| Customization: | Available |
|---|---|
| After-sales Service: | Support Operation Guidance |
| Power Supply: | 220V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Relevant standard test requirements
Meet the standards: IEC.62133-2012,UL.1642. United Nations38.3 and 31241-2014 standards
Drop test: Put the battery according to 4.5.1. After the prescribed test method is fully charged, the free fall falls on the concrete according to the drop height in Table 8. On the board. For cylindrical type and button type. The two ends of the battery pack each fall once. The cylindrical surface fell twice. A total of four times. Drop test; the square battery pack falls once on each side. A total of six. Secondary test; carry out a drop test with equipment on non-user replacement batteries/battery packs. The equipment falls once on each side. After the test, charge and discharge according to the provisions of 4.5 method succession. Continue to carry out a discharge charging cycle.
Main features
Power: Drive the ball screw transmission through the motor
Control mode: PLC.Touch control, can touch manual input control height, the actual test results and the corresponding test data can be displayed during the test;
Drop height grading
| Contain Measure | Fall behind tall linear measure |
| 1000mAh Above | 1.0m |
| 1000mAh And above | 1.5m |
| Note: For portable electronic products with a height of more than 1.0m, such as handheld electronic devices, the power supply capacity exceeds 1,000mAh. The sample of its falling height should be 1.5m. | |
Main parameters
| Model | MBS-L1500 |
| Falling height | 300 to 1500mm (Adjustable) |
| Test method | The surface, edge and angle fall in all directions. |
| Test load | 0-5kg |
| The maximum size of the specimen (W*H*D) mm | 200*200*200 |
| Machine size W*H*D mm | 700*900*1800 |
| Motor power | 0.75kW |
| Display mode | Ruler + remote control |
| Partition material | SUS304# stainless steel |
| The way of falling | Pneumatic fall |
| The material of the falling floor board | Steel plate, cement, wooden board (optional) |
){kind=link}