Advanced Battery Testing Impact Table for Accurate Performance Measurement
Product Description
Discover the future of precision testing with our High Performance Temperature Humidity Chamber, a versatile marvel meticulously designed for high and low-temperature testing across a wide array of electrical products, components, and materials. Our environmental simulation reliability testing capabilities include constant gradient, sudden mutation, and wet heat testing. Proudly crafted by MENTEK, these chambers adhere strictly to Chinese national standards/T10586-2006 and T10592-2008, ensuring unparalleled accuracy and reliability.
Model |
MBS-IS200 |
Rated load |
10 Kilogram(Including fixtures and test products) |
Table size |
Length 200×Width 200 |
Impact waveform |
Semi-sine wave |
Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
Pulse duration (semi-sine wave) |
0.6-20ms |
External size |
W1000×L500×H2700mm |
Equipment weight |
1500 Kilogram |
Impact form |
Free fall |
Maximum drop height |
1500mm |
Power supply |
3-phase 380V, 50/60Hz |
Hydraulic source |
Random configuration |
Ambient temperature |
0~40ºC |
Environmental humidity |
Less than 85% |
Reliability |
The average fault-free cumulative working time is ≥1000h |
Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: The dimensions can be meticulously tailored to match your specific requirements.
Relevant standard test requirements
Meets standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014
Refer to section 4.5 for the sample According to the prescribed test method, the acceleration impact test shall be conducted after fully charged. The acceleration impact test shall be conducted in three mutually perpendicular directions in sequence. The test method is described in 7.4
After the experiment, continue one discharge and charging cycle according to the charging and discharging method specified in 4.5. The sample should not ig-nite, explode, or leak.
Our state-of-the-art equipment complies with the following rigorous testing standards:
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat China National Standard/T2423.34-2012 Test Z/AnnoDominique: Temperature and humidity combination or other temperature and humidity tests within the equipment performance range.
Structure of the Testing Chamber
The robust exterior of the testing chamber is crafted from galvanized color steel plates, ensuring durability and longevity.
The interiors boast SUS304 stainless steel construction, featuring side-mounted adjustable hanging hole strips with a versatile test track frame. A minimum of 10 cm thick rigid polyurethane foam and glass wool layers provide exceptional thermal insulation. The interface between the inner and outer doors utilizes premium electric wood chicken glass fiber board frames, delivering superior low-temperature insulation. The door's sealing strip, made from double-channel series silicone foam, offers unmatched wide temperature resistance.
Advanced Experimental Space Air Circulation:
Our mature air supply system employs multi-blade aluminum wind turbines, expertly engineered to withstand temperature extremes. Powered by motors, these turbines deliver air efficiently to the upper louvers, with return flow from the bottom, achieving unparalleled uniformity of less than 2 º C within the expansive range of -70~100 º C, a precision benchmark recognized internationally.
Controller Operating System
Incorporating a cutting-edge low-power (8W) temperature and humidity control device, we achieve temperature control precision up to ± 3 º C, ensuring consistent and reliable performance.
1. High Resolution Screen:
Experience crystal-clear visuals on a 7-inch TET true color LCD resistive touch screen, boasting an impressive resolution of 800 * 480.
2. High Program Capacity:
With an extensive memory capacity for 1000 programs/1000 segments, 999 total loops, and 999 partial loops, our system offers 10 sets of program linking functions, complete with real-time temperature curve displays for instant query access.
3. High Data Storage Capacity:
Seamlessly transfer 300 days' worth of historical data in storage operation mode by uploading directly to a hard disk or network cable, or integrating it into the controller for effortless data management.
4. Easy Connection:
Our controller features LAN standard Ethernet communication, allowing connection of up to 16 devices with a single software. Effortlessly connect to regional networks via the machine's outflow interface to enable remote program control, including real-time monitoring and historical curve playback.
Heating and Humidification System
Engineered with bare wire nickel chromium alloy electric heating tubes, our system ensures minimal thermal inertia, minimal heating overshoot, and high precision fluctuations-all powered to perfection.
1. Humidifier:
Experience unparalleled uniformity with our cutting-edge humidification system. Utilizing a humidification cylinder through the boiler method ensures consistent results. For those seeking speed, the surface humidification (water plate method) offers rapid operation with heightened control precision, eliminating impurities like scale within the chamber. With its dyeing capability, outstanding low humidity performance, and ease of maintenance, it's a breeze to keep pristine. The humidification tube features a seamless stainless steel shell, boasting an insulation resistance exceeding 50M Ω, and comes equipped with a sophisticated anti dry burning controller for enhanced safety.
2. Optimizing Water Usage and Energy Efficiency:
Our front-mounted, 25L high-capacity water tank features a quick connection design that simplifies water and electricity plugging, making disassembly and cleaning effortless. Achieve precision dehumidification across three distinct humidity zones, significantly reducing water usage while adhering to national standards for high temperature and humidity conditions such as 85 º C and 85% RH. With the point cooling and dehumidification system deactivated, the closed design substantially minimizes water consumption.
Invest in equipment specifically engineered to excel under the most extreme testing conditions.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When your product demands specific wind speed requirements, our tailored solution is your optimal choice.
2. Select the Right Water Supply System: RO Reverse Osmosis
For humidification needs, our equipment relies on pure water. This automatic water production system continuously supplies pure water, saving valuable time and providing utmost convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
If sustained low-temperature and low humidity testing is essential for your operations, our cellular chemical dehumidification system is your indispensable choice, achieving a humidity range of up to 10 º C/10% RH or even lower.
4. LN.Two/ .LCO.2
Explore our range of professional products, meticulously imported from Europe and the United States, with complete specifications. LN.Two/ .LCO.2
Our sophisticated solenoid valves and integrated control systems cater to your swift testing needs, allowing rapid acceleration and efficient temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system is engineered to meet these rigorous demands, functioning as a vital auxiliary system.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
To facilitate frequent movement and operation of the test subject, incorporating manual operation through the glass inner door (∧ 125Mm * Ea.) effectively mitigates the environmental impact from opening the chamber door.
7. Real-Time Data Acquisition Recorder
For simultaneous recording of multiple temperature measurements from both the testing environment and the test object, our recorders comply with industry standards. A tape recorder is your exclusive choice for meeting these specific needs.
8. Advanced Computer Connection Operation Recording Software
Designed to seamlessly integrate with Mattel's environmental measuring machine kitchen, our powerful connection software enables simultaneous multi-machine monitoring, data access from operating devices, and offers the most convenient and technologically advanced electronic functionalities for users.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping