array of temperature and humidity scenarios within its comprehensive performance capabilities.
Structure of the testing chamber
The formidable structure of the testing chamber features an outer shell fashioned from premium galvanized color steel plate, ensuring durability and superior protection.
Internally, the chambers boast SUS304 stainless steel plates with adaptable hanging hole strips for dynamic configurations. Each chamber is outfitted with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are securely linked using high-quality electric wood chicken glass fiber board frames, providing exceptional low-temperature insulation. The silicone foam door sealing strip, designed with dual channels, showcases remarkable temperature resistance.
Experimental space air circulation:
Harnessing a sophisticated air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, driven by motors. These turbines deftly circulate air through upper louvers and return it from the bottom, preserving a temperature uniformity of less than 2 ºC over an impressive range of -70~100 ºC, evaluated at an international standard of 10 points.
Controller operating system
The system is integrated with a leading-edge, low-power (8W) temperature and humidity control device, achieving remarkable accuracy with a temperature control precision of ±3 ºC.
1. High resolution screen:
Immerse yourself in vivid detail with a 7-inch TET true-color LCD resistive touch screen, offering an impressive resolution of up to 800 * 480 for crystal-clear visibility.
2. High program capacity:
Boasting a vast memory, it can store an impressive 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays for effortless queries and analysis.
3. High data storage capacity:
Seamlessly transfer historical data spanning up to 300 days by uploading directly via hard disk or network cable to your computer, or effortlessly load it into the controller for continuous access.
4. Seamless Connectivity:
Effortlessly maintain control with our cutting-edge controller, featuring LAN standard Ethernet communication. Seamlessly manage up to 16 devices through a unified software platform. The outflow interface enables smooth integration into local networks, offering the luxury of remote program management, real-time monitoring, and effortless access to historical data with unparalleled convenience.
Heating and Moisture Control System
Unlock superior heating efficiency with our groundbreaking bare wire nickel-chromium alloy electric heating tubes. Designed for minimal thermal inertia and negligible heating overshoot, these tubes promise exceptional precision in temperature control. Enhanced by state-of-the-art power controls, this system ensures optimal heating performance tailored to your testing requirements.
1. Advanced Humidification System:
Transform your testing experience with our revolutionary humidification technology. Our state-of-the-art humidification cylinder employs the reliable boiler method, ensuring exceptional moisture uniformity. For those requiring swift and precise control, our water plate surface humidification delivers unmatched speed and accuracy, effortlessly eliminating impurities like scale. Ideal for dyeing applications, it excels in low humidity settings, ensuring effortless maintenance. Crafted from seamless stainless steel, the humidification tube features insulation resistance surpassing 50M Ω, paired with a robust anti-dry burning controller for enhanced safety.
2. Water Efficiency and Energy Conservation Maximized:
Experience the convenience of our front-mounted 25L capacity water tank, thoughtfully designed with a quick-connect system for efficient water and power management. Enjoy effortless disassembly and cleaning to ensure precision. Attain precise dehumidification control across three distinct humidity zones, adhering to stringent national standards for high temperature and humidity conditions at 85 º C and 85% RH. Our advanced sealed design, which deactivates point cooling and dehumidification systems, drastically reduces water consumption, fostering sustainable operation.
Invest in equipment designed for the most challenging testing environments, ensuring unparalleled reliability and superior performance.
1. Choose the Circulating Air Mode: Select Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution provides precision and adaptability, guaranteeing optimal performance tailored to your needs.
2. Optimal Water Supply System: RO Reverse Osmosis
When precise humidification is crucial, our equipment ensures a continuous supply of pure water through an automated production process, offering maximum convenience and time efficiency.
3. Advanced Polymer Film/Rotor Dehumidification System
For rigorous long-term testing in low-temperature and low-humidity environments, our advanced cellular chemical dehumidification system is the ultimate solution. It accommodates a broad humidity range down to 10 º C/10% RH or lower, meeting the most stringent demands.
4. LN.Two/ .LCO.2
We provide top-tier professional products with a wide array of specifications, sourced directly from renowned manufacturers in Europe and the United States. LN.Two/ .LCO.2
Harness our solenoid valves and advanced control systems to meet your urgent testing needs with rapid thermal acceleration and precise temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic testing under high heat loads in elevated temperature and humidity conditions, our groundbreaking ultrasonic cooling and humidification system is designed to overcome these challenges. Utilize it as a supplementary component to achieve peak performance.
6. Integrate a Glass Inner Door for Manual Operation Access
To minimize environmental impact during frequent testing or object movement, facilitate manual operations through a glass inner door (∧ 125Mm * Ea.). This innovative design significantly minimizes disruptions from frequent door openings, enhancing testing integrity.
7. Real-Time Test Data Collection and Recording
In environments where precision and dependability are absolutely essential, our tape recorder stands unmatched. Designed for the simultaneous capture of multiple temperature readings, it is crafted to not just meet but exceed the most stringent specification standards, ensuring that your operations are always managed with the highest level of expertise and accuracy.
8. Next-Generation Advanced Computer Connection Operation Recording Software
Specially created for integration with Mattel's suite of environmental measuring machines, our state-of-the-art connection software provides users with enhanced functionalities like never before. Enjoy seamless monitoring across multiple machines, efficient data retrieval from operational units, and sophisticated electronic features that elevate usability to unprecedented heights.
