Advanced 3c Electronics Vibration Testing System for Device Evaluation
Product Description
Unveil the unparalleled versatility and precision of the Guangdong Humid Testing Chamber, an epitome of innovation in environmental simulation technology. This state-of-the-art chamber is meticulously engineered to support an extensive array of high and low-temperature assessments for a myriad of electrical components, products, parts, and materials. Whether your experimental parameters demand constant, gradient, or swift temperature transitions, or involve rigorous wet heat evaluations, MENTEK's advanced chambers are built to not only meet but exceed the prestigious Chinese national standards T10586-2006 and T10592-2008. Embark on a journey with our reliability and performance that redefine industry standards.
| M-series vibration testing system |
| Technical parameters of 1-ton vibration table body |
| Sinusoidal thrust |
1000kgf |
N×M
Allowable partial load moment |
>390 |
| Random thrust |
1000kgf |
Equivalent mass of moving parts |
10kg |
(6ms)
Impact thrust |
2000kgf |
Load connection point |
17 |
| Frequency Range |
DC-4,000Hz |
Countertop screw size (standard) |
M10 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*100mm;8*200mm |
| Impact displacement |
51mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
300kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
240mm |
(L×W×H)
Size (no packaging) |
1061mm×750mm×844mm |
| First order resonant frequency |
3600Hz |
Shaking table weight (no package) |
960kg |
|
| Technical parameters of power amplifier |
Technical parameters of fan |
| Maximum output power |
15KVA |
Fan power |
4KW |
| Signal to noise ratio |
>65dB |
Air volume |
0.38m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.048kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
125mm |
| System protection |
Featuring multiple performance protections |
(L×W×H)
Size (no packaging) |
590mm×764mm×1280mm |
(L×W×H)
Size (no packaging) |
550mm×800mm×2070mm |
Weight (no packaging) |
150kg |
| Amplifier weight (without packaging) |
420kg |
|
|
| System working environment requirements |
Purchase configuration |
| temperature |
0-40ºC |
sliding table |
Vertical expansion of the table |
| humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3 phase AC,380V±10%,50Hz,26KAV |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
|
Note:
1. The chamber's specific external dimensions are precisely defined by the varied heating and cooling rates employed.
2. Featuring a cutting-edge water cooling system, this chamber guarantees optimum performance with a maintained water temperature range of 10~28 ºC and pressure levels set between 0.1~0.3Mpa.
3. For unrivaled adaptability, the chamber can be upgraded with enhanced dampness and heat features.
4. Customize your testing protocols with the optional dry air blowing system, crafted to meet specific requirements.
5. Experience rapid cooling with the optional liquid nitrogen function, reaching an impressive rate of 30 ºC/min.
6. While standard loads are available, the chamber can be tailor-designed to match unique customer demands.
The equipment meets the following testing standards
Our cutting-edge testing equipment adheres rigorously to an extensive range of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and National Standard/T2423.4-2008 for Change, Damp Heat. It is also compliant with China National Standard/T2423.34-2012 Test Z/AnnoDominique, providing unmatched support for an extensive variety of temperature and humidity conditions with its outstanding performance capabilities.
Structure of the testing chamber
The testing chamber features an exterior crafted from premium galvanized color steel plate, ensuring superior durability and protection.
Inside, the chamber is lined with SUS304 stainless steel plates, featuring adaptable hanging hole strips for flexible configurations. The test track frame is insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. High-quality electric wood chicken glass fiber board frames seamlessly integrate the inner and outer box doors, offering exceptional low-temperature insulation. The dual-channel silicone foam door sealing strip is noted for its excellent temperature resistance.
Experimental space air circulation:
Utilizing an advanced air supply system, the chamber boasts high and low-temperature resistant aluminum multi-blade wind turbines, powered by efficient motors. These turbines skillfully circulate air via upper louvers, returning it from the base, ensuring temperature uniformity within less than 2 ºC across a remarkable range of -70~100 ºC, evaluated at an international standard of 10 points.
Controller operating system
The system incorporates a pioneering low-power (8W) temperature and humidity control device, ensuring exceptional precision with a temperature control accuracy of ±3 ºC.
1. High resolution screen:
Dive into vivid detail with a 7-inch TET true-color LCD resistive touch screen, offering an exceptional resolution of up to 800 * 480 for crystal-clear visuals.
2. High program capacity:
With expansive memory capabilities, this system accommodates up to 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, enables 10 program linking features, and includes real-time temperature curve displays for seamless queries and analysis.
3. High data storage capacity:
Effortlessly transfer historical data spanning up to an impressive 300 days with unparalleled simplicity. Whether you choose to upload directly via a hard disk or network cable to your computer, or seamlessly load it into the controller, enjoy uninterrupted access and streamlined management.
