Advanced High Low Temperature Thermal Testing Chamber for Precision Humidity Climate Control
Product Description
Introducing the exceptional Advanced Humid Hot Testing Machine, a marvel of engineering by Guangdong MENTEK Testing Equipment Co., Ltd. This cutting-edge temperature humidity chamber is masterfully designed to perform with excellence in both high and low temperature testing, catering to a diverse array of electrical products, components, and materials. Immerse yourself in an unmatched world of environmental simulation and reliability testing, encompassing constant or gradient temperature shifts and rigorous wet heat assessments. Built to adhere to Chinese national standards/T10586-2006 and T10592-2008, our advanced humidity and heat test chambers guarantee precision, unparalleled quality, and supreme performance.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant standard test requirements
Safety Test of Monomer Battery:The temperature cycle test is meticulously conducted following these specific steps
1.1. The monomer battery is charged in strict accordance with the comprehensive guidelines outlined in the 6.1.3 method.
1.2 Within the temperature chamber, the monomer battery's temperature is precisely controlled. The chamber's settings are expertly adjusted as per Table 1 and Figure 2, ensuring a complete cycle performed 5 times, accompanied by a detailed observation period lasting 1 hour.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1: Temperature Cycle Test - The Temperature and Duration of a Cycle
Safety Test of Battery Module:The temperature cycle test is meticulously conducted following these precise steps
1.1.1. The battery module is charged following the meticulously crafted guidelines in the 6.1.4 method.
1.1.2 The battery module undergoes strategic temperature adjustments within the chamber, executed 5 times as specified in Table 1 and Figure 2.A thorough observation is conducted for a 1-hour period.
The equipment is designed to meet the following industry-leading testing standards
National Standard/T2423.1-2008 Test A: Low Temperature. National Standard/T4243.2-2008 Test B: High Temperature (Partial). National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat. Chinese National Standard/T2423.4-2008 Test: Decibel, Change, Damp Heat. China National Standard/T2423.34-2012 Test Z/AnnoDominique: Engage in comprehensive temperature and humidity combinations or other assessments, fully utilizing the equipment's performance spectrum.
Intricately designed structure of the testing chamber
Meticulously crafted with precision, the outer shell of the test box is constructed from durable galvanized color steel plate.
The inner boxes showcase superior craftsmanship with premium SUS304 stainless steel plates. Ingeniously integrated are adjustable hanging hole strips for uniform test track positioning. Encased in a minimum of 10 cm of rigid polyurethane foam and glass wool, these thermal insulation layers ensure optimal performance. The front doors are an engineering marvel, utilizing high-quality electric wood chicken glass fiber board frames for exceptional low-temperature insulation, complemented by silicone foam sealing strips that endure a wide temperature range.
Efficient Experimental Space Air Circulation:
A skillfully devised air supply system employs multi-blade aluminum wind turbines, resilient to both high and low temperatures. Powered by robust motors, air is effectively circulated to the upper louvers and returned from the bottom, guaranteeing a deviation of less than 2 ºC throughout the -70~100 ºC range, internationally benchmarked at 10 points.
Advanced Controller Operating System
Featuring an innovative low-power (8W) temperature and humidity control device, delivering outstanding precision in temperature regulation with an accuracy reaching an impressive ± 3 ºC.
1. High-Resolution Display Screen:
Behold the captivating 7-inch TET true color LCD resistive touch screen, a masterpiece of visual technology offering a stunning resolution of up to 800 * 480. It delivers unprecedented clarity and detail, transforming your viewing experience into a vivid spectacle.
2. Vast Program Capacity:
Discover extraordinary convenience and unmatched efficiency with our Premium Temperature Humidity Chamber, expertly crafted for advanced testing applications. Enjoy an impressive memory capacity designed to manage 1000 programs and 1000 segments, alongside 999 total loops and 999 partial loops, empowering you to effortlessly conquer even the most intricate testing scenarios. Seamlessly link up to 10 program sets, enriched with direct access to real-time temperature curve displays for immediate data queries, ensuring smooth operations at every stage.
3. Expansive Data Storage Capacity: Maximize your storage potential with our cutting-edge system.
Effortlessly manage and transfer historical data with our sophisticated system, boasting a storage operation capacity extending up to a remarkable 300 days. Seamlessly upload your invaluable data to a computer through a network cable or directly into the controller, ensuring seamless data management and accessibility at your fingertips.
4. Seamless Connectivity: Experience seamless integration and connectivity supremacy.
Leverage the power of LAN standard Ethernet communication to effortlessly connect the controller to your network. Manage up to 16 devices through a single software interface, seamlessly integrating into regional networks. Unlock the potential for remote program control with advanced features, including real-time monitoring and historical curve playback, ensuring comprehensive oversight and command at all times.
