Advanced Environmental Analysis with Rapid Humidity Change Chamber System
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber, a marvel in environmental simulation crafted with versatility and precision in mind. This state-of-the-art chamber is engineered to perform high and low-temperature tests on a broad spectrum of electrical components, diverse products, parts, and materials. Whether your testing needs are for constant, gradient, rapid fluctuation temperatures, or wet heat assessments, MENTEK's advanced chambers are meticulously designed to meet and exceed Chinese national standards T10586-2006 and T10592-2008, ensuring unmatched reliability and performance.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are determined according to the heating and cooling rate.
2. Water cooling type (water temperature 10~28 ºC, water pressure 0.1~0.3Mpa to ensure cooling performance).
3. Can increase the function of dampness and heat.
4. Optional dry air blowing system.
5. Optional liquid nitrogen function (30 ºC/min).
6. The above loads are standard loads and can be designed according to customer requirements.
The equipment meets the following testing standards:
Our cutting-edge testing equipment strictly adheres to an array of rigorous standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Notably, it also complies with the China National Standard/T2423.34-2012 Test Z/AnnoDominique, thereby supporting a vast array of temperature and humidity scenarios within its comprehensive performance capabilities.
Structure of the testing chamber:
The formidable structure of the testing chamber features an outer shell fashioned from premium galvanized color steel plate, ensuring durability and superior protection.
Internally, the chambers boast SUS304 stainless steel plates with adaptable hanging hole strips for dynamic configurations. Each chamber is outfitted with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are securely linked using high-quality electric wood chicken glass fiber board frames, providing exceptional low-temperature insulation. The silicone foam door sealing strip, designed with dual channels, showcases remarkable temperature resistance.
Experimental space air circulation:
Harnessing a sophisticated air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, driven by motors. These turbines deftly circulate air through upper louvers and return it from the bottom, preserving a temperature uniformity of less than 2 ºC over an impressive range of -70~100 ºC, evaluated at an international standard of 10 points.
Controller operating system:
The system is integrated with a leading-edge, low-power (8W) temperature and humidity control device, achieving remarkable accuracy with a temperature control precision of ±3 ºC.
1. High resolution screen:
Immerse yourself in vivid detail with a 7-inch TET true-color LCD resistive touch screen, offering an impressive resolution of up to 800 * 480 for crystal-clear visibility.
2. High program capacity:
Boasting a vast memory, it can store an impressive 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays for effortless queries and analysis.
3. High data storage capacity:
Seamlessly transfer historical data spanning up to 300 days by uploading directly via hard disk or network cable to your computer, or effortlessly load it into the controller for continuous access.
4. Easy connection:
The controller boasts a standard LAN Ethernet communication interface, seamlessly managing connections with up to 16 devices through a comprehensive software platform. Its outflow interface ensures easy integration into local networks, empowering remote program control, real-time monitoring, and effortless historical curve replay capabilities.
Heating and Humidification System
Featuring bare wire nickel-chromium alloy electric heating tubes, this system offers low thermal inertia, minimal heating overshoot, and outstanding precision in fluctuation control. With sophisticated power management, it delivers optimized performance for all your needs.
1. Humidifier:
Elevate your environmental testing precision with our advanced humidification technology. Our state-of-the-art humidification cylinder, utilizing the reliable boiler method, ensures unmatched moisture level uniformity. For those seeking rapid and precise control, our surface humidification via the water plate method delivers extraordinary speed and precision, effectively eliminating impurities like scale within the chamber. Perfect for dyeing applications, it excels in low humidity conditions and assures effortless maintenance. With its seamless stainless steel shell, our humidification tube offers an insulation resistance exceeding 50M Ω, paired with a robust anti-dry burning controller to enhance safety.
2. Maximizing Water Efficiency and Energy Conservation:
Discover the convenience of our front-mounted 25L water tank, ingeniously designed with a quick-connect system for seamless water and power management. Enjoy easy disassembly and cleaning to maintain precision. Achieve precise dehumidification across three unique humidity zones, adhering to strict national standards for high temperature and humidity at 85 º C and 85% RH. By disabling the point cooling and dehumidification system, our advanced sealed design significantly reduces water consumption, promoting sustainable operations.
