Thermal Shock Testing Equipment for Temperature Damp Heat Analysis Test Machine Tester
Product Description
Unveil the extraordinary capabilities of the Advanced Temperature Damp Heat Testing Chamber from Guangdong MENTEK Testing Equipment Co., Ltd. This state-of-the-art apparatus is expertly crafted to handle both high and low temperature testing across a diverse range of electrical products, parts, and materials. Revel in the ultimate experience of environmental simulation and reliability testing, offering both constant and gradient temperature variations coupled with thorough wet heat evaluations. Adhering to Chinese National Standards T10586-2006 and T10592-2008, our pioneering humidity and heat test chambers provide unmatched precision, quality, and reliability.
Model |
MHP-1000-CA |
Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
Effective volume |
About 1000L |
Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
Temperature uniformity |
±2ºC / ±3%RH. |
The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme: 1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
Compressor |
1. Fully enclosed compressor 2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
Condenser |
Air-cooled high-efficiency forced convection fin type |
Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition. Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant Standard Test Requirements
Monomer Battery Safety Test:The temperature cycle test is executed through the following steps:
1.1. The monomer battery is charged following the 6.1.3 method.
1.2 The monomer battery is expertly placed within the temperature chamber, finely tuned according to Table 1 and Figure 2. This meticulous process is repeated for 5 cycles, with keen observations conducted over a 1-hour duration.
Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
ºC |
Min |
Min |
ºC/Min |
25 |
0 |
0 |
0 |
-40 |
60 |
60 |
12/13 |
-40 |
90 |
150 |
0 |
25 |
60 |
210 |
12/13 |
85 |
90 |
300 |
Two/three |
85 |
110 |
410 |
0 |
25 |
.70 |
480 |
6/7. |
Table 1 Temperature Cycle Test: Detailed temperature and time specifications for a single cycle.
Battery Module Safety Test:The temperature cycle test is performed following these steps:
1.1.1. The battery module is charged in line with the 6.1.4 method.
1.1.2 The temperature of the battery module is meticulously set within the temperature chamber, precisely adjusted for 5 cycles as delineated in Table 1 and Figure 2.Continuous observation is meticulously conducted for 1 hour.
The equipment is in compliance with the following premier testing standards:
Our equipment strictly adheres to prestigious national standards: National Standard T2423.1-2008 Test A for Low Temperature, National Standard T4243.2-2008 Test B for High Temperature (Partial), National Standard T2433.3-2006 Test Cab for Constant Humidity and Heat, Chinese National Standard T2423.4-2008 Test Decibel for Change and Damp Heat, and China National Standard T2423.34-2012 Test Z/AnnoDominique. These rigorous standards ensure comprehensive assessments of temperature and humidity combinations or other parameters within the equipment's phenomenal performance spectrum.
Intricately Designed Structure of the Testing Chamber
Executed with exceptional precision, the outer hull of the test box is composed of durable galvanized color steel plate, offering unrivaled durability.
The inner boxes boast outstanding craftsmanship with SUS304 stainless steel plates, ingeniously outfitted with adjustable hanging hole strips for precise test track placement. Nestled in at least 10 cm of rigid polyurethane foam and glass wool, these insulation layers ensure optimal performance. The front doors, an engineering marvel, are framed with premium electric wood chicken glass fiber board, offering superb low-temperature insulation. This is further elevated by silicone foam sealing strips capable of enduring an extensive temperature range.
Efficient Experimental Space Air Circulation:
A meticulously designed air supply system utilizes multi-blade aluminum wind turbines resilient to extreme temperatures. Propelled by robust motors, air is expertly directed to the upper louvers and returns from the bottom, maintaining a deviation of less than 2 ºC across the -70~100 ºC spectrum, internationally benchmarked at 10 points.
Advanced Controller Operating System
Our system is integrated with a cutting-edge, low-power (8W) temperature and humidity control device, ensuring unparalleled precision in temperature regulation with accuracy reaching an impressive ± 3 ºC.
1. High-Resolution Display Screen:
A visually striking 7-inch TET true color LCD resistive touch screen, boasting an astounding resolution of up to 800 * 480, delivers an exceptional user interface experience.
2. Extensive Program Capacity:
With its exceptional program capacity, this advanced testing chamber boasts a stellar ability to store up to 1000 programs and 1000 segments. It adeptly manages 999 total loops and 999 partial loops, ensuring effortless functionality. Benefit from the seamless integration of 10 sets of program linking functions. Additionally, the real-time temperature curve display offers immediate access to direct queries, enhancing operational efficiency.
3. Expansive Data Storage Capacity: Unleash the power of robust data storage capabilities seamlessly integrated into this chamber.
Easily handle and transfer historical data from an impressive 300 days of storage operations. Optimize your data management by uploading via a network cable to your computer or directly into the sophisticated controller, providing streamlined efficiency.
4. Seamless Connectivity: Harness the power of unmatched connectivity solutions crafted for optimum efficiency and simplicity.
