Advanced Electronics Testing Equipment for 3c Vibration Test System
Product Description
Introducing the unrivaled Guangdong Humid Testing Chamber, a pinnacle in environmental simulations, designed with unmatched versatility and precision. This cutting-edge chamber is meticulously crafted to conduct high and low-temperature tests across an extensive range of electrical components, products, parts, and materials. Whether your testing requirements include constant, gradient, rapid temperature fluctuations, or wet heat assessments, MENTEK's advanced chambers are engineered to not just meet, but to surpass the prestigious Chinese national standards T10586-2006 and T10592-2008, delivering unparalleled reliability and performance.
| M-series vibration testing system |
| Technical parameters of 1-ton vibration table body |
| Sinusoidal thrust |
1000kgf |
N×M Allowable partial load moment |
>390 |
| Random thrust |
1000kgf |
Equivalent mass of moving parts |
10kg |
| (6ms) Impact thrust |
2000kgf |
Load connection point |
17 |
| Frequency range |
DC-4,000Hz |
Countertop screw size (standard) |
M10 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*100mm; 8*200mm |
| Impact displacement |
51mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
300kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
240mm |
(L×W×H) Size (no packaging) |
1061*750*844mm |
| First order resonant frequency |
3600Hz |
Shaking table weight (no package) |
960kg |
|
| Technical parameters of power amplifier |
Technical parameters of fan |
| Maximum output power |
15KVA |
Fan power |
4kW |
| Signal to noise ratio |
>65dB |
Air volume |
0.38m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.048kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
125mm |
| System protection |
Featuring multiple performance protections |
(L×W×H) Size (no packaging) |
590*764*1280mm |
| (L×W×H) Size (no packaging) |
550*800*2070mm |
Weight (no packaging) |
150kg |
| Amplifier weight (without packaging) |
420kg |
|
|
| System working environment requirements |
Purchase configuration |
| Temperature |
0-40ºC |
Sliding table |
Vertical expansion of the table |
| Humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3 phase AC380V±10%, 50Hz, 26KVA |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
|
Note:
1. The external dimensions of the chamber are accurately determined by the heating and cooling rate.
2. It features a water cooling system, with water temperatures ranging from 10~28 ºC and water pressure between 0.1~0.3Mpa, ensuring optimal cooling efficiency.
3. The chamber can be enhanced with dampness and heat functionalities for additional versatility.
4. An optional dry air blowing system is available to accommodate customized requirements.
5. It includes an optional liquid nitrogen function capable of rapidly cooling at 30 ºC/min.
6. All listed loads are standard, but the chamber can be tailored to meet specific customer requirements.
The equipment meets the following testing standards
Our state-of-the-art testing equipment strictly complies with a comprehensive suite of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Additionally, it adheres to China National Standard/T2423.34-2012 Test Z/AnnoDominique, supporting a wide array of temperature and humidity scenarios, ensuring exceptional performance.
Structure of the testing chamber
The robust structure of the testing chamber features an outer shell crafted from premium galvanized color steel plate, offering exceptional durability and protection.
Internally, the chambers are lined with SUS304 stainless steel plates featuring adjustable hanging hole strips for flexible configurations. Each chamber includes a test track frame, insulated by a resilient 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are seamlessly connected using high-quality electric wood chicken glass fiber board frames, providing superior low-temperature insulation. The silicone foam door sealing strip, ingeniously designed with dual channels, demonstrates remarkable temperature resistance.
Experimental space air circulation:
Employing a sophisticated air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, driven by motors. These turbines expertly circulate air through upper louvers and return it from the bottom, maintaining a temperature uniformity of less than 2 ºC over a remarkable range of -70~100 ºC, evaluated at an international standard of 10 points.
Controller operating system
The system integrates a cutting-edge, low-power (8W) temperature and humidity control device, achieving exceptional precision with a temperature control accuracy of ±3 ºC.
1. High resolution screen:
Experience unparalleled detail on a 7-inch TET true-color LCD resistive touch screen, offering an impressive resolution of up to 800 * 480 for crystal-clear visibility.
2. High program capacity:
With an expansive memory, this system can store an impressive 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays for seamless queries and analysis.
3. High Data Storage Capacity:
Easily transfer a wealth of historical data for up to 300 days with ease. Simply upload directly via hard disk or network cable to your computer, or load it into the controller for seamless, ongoing access.
4. Seamless Connectivity:
Take control effortlessly with our cutting-edge controller, which features standard Ethernet LAN communication for streamlined management. Seamlessly coordinate up to 16 devices from a single software platform. The outflow interface ensures smooth integration into local networks, granting you the power of remote program management, real-time monitoring, and hassle-free access to historical data with utmost simplicity.