Pathbreaking Structural Innovation and Technology
1. Our Company's Premier Hardware Equipment Lineup:
Unveiling our advanced collection of German and Taiwan-imported machinery, highlighted by the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding machines, each model is a testament to precision and innovation. Mastery over multiple Autodesk Inventor 3D drawing software applications allows for cutting-edge sheet metal design, virtual assembly, and disassembly, setting a new standard in modern manufacturing excellence.
2. Constructed from top-tier galvanized steel, the shell is designed for exceptional durability, further augmented with a cutting-edge electrostatic powder spray baking paint finish. This ensures lasting protection and a sophisticated aesthetic appeal.
Three.. Thoughtfully designed with imported SUS #304 stainless steel, the inner box is crafted using a full argon arc welding process to prevent high-temperature and high-humidity air leakage. Its rounded corners facilitate efficient condensate drainage, thereby optimizing overall performance.
Revolutionary Advances in Refrigeration System Technology
Our expertly 3D-optimized refrigeration system management, featuring cutting-edge frequency conversion control technology, delivers precise and flexible thermal regulation, ensuring unmatched adaptability across various conditions.
Inside our variable frequency refrigeration system, despite a consistent power supply frequency of 50HZ, the frequency converter intelligently adjusts the compression speed. It customizes cooling output based on real-time test chamber loads, dynamically modifying compressor frequency as chamber temperatures fluctuate, boosting energy efficiency and ensuring rapid cooling for outstanding performance.
Experience the flawless stability offered by our test chamber's variable frequency refrigeration system, which maintains a consistent temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, enhancing operational consistency for superior performance.
Take advantage of our energy-efficient refrigeration system technology, complemented by pioneering energy-saving innovations, designed to maximize performance while significantly reducing resource consumption.
1. Leverage the power of PID and PWM-driven VRF technology, utilizing electronic expansion valves for optimal thermal flow control. Achieve remarkable low-temperature energy efficiency with PID + PWM systems, enhancing refrigerant flow regulation and ensuring effective operation without the need for auxiliary heating.
With precise three-way flow adjustments across the refrigeration, cold, and heating side pipelines, automatic temperature constancy is achieved. This technique excels in maintaining peak performance even in low-temperature conditions, cutting energy consumption by 30% and optimizing overall efficiency.
Our technology, powered by the Danish Dan-foss Company's ETS System electronic expansion valve, offers dynamic refrigeration capacity adjustments. It adapts to varying cooling rates, fine-tuning compressor cooling capacity for superior efficiency.
2. Utilizing a dual compressor group design technology, automatic start-stop functionality is in sync with load conditions to maximize efficiency, made feasible through our advanced series design.
The refrigeration unit includes a binary compound of semi-closed compressors alongside a fully dense single-stage system. It intelligently adapts to load demands, ensuring optimal cooling capacity and prolonging compressor life.
Innovative Technological Advancements in Cold Circuit Technology
Power distribution layout is meticulously executed according to blueprints from our technical department, using globally recognized electrical component brands to ensure unmatched reliability and performance.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly incorporate time-honored brands such as Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is clearly marked for ease of use and reliability, as we select only the finest Chinese brands to guarantee top-tier performance and durability.
Choose Pearl River Cable, a symbol of excellence and reliability, for unmatched wire quality and performance. Our control lines feature 0.75 Square RV soft copper wire, ensuring superior conductivity. Essential components like motor compressors comply with rigorous EC standards, with trap diameters designed for cable groove wiring safety. The machine's cable port is expertly sealed to prevent frost-induced short circuits, safeguarding the terminal in the junction box from potential damage.
Each terminal fixing screw is meticulously connected using a standard fixed torque, providing secure and swift connections while preventing risks such as loose fires. This detailed craftsmanship greatly enhances safety and reliability.
Refrigeration Series Process: A Comprehensive and Integrated Approach
1. Standardization: Leading the Way to Superior Excellence
1.1 Our precise steel pipe piping process, combined with stringent welding standards, highlights our commitment to exceptional quality and unrivaled reliability.
By consistently following standardized pipe layouts, we ensure the steadfast stability and trustworthy reliability of our model systems.
1.2 Utilizing state-of-the-art Italian pipe bending technology, we achieve flawless steel pipe bends. This innovation significantly reduces the need for welding points and minimizes oxide formation during welding, enhancing system reliability.
Putting System Reliability at the Forefront
Pioneering Shockproof Design and Durable Pipeline Support
2.1 At Meitec, we uphold strict standards for supporting and preventing shock in refrigeration copper pipes. By considering seismic scenarios, we implement arc bends and specialized nylon clamps to protect against deformation and leakage from vibration and temperature fluctuations, thereby boosting reliability.
Enhancing Reliability Across the Entire Refrigeration System
2.2 Advanced Oxidation-Free Welding Technique
The cleanliness of a refrigeration system's pipeline is critical to its efficiency and durability. Metco uses a standardized welding procedure to prevent excess oxide contamination, ensuring optimal performance.
Metco enhances refrigeration system efficiency and extends operational lifespan by reducing oxide pollution during welding, thereby maximizing both reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}