Protect your investment with equipment crafted to endure the harshest testing environments, ensuring unmatched reliability and premium performance.
1. Selecting the Circulating Air Mode: Choose Courtyard Air Supply or a Variable Speed Motor
For products with specific wind speed requirements, this customizable solution delivers exceptional precision and adaptability, guaranteeing optimal performance.
2. Selecting the Ideal Water Supply System: RO Reverse Osmosis
When meticulous humidification is crucial, our equipment provides an uninterrupted pure water supply through an automated production process, ensuring maximum convenience and time efficiency.
3. Cutting-Edge Polymer Film/Rotor Dehumidification System
For essential long-term testing under low-temperature and low-humidity conditions, our advanced cellular chemical dehumidification system is the ultimate solution. It supports a broad humidity range down to 10 º C/10% RH or lower, meeting the most demanding standards.
4. LN.Two/ .LCO.2
Our offerings include top-tier professional products spanning a wide array of specifications, directly sourced from leading manufacturers across Europe and the United States. LN.Two/ .LCO.2
Utilize our solenoid valves and cutting-edge control systems to meet your urgent testing requirements for rapid thermal acceleration and precise temperature reduction.
5. Revolutionary Ultrasonic Cooling and Humidification System
When conducting dynamic testing of large heat loads in high temperature and humidity environments, our pioneering ultrasonic cooling and humidification system is designed to tackle these challenging conditions. Integrate it as an auxiliary component to achieve peak performance.
6. Integrate a Glass Inner Door and Enable Manual Operation Access
To lessen environmental impact during frequent testing or object movement, incorporate manual operations through a glass inner door (∧ 125Mm * Ea.). This innovative design minimizes disruptions from frequent door openings, enhancing testing integrity.
7. Real-Time Test Data Collection Recorder
For scenarios demanding meticulous multi-temperature recordings, choose a recorder that adheres strictly to specification standards. A tape recorder emerges as the quintessential solution, offering unrivaled reliability to fulfill these precise demands.
8. Computer Connection Operation Recording Software: Unmatched Precision & Connectivity
Tailored for Mattel's environmental measurement suite, our cutting-edge connection software offers users state-of-the-art capabilities. It seamlessly monitors multiple machines, enables efficient data retrieval, and provides unmatched electronic functionalities, facilitating effortless usability and extraordinary convenience.
Structural Technology: A Testament to Innovation and Design Excellence
1. The Company's Hardware Equipment: A Showcase of Precision and Innovation
Introducing our refined collection of machinery imported from Germany and Taiwan, featuring the AMADA AIRS.-255NT Punching system. This range, encompassing everything from carbon oxide to argon welding machines, exemplifies precision and innovation. Discover the versatility of multiple Autodesk Inventor 3D drawing software applications, expertly utilized for sheet metal design, disassembly, and virtual assembly, setting a new standard in modern manufacturing excellence.
2. Constructed from superior galvanized steel, the shell's resilience is magnified with a cutting-edge electrostatic powder spray baking paint finish, guaranteeing enduring protection and aesthetic appeal.
Three. Crafted with imported SUS #304 stainless steel, the inner box is meticulously engineered using a comprehensive argon arc welding process to prevent high-temperature and high-humidity air leakage. Its rounded edges are designed for proficient condensate drainage, optimizing overall performance.
Revolutionary Refrigeration System Technology: Redefining Cooling Excellence
Experience the forefront of 3D-optimized refrigeration system management, leading with state-of-the-art frequency conversion control technology for precise and adaptable thermal regulation.
Within our variable frequency refrigeration system, a static power supply frequency of 50HZ is ingeniously managed by a frequency converter, which adjusts the compression speed. This adaptation aligns cooling output with real-time test chamber loads. As chamber temperatures shift, the compressor frequency dynamically modifies, heightening energy efficiency and accelerating cooling capabilities for unmatched performance.