4. Seamless Connectivity:
Maintain absolute control with our advanced, cutting-edge controller, boasting LAN standard Ethernet communication for a flawlessly streamlined operation. Effortlessly manage up to 16 devices from a single, sophisticated software platform. The outflow interface ensures seamless integration into local networks, empowering you with remote control capabilities, real-time monitoring, and effortless access to historical data-all with the utmost simplicity and sophistication.
Heating and Moisture Control System
Experience unmatched heating efficiency with our state-of-the-art bare wire nickel-chromium alloy electric heating tubes. Expertly designed for low thermal inertia, these tubes offer precise temperature control, minimizing heating overshoot and delivering exceptional precision in temperature management. Paired with cutting-edge power controls, this system guarantees superior heating performance tailored to your specific testing requirements.
1. Advanced Humidification System:
Transform your testing endeavors with our groundbreaking humidification technology. Our sophisticated humidification cylinder utilizes the time-tested boiler method to ensure unparalleled moisture uniformity. For rapid and precise control, our water plate surface humidification offers unmatched speed and accuracy, effortlessly eliminating impurities like scale, making it exceptionally effective in low humidity dyeing applications. The system promises seamless maintenance with its stainless steel construction, boasting an insulation resistance over 50M Ω and a robust anti-dry burning controller for enhanced safety.
2. Water Efficiency and Energy Conservation Maximized:
Explore our ingeniously designed front-mounted 25L capacity water tank, featuring a quick-connect system for seamless water and power management. Experience effortless disassembly and cleaning to maintain precision. Achieve meticulous dehumidification control across three distinct humidity zones, adhering to stringent national standards for high temperature and humidity conditions at 85°C and 85% RH. Our advanced sealed design, which disables point cooling and dehumidification systems, significantly reduces water usage, championing sustainable and eco-conscious operations.
Invest in equipment meticulously engineered to withstand the most demanding testing environments, guaranteeing unmatched reliability and extraordinary performance.
1. Choose the Circulating Air Mode: Select Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution guarantees both precision and adaptability, ensuring optimal performance tailored to your unique needs.
2. Optimal Water Supply System: RO Reverse Osmosis
When precision in humidification is imperative, our equipment guarantees a continuous supply of pure water through an automated production process, ensuring ultimate convenience and exceptional efficiency.
3. Advanced Polymer Film/Rotor Dehumidification System
For challenging long-term testing in low-temperature and low-humidity environments, our advanced cellular chemical dehumidification system is the ultimate answer. It accommodates a wide humidity range down to an impressive 10°C/10% RH or lower, meeting the most stringent requirements with ease.
4. LN.Two/ .LCO.2
We offer premier professional products with a vast array of specifications, directly sourced from renowned manufacturers across Europe and the United States, ensuring unparalleled quality and performance. LN.Two/ .LCO.2
Harness the power of our solenoid valves and advanced control systems to meet your critical testing demands with rapid thermal acceleration and precise temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic testing of substantial heat loads in high temperature and humidity settings, our revolutionary ultrasonic cooling and humidification system is expertly crafted to overcome these challenges. Employ it as an auxiliary component to achieve unmatched performance excellence.
6. Integrate a Glass Inner Door for Manual Operation Access
Step into the future with our state-of-the-art solution, expertly engineered to significantly reduce environmental interferences during frequent testing or object movement. The design features a cleverly integrated glass inner door (∧ 125Mm * Ea.), streamlining manual operations and greatly minimizing disruptions caused by frequent door openings. Elevate your testing accuracy and fidelity with unprecedented ease.
7. Flawless Real-Time Test Data Collection and Recording: Seamlessly capture essential insights with our sophisticated systems - designed to provide you with invaluable data at your fingertips effortlessly.
Say hello to our tape recorder, a paragon of precision and dependability in settings that demand the utmost accuracy. Artfully designed for the concurrent recording of various temperature metrics, it exceeds even the most stringent standards, ensuring your operations are carried out with unparalleled excellence.
8. Advanced Computer Connection Operation Recording Software: Transform your workflow with leading-edge technology that pushes the boundaries of innovation.
Exclusively designed for Mattel's environmental measuring machine suite, our unrivaled connection software revolutionizes user interaction by offering superior capabilities. Enjoy seamless multi-machine surveillance, simplified data extraction from operational units, and premium electronic features that make usability exceptionally intuitive and user-friendly.
State-of-the-Art Structural Technology
1. Discover Our Company's Flagship Hardware Equipment: Witness the apex of technological progress and innovation.
Explore our elite range of machinery imported from Germany and Taiwan, showcasing the esteemed AMADA AIRS.-255NT Punching system. With carbon oxide and argon welding machines, each model embodies precision and innovation. Master a suite of Autodesk Inventor 3D drawing software applications, setting new benchmarks in cutting-edge manufacturing excellence.