Sophisticated Heating and Humidification System: Elevate your testing protocols with precision-engineered excellence.
Our heating system, crafted with meticulous precision and expertise, incorporates nickel chromium alloy electric heating tubes engineered for low thermal inertia and minimal heating overshoot. Achieve high-precision fluctuations with finely regulated power, trusting our advanced system to deliver consistent and reliable results every time.
1. Cutting-edge Humidifier: Attain superior humidification consistency with our state-of-the-art system.
Experience unmatched uniformity in humidification with our cutting-edge system, featuring a state-of-the-art humidification cylinder (boiler method) for exceptional consistency. The surface humidification (water plate method) accelerates processes, enhancing control precision and eliminating impurities like scale. Our system excels even at low humidity, offering straightforward maintenance and cleaning. The premium humidification tube features a seamless stainless steel casing, insulation resistance exceeding 50M Ω, and an anti-dry burning controller for ultimate safety.
2. Maximizing Water Efficiency and Energy Conservation: Optimize performance while conserving resources.
Our innovative system features a spacious 25L front-mounted water tank with an intuitive quick-connection design for the efficient plug-in of water and electricity, facilitating easy disassembly and maintenance. Experience precise dehumidification across three distinct humidity zones, optimizing water usage while adhering to national standards for high-temperature and humidity conditions like 85ºC and 85% RH. With our point cooling and dehumidification system disabled, the innovative closed design significantly reduces water consumption, championing sustainability.
Choose equipment that excels in the most rigorous testing environments: Count on our advanced systems to meet and exceed your expectations.
1. Optimal Circulating Air Mode Selection: Choose the Courtyard Air Supply or Variable Speed Motor for your specific testing needs.
For products demanding precise wind speed control, our innovative solution offers unmatched precision and reliability, providing the ideal choice for your testing needs.
2. Optimal Water Supply System: RO Reverse Osmosis - Ensure purity and consistency in your processes.
Our automatic system revolutionizes humidification by providing a pure, consistent water supply through an RO reverse osmosis system. Enjoy unmatched convenience and save valuable time with our streamlined approach.
3. Advanced Polymer Film/Rotor Dehumidification System: Effortlessly achieve stringent low-temperature and low-humidity conditions with ease.
When your testing requirements necessitate precise low-temperature and low-humidity environments, our state-of-the-art cellular chemical dehumidification system stands out as the ideal solution. Immerse yourself in exceptional performance with a remarkable humidity range reaching as low as 10ºC/10% RH, guaranteeing precision and reliability in every result achieved.
4. LN.Two/ .LCO.2: Discover a comprehensive and versatile array of solutions perfectly tailored for diversified applications, ensuring that your every need is addressed with precision and expertise. LN.Two/ .LCO.2: Indulge in unparalleled excellence with our products, carefully sourced from the world's top manufacturers, setting the standard for quality and reliability.
We present a comprehensive selection of professional-grade products, meticulously sourced from leading manufacturers across Europe and the United States. Trust in our unwavering quality and expertise to fulfill your most demanding requirements with confidence. LN.Two/ .LCO.2: Expertly engineered for precise control and rapid testing, ensuring your tasks are accomplished with unmatched efficiency.
Our advanced solenoid valves and seamlessly integrated control systems are meticulously crafted to cater to your rapid testing needs. They offer accelerated testing and precise temperature reduction with unparalleled control, ensuring superior performance.
5. Ultrasonic Cooling and Humidification System: Conquer dynamic high heat load testing with assured confidence and superior performance.
Our ultrasonic cooling and humidification system is expertly crafted to tackle extreme temperature and humidity testing under dynamic high heat loads. As a highly efficient auxiliary device, it guarantees optimal performance and unwavering reliability in the most challenging conditions.
6. Premium Glass Inner Door with Manual Operation Port: Experience enhanced accessibility and visibility with sophistication and style.
Ensure seamless operations during frequent handling of test objects with our ingeniously designed premium glass inner door. Equipped with a manual operation port (∧ 125Mm * Ea.), it significantly minimizes environmental disruptions commonly faced with repetitive chamber access, ensuring continuous and consistent testing conditions are maintained.
7. State-of-the-Art Real-Time Test Data Recorder: Capture and analyze with precision and cutting-edge technology.
For those requiring meticulous temperature data of both the ambient testing environment and the test object, our certified recording solutions are indispensable. Our expertly engineered tape recorder meets every aspect of your data acquisition needs with unparalleled accuracy and reliability.
8. Cutting-Edge Computer Connectivity and Operation Recording Software: Revolutionize your data management experience.
Presenting our bespoke connection software, designed specifically for Mattel's environmental measuring machine kitchen. This groundbreaking tool redefines user convenience with its powerful capabilities, enabling simultaneous multi-machine monitoring, effortless data retrieval from live machines, and offering the most sophisticated electronic features available to users.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}