Our test chamber's variable frequency refrigeration system ensures a consistently stable temperature environment, characterized by minimal fluctuations. This system guarantees balanced suction and exhaust pressures, optimizing operational consistency and reliability.
Energy-efficient refrigeration system technology and pioneering energy-saving innovations.
1. Experience the synergy of PID and PWM-driven VRF technology, leveraging electronic expansion valves for optimal thermal flow control, achieving unparalleled low-temperature energy efficiency. Through the integration of PID + PWM systems, refrigerant flow regulation is enhanced, facilitating effective operation without relying on auxiliary heating.
Through precise three-way flow adjustments of refrigeration, cold side, and heating side pipelines, automatic temperature constancy is achieved. This method excels in low-temperature scenarios, reducing energy consumption by 30% while optimizing performance.
Grounded in the innovative ETS System electronic expansion valve from the Danish Dan-foss Company, our technology dynamically adjusts refrigeration capacity, catering to diverse cooling rates and optimizing compressor cooling capacity.
2. Employing dual compressor group design technology, automatic start-stop mechanisms align with load conditions, optimizing efficiency with our advanced series design.
Our refrigeration unit configuration features a sophisticated binary compound of semi-closed compressors and a fully dense single-stage system, intelligently adapting based on load requirements to ensure optimal cooling capacity and enhance compressor longevity.
Innovative Cold Circuit Technology: Setting New Benchmarks in Cooling
Our power distribution layout is meticulously executed according to the technical department's blueprints, utilizing worldwide recognized electrical component brands for optimal reliability and performance.
At Guangdong MENTEK Testing Equipment Co., Ltd, we integrate esteemed brands such as Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is clearly marked for ease and reliability, ensuring top-notch performance. We selectively choose the most reputable brands in China to deliver superior durability and excellence.
With the renowned Pearl River Cable as our preferred brand, we assure you of unmatched wire quality and exceptional performance. Our control lines, crafted with a minimum choice of 0.75 Square RV soft copper wire, promise superior conductivity and durability. Key components such as motor compressors are engineered to meet rigorous EC standards, with precisely chosen trap diameters that comply with cable groove wiring safety current guidelines. The machine's cable port is thoughtfully sealed to thwart frost-induced short circuits, meticulously protecting the terminal in the junction box from any potential damage.
Every terminal fixing screw is fastidiously connected using a standard fixed torque, ensuring a swift and dependable connection while eradicating potential hazards like loose fires. This meticulous attention to detail significantly boosts safety and reliability, offering peace of mind.
Refrigeration Series Process: A Holistic and Comprehensive Approach
1. Standardization: Paving the Way to Unmatched Excellence
1.1 Our process of using premium steel pipe piping and strict welding standards is a testament to our unwavering commitment to excellence and reliability, setting a benchmark in the industry.
By strictly following standard pipe layouts, we ensure that our model systems are stable, reliable, and built to last.
1.2 Leveraging cutting-edge Italian imported pipe bending machinery, we achieve flawless bends in steel pipes. This innovative process significantly lessens welding points, curbing oxide formation within the pipes during welding and thereby enhancing the system's overall reliability and longevity.
Ensuring the Reliability of Our Systems is Our Paramount Priority
Shockproof Design with Unwavering Pipeline Support
2.1 At Meitec, we enforce rigorous standards for the support and shock prevention of refrigeration copper pipes. By extensively evaluating seismic protection scenarios, we employ arc bends and specialized nylon fixed clamping to avert deformation and leakage caused by circular vibration and temperature shifts, thus elevating the entire refrigeration system's reliability.
Elevating the Reliability of the Entire Refrigeration System
2.2 Advanced Welding Process with No Oxidation
It is widely recognized that the purity within a refrigeration system's pipeline is crucial to its efficiency and operational longevity. Metco adopts a standardized charging welding technique to avert excessive oxide build-up during welding, thereby ensuring optimum performance and extending the system's life.
Through diligent practices, Metco significantly boosts the refrigeration system's efficiency while extending its operational lifespan by minimizing oxide contamination during welding, ultimately maximizing reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}