| Customization: | Available |
|---|---|
| After-sales Service: | Support Operation Guidance |
| Power Supply: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Relevant standard test requirements
Safety test of monomer battery: The heating test is carried out according to the following steps
1.1 Monomer battery is charged according to the 6.1.3 method
1.2 Put the monomer battery into the temperature box, and for the temperature box of the ion battery, according to 5ºC/min. The rate of by. The room temperature rises to 130ºC±2ºC. And keep this temperature 30min. Then stop heating. For metal cyanide nickel battery temperature box according to 5ºC/min. The rate rises from room temperature to 85ºC±2ºC, and stop heating after maintaining this temperature for 2 hours and observe for 1 hour.
Battery module safety test: The heating test is carried out according to the following steps
1.1.1 Battery module battery is charged according to the 6.1.4 method
1.1.2 For the ion battery temperature box, according to 5ºC/minThe rate rises from room temperature to 130ºC±2ºC, and this temperature is maintained at 30min Empress. Stop heating.
For the temperature box of metal cyanide nickel battery, according to 5ºC/min. The rate rises from room temperature to 85ºC±2ºC, and stop heating after maintaining this temperature for 2 hours and observe for 1 hour.
Main parameters
| Model | MBS-HS1000 |
| The size of the water tank W*H*D mm | 1000*1000*1000 |
| Water tank material | PPR Plate welding |
| Equipment size W*H*D mm | 1700*1500*2500 |
| Discharge water | Automatic water discharge |
| Stirring system | Internal circulation of corrosion-resistant water pump |
| Product test method | Cylinder lifting |
| The total weight of the equipment | 800kg |
| Equipment power supply | AC380V 5.5kW |
){kind=link}