Utilize LAN standard Ethernet communication for an effortless controller connection experience. This resilient system supports up to 16 devices using a single software setup. Its outflow interface seamlessly integrates with regional networks, enabling remote program control. Features like real-time monitoring and historical curve playback revolutionize the user experience, elevating it to new heights.
Sophisticated Heating and Humidification System: Explore the intricate design of this cutting-edge system.
Crafted with meticulous precision, this system incorporates bare wire nickel chromium alloy electric heating tubes for optimal performance. Enjoy low thermal inertia and minimal heating overshoot, with high-precision fluctuations achieved through meticulously controlled power, designed for exemplary performance.
1. Cutting-edge Humidifier: Discover the pinnacle of humidification technology through our sophisticated humidification system.
Our advanced humidification system employs a cutting-edge humidification cylinder using the boiler method, ensuring exceptional uniformity. The surface humidification with the water plate method accelerates the process, enhancing precision control without leaving impurities like scale within the chamber. It offers remarkable performance even at low humidity, with easy maintenance and cleaning. The high-quality humidification tube features a seamless stainless steel casing, boasting insulation resistance exceeding 50M Ω, complete with a robust anti-dry burning controller for superior safety, offering peace of mind.
2. Maximizing Water Efficiency and Energy Conservation: Elevate sustainability and resource conservation to new heights.
Equipped with a spacious 25L front-mounted water tank featuring an intuitive quick-connection design, it enables rapid water and electricity plug-in, facilitating effortless disassembly and maintenance. Delivering precise dehumidification across three distinct humidity zones, the system optimizes water usage while adhering to strict national standards for high-temperature and humidity conditions such as 85ºC and 85% RH. The innovative closed design drastically reduces water consumption, embodying sustainability, especially when the point cooling and dehumidification system is disabled.
Opt for a testing solution that exceeds the most rigorous conditions, delivering unmatched performance.
1. Optimal Circulating Air Mode Selection: Choose between Courtyard Air Supply or Variable Speed Motor for unparalleled operational efficiency.
For products requiring precise wind speed control, this innovative solution presents the perfect choice, offering strategic adaptability and precision with ease.
2. Optimal Water Supply System: RO Reverse Osmosis - Elevate your system with unrivaled water purity and reliability.
Our automatic system simplifies the humidification process by delivering pure, consistent water supply through an RO reverse osmosis system. Save valuable time and ensure convenience with this efficient solution that promises unmatched purity and performance.
3. Advanced Polymer Film/Rotor Dehumidification System: Delve into advanced dehumidification solutions expertly designed for your requirements.
For testing scenarios requiring stringent low-temperature and low-humidity conditions, our state-of-the-art cellular chemical dehumidification system is the ideal choice. Delivering outstanding performance with a humidity range as low as 10ºC/10% RH or even lower, it effortlessly meets the most demanding specifications.
4. LN.Two/ .LCO.2 LN.Two/ .LCO.2
We proudly offer a diverse and extensive range of top-tier, professional-grade products, directly sourced from the most esteemed manufacturers across Europe and the United States. Entrust your needs to the quality and dependability of our remarkable offerings, thoughtfully crafted to fulfill every requirement you may have. LN.Two/ .LCO.2
Our advanced solenoid valves and integrated control systems are expertly engineered to meet the demands of rapid testing environments, providing swift testing and temperature mitigation with precise control. Rely on our solutions to consistently deliver the unparalleled excellence you demand.
5. Ultrasonic Cooling and Humidification System: Enhance testing capabilities under extreme conditions with our cutting-edge system, designed for optimal efficiency and performance.
Engineered for dynamic high heat load testing in extreme temperature and humidity scenarios, our ultrasonic cooling and humidification system is meticulously designed to satisfy the toughest standards. As a supplementary device, it ensures maximum performance and reliability, safeguarding your testing procedures under the most challenging conditions.
6. Premium Glass Inner Door with Manual Operation Port: Elevate your testing experience with this premium feature, designed for both convenience and safety.
To facilitate uninterrupted operations even when frequent relocations of test objects are required, our chamber boasts a premium glass inner door with a practical manual operation port (∧ 125Mm * Ea.). This innovative design reduces the environmental impact often associated with repeated chamber access, thereby maintaining the integrity of your testing conditions seamlessly.
7. State-of-the-Art Real-Time Test Data Recorder
In environments where accurate temperature readings of both the testing setting and the test object are paramount, our certified recording solutions are indispensable. The specialized tape recorder is precision-engineered to meet your comprehensive data acquisition needs with unrivaled precision, ensuring every detail is captured confidently.
8. Cutting-Edge Computer Connectivity and Operation Recording Software
Our exclusive connection software, custom-built for Mattel's environmental measuring machine kitchen, redefines standards for convenience and functionality. It enables simultaneous oversight of multiple machines, offers seamless data retrieval from active devices, and endows users with the most sophisticated electronic capabilities available today.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping