Advanced Battery Impact Device Analysis Tool for High Accuracy Performance Testing
Product Description
Unlock the potential of next-generation precision testing with our High Performance Temperature Humidity Chamber. This versatile marvel is meticulously crafted for rigorous high and low-temperature assessments across diverse electrical products, components, and materials. With advanced environmental simulation reliability testing capabilities, including constant gradient, sudden mutation, and wet heat testing, your products will endure the most stringent conditions. Proudly emanating from the esteemed Guangdong MENTEK Testing Equipment Co., Ltd, these chambers strictly comply with Chinese national standards/T10586-2006 and T10592-2008, guaranteeing unmatched accuracy and reliability for your testing requirements.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: Customize dimensions with precision to meet your exact specifications and requirements.
Relevant standard test requirements
Adheres to rigorous standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014, for comprehensive compliance and assurance.
Refer to section 4.5 for the sample. Per the prescribed method, the acceleration impact test is conducted post full charge, sequentially in three mutually perpendicular directions, as detailed in section 7.4.
Upon completing the experiment, continue with one full discharge and charging cycle as specified in section 4.5, ensuring the sample remains non-ignitable, non-explosive, and leak-free.
Our cutting-edge equipment meets the following stringent testing standards, guaranteeing excellence in performance:
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat China National Standard/T2423.34-2012 Test Z/AnnoDominique: Temperature and humidity combination or other temperature and humidity tests within the equipment performance range.
Structure of the Testing Chamber
The testing chamber's sturdy exterior is constructed from galvanized color steel plates, ensuring robustness and longevity against demanding testing conditions.
Inside, the chamber features top-grade SUS304 stainless steel, equipped with side-mounted adjustable hanging hole strips and a versatile test track frame. A minimum of 10 cm thick layers of rigid polyurethane foam and glass wool provide extraordinary thermal insulation. The interface between the inner and outer doors is designed with premium electric wood chicken glass fiber board frames for superior low-temperature insulation. The door's sealing strip, crafted from double-channel series silicone foam, delivers exceptional wide temperature resistance, ensuring sealing efficacy and reliability.
Advanced Experimental Space Air Circulation:
Our state-of-the-art air supply system utilizes multi-blade aluminum wind turbines, engineered to endure extreme temperatures. Driven by powerful motors, these turbines efficiently channel air to the upper louvers with return flow from the bottom, achieving remarkable uniformity of less than 2 º C across an extensive range of -70~100 º C, establishing an internationally recognized precision benchmark.
Controller Operating System
Integrating a pioneering low-power (8W) temperature and humidity control device, we attain temperature control precision up to ± 3 º C, ensuring steadfast and dependable performance.
1. High Resolution Screen:
Enjoy unparalleled clarity with a 7-inch TET true color LCD resistive touch screen, featuring an outstanding resolution of 800 * 480, for sharp, vivid visuals.
2. High Program Capacity:
Our system boasts an expansive memory capacity accommodating 1000 programs/1000 segments, 999 total loops, and 999 partial loops. Enhanced with 10 sets of program linking functions, it offers real-time temperature curve displays for immediate query access and seamless operation.
3. High Data Storage Capacity:
Effortlessly manage an extensive 300-day archive of historical data with our intuitive storage operation mode. Choose to upload data seamlessly to a hard disk or via network cable, or merge it directly into the controller for streamlined data management and accessibility. Experience ultimate convenience in data handling like never before.
4. Easy Connection:
Our sophisticated controller is equipped with LAN standard Ethernet communication, seamlessly accommodating up to 16 devices through a single software interface. Effortlessly integrate into regional networks using the machine's outflow interface, allowing for comprehensive remote program control. Engage in real-time monitoring and effortlessly revisit historical data through intuitive curve playback.
Heating and Humidification System
Expertly crafted with precision, our system features bare wire nickel chromium alloy electric heating tubes, ensuring minimal thermal inertia and avoiding heating overshoot. With high precision fluctuations, it delivers performance powered to absolute perfection.
1. Humidifier:
Experience unrivaled uniformity with our advanced humidification system. Utilizing a humidification cylinder via the boiler method guarantees perfect consistency in results. For those prioritizing speed, the surface humidification (water plate method) offers rapid operation with superior control precision, efficiently eliminating impurities like scale within the chamber. Boasting dyeing capability, exceptional low humidity performance, and ease of maintenance, maintaining its pristine condition is effortless. The humidification tube is crafted from seamless stainless steel, with insulation resistance exceeding 50M Ω, and includes a state-of-the-art anti dry burning controller for enhanced safety.
2. Optimizing Water Usage and Energy Efficiency:
Our ingeniously engineered front-mounted, 25L high-capacity water tank with quick connection technology simplifies water and electricity plugging, making disassembly and cleaning a breeze. Achieve precision dehumidification across three distinct humidity zones, substantially reducing water consumption while adhering to national standards for high temperature and humidity conditions like 85 º C and 85% RH. By deactivating the point cooling and dehumidification system, its closed design dramatically minimizes water usage.
Invest in equipment meticulously engineered to excel under the most challenging testing conditions and ensure superior performance.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When your product demands specific wind speed parameters, our tailored solution is the perfect choice to meet those specific needs with precision.
2. Select the Right Water Supply System: RO Reverse Osmosis
For your humidification needs, our equipment relies on pure water. This automatic water production system guarantees a continuous supply of pure water, saving valuable time and offering unparalleled convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
For operations requiring sustained low-temperature and low humidity testing, our cutting-edge cellular chemical dehumidification system is indispensable, achieving a humidity range as low as 10 º C/10% RH or even lower.
4. LN.Two/ .LCO.2
Discover our range of professional products, meticulously sourced from Europe and the United States, offering comprehensive specifications. LN.Two/ .LCO.2
Our advanced solenoid valves and integrated control systems cater to rapid testing requirements, enabling swift acceleration and efficient temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Perfect for dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system is engineered to meet rigorous demands, functioning as a crucial auxiliary system.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Facilitate frequent movement and operation of the test subject through manual operation using the glass inner door (∧ 125Mm * Ea.), effectively mitigating environmental impact from opening the chamber door.
7. Real-Time Data Acquisition Recorder
For the precise and simultaneous recording of multiple temperature measurements from both the testing environment and the test object, our state-of-the-art recorders are meticulously crafted to meet stringent industry standards. Our tape recorder stands as the premier and exclusive choice, perfectly tailored to cater to these specific demands with unparalleled precision.
8. Advanced Computer Connection Operation Recording Software
Expertly designed to ensure effortless integration with Mattel's sophisticated environmental measuring machine kitchen, our advanced connection software empowers users with the capability for simultaneous multi-machine monitoring. It provides unfettered access to operating device data and offers the most cutting-edge, user-friendly electronic functionalities available today.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}