Advanced Battery Testing Chamber Impact Device for Precise Performance Measurement
Product Description
Step into the forefront of precision testing with our High Performance Temperature Humidity Chamber, a cutting-edge marvel designed for high and low-temperature testing across a vast spectrum of electrical products, components, and materials. Expertly engineered by MENTEK, these chambers deliver exceptional environmental simulation reliability testing, including constant gradients, sudden mutations, and wet heat testing. Crafted with meticulous attention to detail, they strictly adhere to Chinese national standards/T10586-2006 and T10592-2008, ensuring unparalleled accuracy, consistency, and reliability.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: The dimensions can be expertly customized to perfectly align with your specific requirements.
Relevant Standard Test Requirements
Our products meet the highest standards, including IEC62133-2012, UL1642, UN38.3, and 31241-2014.
Refer to section 4.5 for the sample procedure. According to the prescribed test method, an acceleration impact test shall be conducted post full charge, executed in three mutually perpendicular directions, sequentially. Detailed test methodology is elaborated in section 7.4.
Upon completion of the experiment, proceed with one discharge and charging cycle as specified in section 4.5. The sample must remain safe, showing no signs of ignition, explosion, or leakage.
Our state-of-the-art equipment is fully compliant with the following rigorous testing standards:
National Standard/T2423.1-2008: Low Temperature Test National Standard/T4243.2-2008: High Temperature Test (Partial) National Standard/T2433.3-2006: Constant Humidity and Heat Test Chinese National Standard/T2423.4-2008: Change, Damp Heat Test China National Standard/T2423.34-2012: Temperature and Humidity Combination Test or other specific tests within the equipment's performance range.
Structure of the Testing Chamber
The robust exterior of the testing chamber is engineered from galvanized color steel plates, ensuring remarkable durability and longevity.
Inside, the chambers feature SUS304 stainless steel construction with side-mounted adjustable hanging hole strips and a versatile test track frame. A minimum of 10 cm thick layers of rigid polyurethane foam and glass wool afford exceptional thermal insulation. The interface between the inner and outer doors is enhanced with premium electric wood chicken glass fiber board frames, offering superior low-temperature insulation. The door's sealing strip, crafted from double-channel series silicone foam, provides unmatched resistance to a wide temperature range.
Advanced Experimental Space Air Circulation:
Our refined air supply system features multi-blade aluminum wind turbines, meticulously engineered to withstand extreme temperatures. Powered by efficient motors, these turbines deliver air seamlessly to the upper louvers, with a return flow from the bottom, achieving a remarkable uniformity of less than 2 º C across the expansive range of -70~100 º C, setting a globally recognized precision benchmark.
Controller Operating System
Showcasing a state-of-the-art, low-power (8W) temperature and humidity control device, we guarantee temperature control precision up to ± 3 º C, ensuring consistent and reliable performance.
1. High Resolution Screen:
Indulge in crystal-clear visuals on a 7-inch TET true color LCD resistive touch screen, featuring an impressive resolution of 800 * 480, for an unparalleled viewing experience.
2. High Program Capacity:
With a formidable memory capacity for 1000 programs/1000 segments, 999 total loops, and 999 partial loops, our system offers 10 sets of program linking functions, complete with real-time temperature curve displays for instant query access, ensuring seamless operation and management.
3. High Data Storage Capacity:
Effortlessly transfer 300 days' worth of historical data in storage operation mode by uploading directly to a hard disk or network cable, or efficiently integrating it into the controller for streamlined data management.
4. Easy Connection:
Immerse yourself in the future of control with our state-of-the-art controller, boasting LAN standard Ethernet communication. Seamlessly connect and manage up to 16 devices with just a single piece of software. Embrace the freedom of connecting to regional networks through the machine's outflow interface, facilitating remote program control. Dive into a world of convenience with real-time monitoring capabilities and historical curve playback, ensuring you have the insights you need at your fingertips.
Heating and Humidification System
Crafted with precision, our heating system utilizes bare wire nickel chromium alloy electric heating tubes. Experience the perfect balance of minimal thermal inertia and negligible heating overshoot, all while achieving high precision fluctuations. It's engineered for perfection, ensuring consistent performance every time.
1. Humidifier:
Step into a realm of unmatched uniformity with our innovative humidification system. Utilizing a humidification cylinder through the advanced boiler method, it promises unwavering consistency. If speed is your priority, the surface humidification (water plate method) delivers rapid operation with exceptional control precision. It eradicates impurities like scale from within the chamber. With its dyeing capability, superior low humidity performance, and straightforward maintenance, keeping it pristine is effortless. The humidification tube is adorned with a seamless stainless steel shell, featuring insulation resistance surpassing 50M Ω, and is safeguarded by an advanced anti dry burning controller for elevated safety.
2. Optimizing Water Usage and Energy Efficiency:
Unveil innovation with our front-mounted, 25L high-capacity water tank. Its quick connection design elevates the simplicity of water and electricity plugging, making disassembly and cleaning a breeze. Master precision dehumidification across three distinctive humidity zones, drastically curtailing water usage while adhering to national standards for high temperature and humidity conditions such as 85 ºC and 85% RH. With the point cooling and dehumidification system switched off, the closed design substantially conserves water.
Invest in equipment ingeniously designed to thrive under the most severe testing conditions.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When your product mandates specific wind speed requirements, our custom-tailored solution is the epitome of optimization, ensuring your precise needs are met with excellence.
2. Select the Right Water Supply System: RO Reverse Osmosis
For your humidification requirements, our equipment leverages pure water, courtesy of an automatic water production system. This system ensures a continuous supply of pure water, saving your valuable time while providing unmatched convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
For operations where sustained low-temperature and low humidity testing is crucial, our cellular chemical dehumidification system stands as an indispensable solution. Achieve a remarkable humidity range of up to 10 ºC/10% RH or even lower, tailored to your specific testing needs.
4. LN.Two/ .LCO.2
Delve into our exquisite range of professional products, meticulously sourced from Europe and the United States, each embodying complete specifications and unparalleled quality. LN.Two/ .LCO.2
Our sophisticated solenoid valves, coupled with integrated control systems, are designed to accommodate your swift testing requirements. Experience rapid acceleration and efficient temperature reduction, all orchestrated with precision.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic high heat load testing in rigorous temperature and humidity environments, our ultrasonic cooling and humidification system is engineered to perfection. It stands as a crucial auxiliary system, adept at meeting your most demanding requirements.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Facilitate flawless operation of the test subject with our glass inner door, equipped for manual operation (∧ 125Mm * Ea.). This design effectively minimizes environmental impact from opening the chamber door, ensuring seamless function and efficiency.
7. Real-Time Data Acquisition Recorder
Capture the essence of precision with our real-time data acquisition recorders, designed to simultaneously record multiple temperature measurements from both the testing environment and the test object. These recorders adhere to industry standards, offering a tape recorder as your exclusive choice for fulfilling these specific requirements.
8. Advanced Computer Connection Operation Recording Software
eb410813
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}