Battery Pack Combustion Testing Machine for Lithium Power Fire Burning Test Device

Product Description

Battery Pack Combustion Testing Machine for Lithium Power Fire Burning Test Device

Product Description

Relevant Standard Testing Requirements
Meet the standards: IEC62133-2012, UL1642, UN38.3 and 31241-2014 standards.

Combustion and Ejection: After fully charging the battery according to the test method specified in 4.5.1, place the battery on the wire mesh of the test fixture. Refer to Appendix E.2 for the test fixture. If the battery is likely to slide during the test, a single piece of metal wire can be used to fix the battery sample on the wire mesh. If there is no such situation, the battery should not be tied up. Heat the battery with a flame and stop heating when one of the following three situations occurs:
a) The battery explodes.
b) The battery burns completely.
c) After continuous heating for 30 minutes, the battery does not catch fire or explode.

After the test, the components of the battery (excluding products in the form of dust) or the entire battery should not penetrate the aluminum mesh.

Main Features
This machine is suitable for the flammability resistance test of lithium batteries. Drill a round hole with a diameter of 102mm on an experimental platform, and place a wire mesh on the round hole. Put the battery under test on the wire mesh sieve. Install an octagonal aluminum wire mesh around the sample, and then ignite the burner to heat the test product until the battery explodes or burns out. Also, time the combustion process.

Main Parameters

Model	MBS-RS225
Burner	The inner diameter of the Bensheng lamp and pipe mouth is 0.375 inches (9.5mm) length about 10mm
Flame application time	0~999.9s ±0.1s
The time of flame burning	0~999.9s ±0.1s
Flame height	10~75±2mm
Diameter of the test stick	1/4 inch (6.35mm) *14 inches (305mm)
Test cover	Distance between each other: 24 inches (610mm) Height: 14 inches (305mm). Octagon angle iron: Upper and lower height 12.7*12.7mm
Flame height	The wire mesh is placed above the flame 38mm
Test the diameter of aluminum mesh	0.010 Inch(0.25mm) 16 eyes*16 eyes
Octagonal stainless steel mesh	The distance between each opposite side is 2 fee (610mm). Octagonal mesh height 1 Fee (305mm)
Test the surface diameter of the round hole	For 102mm
Ignition device	Automatic ignition
Display mode	PLC.Touch screen + remote control
Control method	Remote control, fully automatic control of the test process
Requirements for combustion gas	High-purity liquefied petroleum gas (self-care)
USB port	Belt universal serial busInterface, test data can be exported
Auxiliary functions	Explosion-proof pressure relief device, smoke exhaust device

Note: Tailor your testing experience with customizable sizing options that can be adapted to meet the unique requirements of any user.

Company Profile

Certifications

Ship to Client's Factory

 

 

Our Partners

Packaging & Shipping