Precision Battery Impact Tester for Accurate Performance Measurement and Analysis
Product Description
Unleash cutting-edge precision testing capabilities with our state-of-the-art High Performance Temperature Humidity Chamber. Expertly designed for thorough high and low-temperature evaluations, it excels across a wide array of electrical products, components, and materials. This chamber embodies advanced environmental simulation reliability testing features, including steady gradients, abrupt fluctuations, and humid heat assessments, ensuring your products can withstand even the harshest conditions. Originating from the renowned Guangdong MENTEK Testing Equipment Co., Ltd, these chambers adhere to the strictest Chinese national standards/T10586-2006 and T10592-2008, assuring unparalleled accuracy and dependability for all your testing needs.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: Customize dimensions precisely to fit your specific needs and criteria.
Relevant standard test requirements
Built to meet the strictest standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014, ensuring thorough compliance and reliability.
Consult section 4.5 for the sample details. Following the outlined method, the acceleration impact test is administered after a full charge in three perpendicular directions, as elaborated in section 7.4.
After completing the test, proceed with a full discharge and charge cycle as instructed in section 4.5, ensuring the sample remains non-combustible, non-explosive, and leak-proof.
Our cutting-edge apparatus complies with the following robust testing standards, ensuring unparalleled performance:
National Standard/T2423.1-2008 Test A: Low Temperature; National Standard/T4243.2-2008 Test B: High Temperature (Partial); National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat; Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat; China National Standard/T2423.34-2012 Test Z/AnnoDominique: Temperature and humidity combinations or alternative temperature and humidity tests within the equipment's performance spectrum.
Structure of the Testing Chamber
Crafted with a robust exterior of galvanized color steel plates, the testing chamber guarantees durability and resilience against the most demanding testing environments.
Inside, the chamber boasts premium SUS304 stainless steel, complete with side-mounted adjustable hanging hole strips and a flexible test track frame. With a minimum of 10 cm thick layers of rigid polyurethane foam and glass wool, it offers exceptional thermal insulation. The interface between inner and outer doors uses top-quality electric wood chicken glass fiber board frames, providing superior low-temperature insulation. The door's sealing strip, made from a double-channel series of silicone foam, ensures outstanding wide-temperature resistance, sealing efficacy, and reliability.
Advanced Experimental Space Air Circulation:
Our cutting-edge air supply system features multi-blade aluminum wind turbines, specially designed to endure extreme temperatures. Powered by robust motors, these turbines effectively direct air to upper louvers, with return flow from the bottom, achieving exemplary uniformity of less than 2 º C across an expansive range of -70~100 º C, setting a global standard in precision.
Controller Operating System
With a groundbreaking low-power (8W) temperature and humidity control device, we achieve temperature regulation precision of up to ± 3 º C, ensuring consistent and reliable performance.
1. High Resolution Screen:
Experience unmatched clarity with a 7-inch TET true-color LCD resistive touch screen, offering a remarkable resolution of 800 * 480 for sharp and vibrant visuals.
2. High Program Capacity:
Our system features expansive memory capabilities, supporting 1000 programs/1000 segments, 999 total loops, and 999 partial loops. Enhanced with 10 sets of program-linking functions, it provides real-time temperature curve displays for immediate inquiry access and seamless operation.
3. High Data Storage Capacity:
Seamlessly oversee up to 300 days of historical data through our user-friendly storage operation mode, designed for ultimate ease of access. Effortlessly upload data to a hard disk or via network cable, or merge into the controller to achieve an integrated, streamlined data management system.
4. Effortless Connectivity:
Experience state-of-the-art connectivity with our advanced controller, featuring LAN standard Ethernet communication. This innovation allows seamless integration of up to 16 devices using a single software suite. Connect effortlessly to regional networks via the machine's outflow interface for holistic remote program management. Benefit from real-time monitoring and effortlessly revisit historical data through intuitive curve playback functionality.
Heating and Humidification System
Our meticulously crafted system utilizes bare wire nickel chromium alloy electric heating tubes, ensuring minimal thermal inertia and reducing heating overshoot. This translates into high precision fluctuations and delivers unrivaled performance driven to perfection.
1. Humidifier Excellence:
Discover unparalleled uniformity with our cutting-edge humidification system. The boiler method guarantees supreme consistency, while the surface humidification (water plate method) offers rapid execution with exceptional control precision. This method eliminates impurities like scale within the chamber. The system is engineered with dyeing capability and outstanding low humidity performance, ensuring straightforward maintenance. Crafted from seamless stainless steel, the humidification tube boasts insulation resistance beyond 50M Ω and features an advanced anti dry burning controller for heightened safety.
2. Innovative Water and Energy Efficiency Solutions:
Our high-capacity, front-mounted 25L water tank, featuring quick connection technology, simplifies the process of water and electricity plugging and detachment. This design ensures effortless disassembly and cleaning. Achieve precision dehumidification across three distinct humidity zones, thereby curtailing water consumption, while adhering to national standards for high temperature and humidity conditions, such as 85 º C and 85% RH. Deactivating the point cooling and dehumidification system, the closed design further reduces water usage significantly.
Invest in equipment crafted with precision to thrive under the most demanding testing conditions.
1. Select the Optimal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind speed parameters, our tailored solution is the ultimate choice to meet these exacting standards.
2. Premium Water Supply System: RO Reverse Osmosis
Rely on pure water for humidification with our advanced equipment. The automatic water production system guarantees a constant supply of pure water, saving you valuable time and providing unparalleled convenience.
3. Superior Polymer Film/Rotor Dehumidification System
For operations demanding continuous low-temperature and low humidity testing, our sophisticated cellular chemical dehumidification system is essential, achieving humidity levels as low as 10 º C/10% RH or even less.
4. LN.Two/ .LCO.2
Explore our extensive range of professional products, meticulously sourced from Europe and the United States, with comprehensive specifications. LN.Two/ .LCO.2
Our advanced solenoid valves and integrated control systems are tailored to meet swift testing requirements, facilitating rapid acceleration and efficient temperature reduction.
5. Cutting-Edge Ultrasonic Cooling and Humidification System
Perfectly suited for dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system meets rigorous demands, serving as an indispensable auxiliary system.
6. Elevate Functionality with a Glass Inner Door and Manual Operation
Facilitate frequent movement and operation of the test subject with ease via the manual operation feature through the glass inner door (∧ 125Mm * Ea.), effectively minimizing the environmental impact from opening the chamber door.
7. Real-Time Data Acquisition Recorder
Our state-of-the-art recorders are exquisitely designed to ensure simultaneous logging of multiple temperature readings, capturing data from both the dynamic testing environment and the specific test object. Proudly adhering to rigorous industry standards, these tape recorders stand as the unparalleled choice for those requiring precision and excellence in temperature monitoring.
8. Advanced Computer Connection Operation Recording Software
Expertly crafted for effortless integration within Mattel's environmental measuring machine kitchen, our sophisticated connection software is engineered to facilitate seamless multi-machine supervision. It empowers users to access real-time operational device data, presenting the pinnacle of convenience and cutting-edge electronic capabilities.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}