2. Crafted with premium galvanized steel, the shell is acclaimed for its exceptional durability. Enhanced by a sophisticated electrostatic powder spray baking paint finish, it provides lasting protection and a sleek, refined aesthetic.
Three.. Expertly engineered using imported SUS #304 stainless steel, the inner box employs a full argon arc welding technique to effectively prevent high-temperature and high-humidity air leakage. Its rounded corners exemplify efficient condensate drainage, significantly enhancing overall efficacy.
Revolutionary Refrigeration System Technology
Our refrigeration system features 3D-optimized management and cutting-edge frequency conversion control technology, delivering precise and versatile thermal regulation for unparalleled adaptability and precision.
Inside our variable frequency refrigeration system, the frequency converter ingeniously modulates compression speed, even under a steady 50HZ power supply frequency. It carefully adjusts cooling output in response to real-time test chamber loads, dynamically adapting compressor frequency with chamber temperature variations, enhancing energy efficiency and ensuring rapid, superior cooling.
Experience unparalleled stability with our test chamber's variable frequency refrigeration system, consistently maintaining a meticulously regulated temperature environment. This system ensures balanced suction and exhaust pressures, optimizing operational consistency for outstanding performance.
Explore the synergy of energy-efficient refrigeration system technology combined with groundbreaking energy-saving innovations, meticulously designed to amplify performance while minimizing resource consumption.
1. Leverage the power of PID and PWM-driven VRF technology, highlighted by electronic expansion valves for precise thermal flow control. Attain exceptional low-temperature energy efficiency as PID + PWM systems finely tune refrigerant flow regulation, ensuring optimal operations without auxiliary heating.
Achieve automatic temperature consistency through meticulous three-way flow adjustment of refrigeration, cold side, and heating side pipelines. This method excels in maintaining peak performance in low-temperature environments, reducing energy consumption by 30% while boosting overall efficiency.
Our cutting-edge technology, utilizing the Danish Dan-foss Company's ETS System electronic expansion valve, offers dynamic refrigeration capacity adjustments. It adeptly tailors to varying cooling rates, optimizing compressor cooling capacity for exceptional efficiency.
2. Utilizing a dual compressor group design technology, our automatic start-stop functionality seamlessly aligns with load conditions, optimizing efficiency through our advanced series design.
The refrigeration unit integrates a sophisticated binary compound of semi-closed compressors and a fully dense single-stage system. It intelligently adapts to load demands, ensuring optimal cooling capacity and extending the longevity of the compressor.
Innovative Cold Circuit Technology: Pioneering a new era of cooling brilliance, we deliver state-of-the-art solutions that redefine excellence.
Our power distribution layout is crafted with meticulous precision, following detailed technical blueprints. By employing globally acclaimed electrical components, we ensure unmatched reliability and performance.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate top-tier brands like Omron, Sch-neider, and Germany's Phoenix Terminal block into our designs. Each line code is clearly marked for ease of use and enhanced reliability. We carefully select reputable Chinese brands to provide superior performance and unparalleled durability.
Selecting the prestigious Pearl River Cable as our trusted partner guarantees extraordinary wire quality and performance. Our control lines meet a minimum standard of 0.75 Square RV soft copper wire, known for exceptional conductivity. Key load components, such as motor compressors, are crafted with precision to meet EC standards. We select trap diameters that comply with safety and current standards, while expertly sealing cable ports to prevent frost-induced short circuits, protecting the junction box from damage.
Every terminal fixing screw is securely connected using precise torque, ensuring quick and dependable connections. This meticulous approach minimizes risks like loose fires, significantly boosting safety and reliability.
Refrigeration Series Process: An In-Depth, Thorough Approach
1. Standardization: Pioneering the Path to Unrivaled Excellence
1.1 Our steel pipe piping process reflects our unwavering commitment to excellence, reinforced by rigorous welding standards for unmatched reliability.
By adhering to standardized pipe layouts, we ensure stability and consistent performance within our model systems.
1.2 With advanced Italian pipe bending machinery, we achieve perfect steel pipe bends. This technology reduces welding points, minimizing oxide generation and enhancing system reliability.
Prioritizing System Reliability Beyond All Else
Innovative Shockproof Design and Robust Pipeline Support
2.1 At Meitec, we enforce high standards for supporting and shock-proofing refrigeration copper pipes. We assess potential seismic scenarios to incorporate arc bends and specialized clamps, preventing deformation and leakage from vibration and temperature changes, thus improving system reliability.
Boosting Reliability Throughout the Entire Refrigeration System
2.2 Cutting-Edge Oxidation-Free Welding Process
The cleanliness of a refrigeration system pipeline is vital for efficiency and longevity. Metco uses a standardized welding process to prevent excess oxide contamination, ensuring peak performance.
Through rigorous practices, Metco enhances efficiency and extends operational lifespan by minimizing oxide pollution during welding, maximizing reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}