Three Comprehensive Test Chamber Vibration Temperature Humidity Mvth Series Tester Equipment

• Customization: Available
• After-sales Service: Support Operation Guidance
• Power Supply: 380V
• Model NO.: MVTH
• Certification: CE
• Warranty: 1 Year
• City: Dongguan, Guangdong
• Uses: Temperature Humidity Vibration Testing Machine
• Purpose: Environment Testing Chamber
• Volumn of Inner Box: 500-1000L
• Transport Package: Wooden Box
• Specification: 80*80*78cm
• Trademark: MENTEK
• Origin: China
• HS Code: 8479899990
• Production Capacity: 1000PCS/1year

Product Description

Three Comprehensive Test Chamber Vibration Temperature Humidity Mvth Series Tester Equipment

Product Description

1. Equipped with a lifting platform and an electric slide rail, The equipment can be moved up, down, left and right. To cooperate with the vibration table test;

2. Equipped with three movable bottom plates, Easy to replace, In order to meet the requirements of different test conditions; Three. The temperature rise and fall rate can be customized as required.

Model			MVTH-500		MVTH-1000		MVTH-500				MVTH-1000		MVTH-500		MVTH-1000
Volumn (L)			500		1000		500				1000		500		1000
Temperature range			-40+150/-70+150ºC
Humidity range			20%+98%RH
Temperature fluctuation			±0.5ºC
Temperature deviation			±2.0ºC
Humidity deviation			±3.0%RH(>75%RH)±5%RH(≥75%RH)
Temperature		range	-55ºC+85ºC
Speed		speed	5ºC/min					10ºC/min					15ºC/min
		load	500 model: 15kg aluminum ingot								100 model: 30kg aluminum ingot
Inner size (cm)		width	80		100			80			100		80		100
		height	80		100			80			100		80		100
		depth	78		100			78			100		78		100
Outer size (cm)		width	180		200			180			200		180		200
		height	190		210			190			210		190		210
		depth	135		155			135			155		135		155
Temperature and humidity regulation method			BTHC
Environmental temperature for use			+5ºC+35ºC
Material	Casing		High strength cold-rolled steel plate double-sided fine powder baking paint
	Inner wall		SUS # 304 Stainless Steel 2B Panel
	Thermal insulation material		Glass fiber+polyurethane foam
Modifier	Heater		Nickel chromium alloy electric wire heater
	Humidifier		Stainless steel armored heater
	Fan		centrifugal fan
	Compressor		Fully enclosed compressors imported from France or semi enclosed compressors imported from Germany
	Refrigerant		R404A/R23
	Cooling method		Mechanical compression cascade refrigeration (air-cooled/water-cooled)
	Controller		Original Japanese imported TFT touch screen
	Operation mode		Fixed value method, program method
	Program capacity		120 sets of programs*1000 segments (can be divided and looped 1000 times), the required number of segments for each set of programs can be arbitrarily divided, and each set of programs can be freely connected to each other (up to 200 connections)
	Setting Range		Temperature: Adjust according to the working range of the device's temperature (upper limit+5ºC, offline -5ºC) Humidity: 25% -100%RH (the device is designed for humidity)
	Input		Thermocouple
	Communication		(Optional) RS-485 interface, with local and remote communication functions (requires centralized monitoring software, RS-485/RS-232 converter, and occupies one COM port and one USB port of the PC); Up to 16 devices can be connected simultaneously, with a maximum cumulative cable length of 800mOC. Software usage environment: IBM PC compatible machine, CPU with P∥or above, 128MB or above memory, Simplified Chinese WINDOWSXP operating system
	Contro method		Anti integral saturation PID
	Data acquisition		1. Screen interface curve output - directly save the curve interface on the touch screen or any interface requested by the customer as a*BMP image and save it to a USB flash drive, or directly print the curve interface on the touch screen or any interface requested by the customer (requiring interface software modification) with a printer; 2. USB function - equipped with 1 IGU drive. Insert the USB flash drive into the USB interface of the controller during the experiment. The experimental data will be automatically recorded on a USB drive and saved as*CSV data files (not curve graphs), and the sampling period can be set on the screen. Open and process using software such as EXCEL; 3. Printer connection (optional): - Configure the printer to print the test date, set temperature, set humidity, and measured temperature by setting the printing frequency according to time. 4. Connected to PC (optional): - Through centralized monitoring software, test data can be recorded and automatically displayed as curves on the PC, which can be directly printed and recorded for unlimited time. The file size depends on the hard drive capacity. PC can also serve as a terminal for remote monitoring.
	Auxiliary functions		Fault alarm and cause, processing prompt function: power-off protection function: upper and lower limit protection function: timed function (automatic start and automatic stop operation)
	Water supply method		Pump lifting
	Water storage tank		25L
	water quality		Resistivity>500Ω
	Power		AC380(1±10%)V(50±500%)Hz Three-phase four-wire
	Maximum current		16	19		31			40	58		44		67		108
	Power(kW)		10	20		20			26	38		29		44		71
	Weight(kg)		485	795		585			720	895		640		770		950
	Standard configuration		1 electric heating film glass observation window, 2 cable holes (50), 2 sets of sample racks, 1 lighting lamp (fluorescent lamp), 4 casters, and 1 sample power control terminal
	Security Configuration		Leakage circuit breaker, fan overheating protection, compressor overpressure, overheating, phase sequence protection, overtemperature protection, temperature fuse, dry burn protection, etc

Note: Support customization

 Structural technology

Structural technology
1. The company's hardware equipment: Imported German laser machine Taiwan; question bookAMADA. AIRS.-255NT. Punching and Taiwan; Germany Each type is carbon oxide welding machine and argon welding machine.Ten.Multiple unitsAutodrsk. Invente 3D Drawing software, Proceed3D Shetate metal disassembly and design virtual assembly.
2. The shell is made of high-quality galvanized steel plate. Add electrostatic powderSpray baking paint at the end;
3. The inner box adopts importedSUS#304Stainless steel, argon arc welding full welding process, prevent the high temperature in the box high-humidity air leakage and penetration. The rounded corner design of the inner box. It can better discharge the condensate water of the side wall.

Refrigeration system technology
3D Refrigeration system management drawing   Frequency conversion control technology of refrigeration system. In the variable frequency refrigeration system. Even if the power supply frequency50HZ. It is fixed. It can be through the frequency converter. Change the frequency. So as to adjust the compression speed so that the amount of cold changes continuously. Ensure the operating load of the compressor. Match the actual load in the test chamber (that is, as the temperature in the test chamber rises, the compressor frequency rises, Increase the cooling capacity. On the contrary, the frequency of the compressor is reduced. Reduce refrigeration quantity. Greatly save transportation. Unnecessary loss when running, achieve the purpose of energy saving. It can still be used when the test chamber is just running. Improve the frequency of the compressor and the ability of the refrigeration system. Achieve rapid coolingThe purpose of. The test chamber adopts a variable frequency refrigeration system. It can accurately control the temperature in the box, so that the temperature in the box. Constant degree, the temperature fluctuates little. At the same time, it can also ensure the suction and exhaust pressure of the refrigeration system.

Refrigeration system technology and other energy-saving technologies
1. UsePID.+PWM. Principled VRF. Technology (electronic expansion valve according tothermal energy cold and beautiful flow control in working conditions)PID.++PWM.Principled VRF. Technology (system   Refrigerant flow control). The technology realizes low-temperature energy-saving operation (electronic expansion is based on what can be the cold and beautiful flow servo control technology in working conditions?) ; Low-temperature working state, put one thing on top of another. The heater does not participate in the work, pass PID.+PWM.Regulate the flow rate and flow of refrigerant to the three-way flow adjustment of refrigeration pipeline, cold side pipeline and heating side pipeline, realize the automatic constant temperature of the work. This method is under low-temperature working conditions. Approve Realize the automatic constantity of the studio temperature. This method is under low-temperature working conditions. It can reduce30% of energy consumption. This technology is based on Denmark Dan-foss. Company's ETS System electronic expansion Valve. It can be applied to the adjustment of refrigeration when different refrigeration capacity requirements, both when meeting the requirements of different cooling rates. Realize the cooling capacity adjustment of the compressor.
2. Size2Set compressor group design technology. Automatic start-stop according to load conditions (The big series is designed). Configuration of refrigeration unit1. The binary compound composed of a semi-closed compressor. Stacked refrigeration the system is added to a fully dense single-stage refrigeration system. Configure the female; according to the box. The load condition and cooling rate require the intelligent opening of different compressor units, so that the box. The internal cooling capacity working condition and the compressor output power are the best match. So that the reality. Now the compressor is round in the best working condition range to extend the service life.

Cut out Cold Circuit technology
The power distribution layout operation is based on the power distribution assembly drawing issued by the technical department to install electrical parts and select internationally well-known brands:
Omron, Sch-neider, Germany Phoenix Terminal block. The line code is clearly marked. Choose the old brand in China. Brand name, (Pearl River Cable) ensures the quality of the wire; Minimum selection of control lines 0.75 Square RV Soft copper wire. All major loads, such as motor compressors, are based on EC. The cable groove wiring safety current standard selects the trap diameter! PressShrink machine. The cable port of the machine cable box is treated with sealant. Prevent frost from short-circuiting the terminal in the junction box. All terminal fixing screws are connected with standard fixed torque. Make sure that it is fast and reliable. Prevent loose fire and other hidden dangers!

Refrigeration series process
1. Standardize
1.1 High-quality steel pipe piping process and welding standardization;
according to the standard pipe layout, ensure the stability and reliability of the model system;
1.2 Imported Italian imported pipe bending machine steel pipe whole bending. Significantly Reduce the welding point and the oxide in the tube generated during welding, and improve system reliability.

Shockproof and support of pipelines
2.1 MENTEK has strict requirements for the support and shock prevention of refrigeration copper pipes. Fully consider the management. In the road seismic protection situation, add arc bends to the refrigeration pipeline and adopt special nylon fixed clamping. The way, avoid pipe deformation and leakage caused by circular vibration and temperature changes. Improve the reliability of the whole refrigeration system.
2.2 Oxidation-free welding process. It is well known that the cleanliness inside the pipeline of the refrigeration system is directly related toRefrigeration system. The efficiency and operating life; MENTEK adopts standardized operation of charging welding. Avoid a large amount of oxide pollution in the pipe during welding.

 

Company Profile

Certifications

Ship to Client's Factory

 

 

Our Partners

Packaging & Shipping