Heating and Moisture Control System
Elevate your heating efficiency with our innovative bare wire nickel-chromium alloy electric heating tubes, expertly engineered for low thermal inertia and precise temperature control. These tubes significantly minimize heating overshoot, offering exceptional precision in temperature management. Paired with state-of-the-art power controls, this system guarantees optimal heating performance tailored to meet your testing needs.
1. Advanced Humidification System:
Revolutionize your testing with our advanced humidification technology. Our sophisticated humidification cylinder, utilizing the proven boiler method, guarantees unparalleled moisture uniformity. For those demanding swift, accurate control, our water plate surface humidification delivers unmatched speed and precision while effortlessly eliminating impurities like scale. Particularly effective in low humidity dyeing applications, it offers effortless maintenance. Crafted from seamless stainless steel, our humidification tube boasts insulation resistance exceeding 50M Ω, along with a robust anti-dry burning controller for heightened safety.
2. Maximized Water Efficiency and Energy Conservation:
Discover our front-mounted 25L water tank, ingeniously designed with a quick-connect system for seamless water and power management. Enjoy easy disassembly and cleaning to maintain precision. Achieve meticulous dehumidification control across three distinct humidity zones, adhering to stringent national standards for high temperature and humidity conditions at 85 º C and 85% RH. Our cutting-edge sealed design, which disables point cooling and dehumidification systems, significantly reduces water usage, supporting sustainable operations.
Invest in equipment expertly engineered to withstand the most rigorous testing environments, delivering unmatched reliability and outstanding performance.
1. Choose the Circulating Air Mode: Select Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution offers precision and adaptability, ensuring peak performance.
2. Optimal Water Supply System: RO Reverse Osmosis
When precision in humidification is crucial, our equipment guarantees a steady supply of pure water via an automated production process, providing maximum convenience and efficiency.
3. Advanced Polymer Film/Rotor Dehumidification System
For rigorous long-term testing in low-temperature and low-humidity environments, our advanced cellular chemical dehumidification system is your ultimate solution. It accommodates a wide humidity range down to 10 º C/10% RH or lower, meeting the most demanding requirements.
4. LN.Two/ .LCO.2
We present top-tier professional products in an extensive range of specifications, sourced directly from renowned manufacturers across Europe and the United States. LN.Two/ .LCO.2
Leverage our solenoid valves and advanced control systems to meet your urgent testing needs with rapid thermal acceleration and precise temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic testing involving substantial heat loads in high temperature and humidity conditions, our groundbreaking ultrasonic cooling and humidification system is expertly crafted to overcome these challenges. Use it as an auxiliary component to achieve pinnacle performance.
6. Integrate a Glass Inner Door for Manual Operation Access
To mitigate environmental impact during routine testing or object movements, our design allows for manual operations through a large glass inner door (∧ 125Mm * Ea.). This groundbreaking feature notably diminishes disturbances from recurrent door openings, ensuring the sanctity of testing fidelity is uncompromised.
7. Real-Time Test Data Collection and Recording: Capture and record data instantaneously with our advanced systems, ensuring all test parameters and outcomes are meticulously documented for future analysis.
Our tape recorder stands as the ultimate beacon of precision and reliability in critical environments. Crafted for simultaneous recording of various temperature metrics, it not only complies with but exceeds the most rigorous standards, guaranteeing your operations are managed with unmatched expertise.
8. Advanced Computer Connection Operation Recording Software: Our sophisticated software solution streamlines operation recording, enhancing data integration and analysis with cutting-edge user interface features.
Specifically engineered for Mattel's environmental measuring machine collection, our cutting-edge connection software revolutionizes user interaction by providing superior functionalities. Benefit from seamless multi-machine oversight, effective data extraction from operational units, and top-tier electronic capabilities that render usability exceptionally intuitive.
Innovative Structural Technology: Embrace the future with our pioneering structural designs that offer superior stability and efficiency in testing environments.
1. Our Company's Premier Hardware Equipment: Discover our top-tier selection of German and Taiwan imported machinery, showcasing the esteemed AMADA AIRS.-255NT Punching system. With carbon oxide and argon welding machines, each model exemplifies precision and innovation, setting a new benchmark in modern manufacturing prowess.
Explore our sophisticated range of German and Taiwan imported machinery, featuring the notable AMADA AIRS.-255NT Punching system. Including carbon oxide and argon welding machines, each piece represents the pinnacle of precision and innovation. Utilize a variety of Autodesk Inventor 3D drawing software for sheet metal design, and virtual assembly, and disassembly, setting a new benchmark in manufacturing excellence.
2. The shell, forged from premium galvanized steel, stands out for its outstanding durability. Enhanced with a cutting-edge electrostatic powder spray baking paint finish, it ensures enduring protection and an elegant look.
Three.. Crafted with precision from imported SUS #304 stainless steel, the inner box is expertly constructed using a full argon arc welding method to effectively thwart high-temperature and high-humidity air leaks. Its rounded corners streamline condensate drainage, boosting overall efficiency.
