Climate Simulation Equipment for Rapid Humid Temperature Change Testing Environmental Analysis Tester
Product Description
1. The humidity control function can be selected. The temperature rise and fall rate is adjustable. Maximum rate can reach 20ºC/min, auxiliary liquid nitrogen refrigeration can reach 30ºC/min;
2. Equipped with a frequency converter, the wind speed can be adjusted. It can be set to reduce in a constant state. Wind speed; Optional dry air blowing system. Prevent condensation in the box and samples frost;
3. Cold output energy-saving design, recognized by third-party testing institutions. In the major refrigeration department. Unified middle school. The energy-saving effect is very significant.
Main Parameters
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC) - 70+150ºC(-55+80ºC) |
| Temperature fluctuation |
±0.3ºC±0.5ºC |
| Temperature deviation |
± |
| Humidity deviation |
±3%RH(<75%RH)±5%RH (≤75%RH) |
| Heating and cooling rate |
5/10/15/20ºC/min |
| Standard load (aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window (mm) |
300*400/400*600 |
| Test hole (mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size (cm) |
Width |
70 |
80 |
100 |
130 |
| Height |
80 |
90 |
100 |
115 |
| Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V 50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are determined according to the heating and cooling rate
2. Water cooling type (water temperature 10~28ºC, water pressure 0.1~0.3Mpa to ensure cooling performance)
3. Can increase the function of dampness and heat
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30ºC/min)
6. The above loads are standard loads and can be designed according to customer requirements.
Pathbreaking Structural Innovation and Technology
1. Our Company's Premier Hardware Equipment Lineup:
Unveiling our advanced collection of German and Taiwan-imported machinery, highlighted by the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding machines, each model is a testament to precision and innovation. Mastery over multiple Autodesk Inventor 3D drawing software applications allows for cutting-edge sheet metal design, virtual assembly, and disassembly, setting a new standard in modern manufacturing excellence.
2. Constructed from top-tier galvanized steel, the shell is designed for exceptional durability, further augmented with a cutting-edge electrostatic powder spray baking paint finish. This ensures lasting protection and a sophisticated aesthetic appeal.
Three.. Thoughtfully designed with imported SUS #304 stainless steel, the inner box is crafted using a full argon arc welding process to prevent high-temperature and high-humidity air leakage. Its rounded corners facilitate efficient condensate drainage, thereby optimizing overall performance.
Revolutionary Advances in Refrigeration System Technology
Our expertly 3D-optimized refrigeration system management, featuring cutting-edge frequency conversion control technology, delivers precise and flexible thermal regulation, ensuring unmatched adaptability across various conditions.
Inside our variable frequency refrigeration system, despite a consistent power supply frequency of 50HZ, the frequency converter intelligently adjusts the compression speed. It customizes cooling output based on real-time test chamber loads, dynamically modifying compressor frequency as chamber temperatures fluctuate, boosting energy efficiency and ensuring rapid cooling for outstanding performance.
Experience the flawless stability offered by our test chamber's variable frequency refrigeration system, which maintains a consistent temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, enhancing operational consistency for superior performance.
Take advantage of our energy-efficient refrigeration system technology, complemented by pioneering energy-saving innovations, designed to maximize performance while significantly reducing resource consumption.
1. Leverage the power of PID and PWM-driven VRF technology, utilizing electronic expansion valves for optimal thermal flow control. Achieve remarkable low-temperature energy efficiency with PID + PWM systems, enhancing refrigerant flow regulation and ensuring effective operation without the need for auxiliary heating.
With precise three-way flow adjustments across the refrigeration, cold, and heating side pipelines, automatic temperature constancy is achieved. This technique excels in maintaining peak performance even in low-temperature conditions, cutting energy consumption by 30% and optimizing overall efficiency.
Our technology, powered by the Danish Dan-foss Company's ETS System electronic expansion valve, offers dynamic refrigeration capacity adjustments. It adapts to varying cooling rates, fine-tuning compressor cooling capacity for superior efficiency.
2. Utilizing a dual compressor group design technology, automatic start-stop functionality is in sync with load conditions to maximize efficiency, made feasible through our advanced series design.
The refrigeration unit includes a binary compound of semi-closed compressors alongside a fully dense single-stage system. It intelligently adapts to load demands, ensuring optimal cooling capacity and prolonging compressor life.
Innovative Technological Advancements in Cold Circuit Technology
Power distribution layout is meticulously executed according to blueprints from our technical department, using globally recognized electrical component brands to ensure unmatched reliability and performance.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly incorporate time-honored brands such as Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is clearly marked for ease of use and reliability, as we select only the finest Chinese brands to guarantee top-tier performance and durability.
Choose Pearl River Cable, a symbol of excellence and reliability, for unmatched wire quality and performance. Our control lines feature 0.75 Square RV soft copper wire, ensuring superior conductivity. Essential components like motor compressors comply with rigorous EC standards, with trap diameters designed for cable groove wiring safety. The machine's cable port is expertly sealed to prevent frost-induced short circuits, safeguarding the terminal in the junction box from potential damage.
Each terminal fixing screw is meticulously connected using a standard fixed torque, providing secure and swift connections while preventing risks such as loose fires. This detailed craftsmanship greatly enhances safety and reliability.
Refrigeration Series Process: A Comprehensive and Integrated Approach
1. Standardization: Leading the Way to Superior Excellence
1.1 Our precise steel pipe piping process, combined with stringent welding standards, highlights our commitment to exceptional quality and unrivaled reliability.
By consistently following standardized pipe layouts, we ensure the steadfast stability and trustworthy reliability of our model systems.
1.2 Utilizing state-of-the-art Italian pipe bending technology, we achieve flawless steel pipe bends. This innovation significantly reduces the need for welding points and minimizes oxide formation during welding, enhancing system reliability.
Putting System Reliability at the Forefront
Pioneering Shockproof Design and Durable Pipeline Support
2.1 At MENTEK, we uphold strict standards for supporting and preventing shock in refrigeration copper pipes. By considering seismic scenarios, we implement arc bends and specialized nylon clamps to protect against deformation and leakage from vibration and temperature fluctuations, thereby boosting reliability.
Enhancing Reliability Across the Entire Refrigeration System
2.2 Advanced Oxidation-Free Welding Technique
The cleanliness of a refrigeration system's pipeline is critical to its efficiency and durability. MENTEK uses a standardized welding procedure to prevent excess oxide contamination, ensuring optimal performance.
MENTEK enhances refrigeration system efficiency and extends operational lifespan by reducing oxide pollution during welding, thereby maximizing both reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}