Revolutionary Refrigeration System Technology: Experience the next generation of cooling with our innovative system that combines cutting-edge 3D-optimized management with state-of-the-art frequency conversion control technology for precise and flexible thermal regulation.
Our refrigeration system boasts advanced 3D-optimized management coupled with cutting-edge frequency conversion control technology, delivering precise and versatile thermal regulation for unparalleled flexibility and efficiency.
In our variable frequency refrigeration system, even at a constant power supply frequency of 50HZ, the frequency converter intelligently modifies the compression speed. It optimizes cooling output based on real-time test chamber demands and dynamically adjusts compressor frequency as chamber temperatures vary, boosting energy efficiency and ensuring swift, outstanding cooling performance.
Experience unmatched stability with our test chamber's variable frequency refrigeration system, providing a consistently controlled temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, maximizing operational consistency for exemplary performance.
Discover the perfect blend of energy-efficient refrigeration system technology and groundbreaking energy-saving innovations, engineered to enhance performance while reducing resource consumption.
1. Harness the power of PID and PWM-driven VRF technology, which includes electronic expansion valves for superior thermal flow control. Achieve low-temperature energy efficiency as PID + PWM systems fine-tune refrigerant flow regulation, guaranteeing efficient operations without supplementary heating.
Through precise three-way flow adjustment of refrigeration, cold, and heating pipelines, achieve automatic temperature uniformity. This method excels at maintaining peak performance in low-temperature conditions, reducing energy use by 30% and boosting overall efficiency.
Our technology, employing the Danish Dan-foss Company's ETS System electronic expansion valve, permits dynamic refrigeration capacity modifications. It adapts to various cooling rates, optimizing compressor cooling capacity for enhanced efficiency.
2. Implementing dual compressor group design technology, automatic start-stop functionality synchronizes with load conditions to optimize efficiency, enabled by our advanced sequential design.
The refrigeration unit includes a composite of semi-closed compressors and a fully dense single-stage system. It smartly adjusts based on load demands, ensuring optimal cooling capacity and extending the compressors' lifespan.
Innovative Cold Circuit Technology: Embrace our avant-garde cold circuit solutions that redefine efficiency and reliability in refrigeration technology.
The power distribution layout is meticulously executed following technical department designs, employing globally renowned electrical component brands for unmatched dependability and performance.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly showcase our innovative designs by integrating world-renowned brands like Omron, Sch-neider, and Germany Phoenix Terminal block. Each line code is clearly marked to ensure unparalleled ease of use and dependability. We meticulously select only the most reputable Chinese brands, guaranteeing exceptional performance and long-lasting durability for our esteemed clients.
Choose the highly-regarded Pearl River Cable as our esteemed brand, offering unrivaled wire quality and incomparable performance. Our control lines are crafted with a minimum of 0.75 Square RV soft copper wire, renowned for its superior and efficient conductivity. Key components, including motor compressors, are precisely engineered to meet the rigorous EC standards. To adhere strictly to cable groove wiring safety current standards, trap diameters are meticulously chosen. The machine's cable port boasts expert sealing, effectively preventing frost-induced short circuits and safeguarding the terminal within the junction box from any potential damage.
Every terminal fixing screw is expertly connected with precise fixed torque, ensuring secure and swift connections while minimizing risks such as loose fires. This meticulous attention to detail substantially elevates safety and enhances reliability across our systems.
Refrigeration Series Process: A Thorough and Meticulous Approach
1. Standardization: Forging the Path to Unmatched Excellence
1.1 Our exemplary steel pipe piping process, combined with stringent welding standards, underscores our unwavering dedication to excellence and unmatched reliability.
By steadfastly adhering to standard pipe layouts, we ensure consistent stability and reliable performance in our model systems.
1.2 Featuring cutting-edge Italian imported pipe bending machinery, we achieve immaculate steel pipe bends. This advanced technique significantly reduces the need for welding points and minimizes oxide formation within the tubes during welding, thereby enhancing overall system reliability.
Prioritizing System Reliability Above All Else
Innovative Shockproof Design and Robust Pipeline Support
2.1 At MENTEK, we uphold rigorous standards for supporting and preventing shocks in refrigeration copper pipes. By carefully analyzing potential seismic scenarios, we integrate arc bends and specialized nylon fixed clamping to prevent deformation and leakage due to circular vibration and temperature fluctuations, thereby reinforcing the overall reliability of the refrigeration system.
Enhancing Reliability Throughout the Entire Refrigeration System
2.2 Cutting-Edge Oxidation-Free Welding Process
It is universally recognized that a refrigeration system's pipeline cleanliness is vital to its efficiency and longevity. MENTEK employs a standardized charging welding procedure, ensuring negligible oxide contamination during the welding process, thereby optimizing performance.
Through meticulous practices, MENTEK elevates the refrigeration system's efficiency and prolongs its operational life by minimizing oxide pollution during welding, thus maximizing reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}