Advanced Rapid Change Chamber Humidity Temperature Control Equipment for Precision Climate Testing
Product Description
Step into the realm of precision and innovation with the Guangdong Humid Testing Chamber, a pinnacle of environmental simulation technology engineered to perfection. This extraordinary chamber, built with versatility and meticulous precision, performs both high and low-temperature tests with astounding accuracy across a wide range of electrical components, diverse products, parts, and materials. With testing capabilities that include constant, gradient, and rapid fluctuation temperatures as well as wet heat assessments, the MENTEK chamber doesn't just meet the Chinese national standards T10586-2006 and T10592-2008-it surpasses them, setting an industry benchmark for reliability and exceptional performance in climate simulation technology, making it your ultimate partner for testing excellence.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are expertly tailored to align with specific heating and cooling rate requirements, ensuring optimal efficiency and adaptability.
2. Specifications for water-cooled types: water temperature range extends from 10~28 ºC, accompanied by a water pressure range of 0.1~0.3Mpa, providing unparalleled cooling performance and reliability.
3. Elevate your testing conditions with an enhanced functionality option featuring an additional dampness and heat feature, optimizing every test.
4. Experience adaptability with an optional dry air blowing system, crafted to meet your unique testing requirements with precision.
5. Enhance rapid cooling efficiency with an optional liquid nitrogen feature, capable of achieving a cooling rate of 30 ºC/min, ensuring swift and effective results.
6. Standard configurations provided can be custom-designed to align with specific customer requirements, offering bespoke solutions for every need.
The equipment meets the following testing standards
Our state-of-the-art testing equipment consistently adheres to a comprehensive suite of stringent standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Additionally, it aligns with the China National Standard/T2423.34-2012 Test Z/AnnoDominique. This rigorous compliance ensures our equipment excels across a multitude of temperature and humidity scenarios within its expansive performance capabilities, offering reliability and precision that are second to none.
Structure of the testing chamber
The robust structure of the testing chamber is crafted with an outer shell made from premium galvanized color steel plate, designed to provide exceptional durability and protection against environmental elements, ensuring longevity and steadfast performance.
Inside, the chambers are constructed with SUS304 stainless steel plates, featuring adaptable hanging hole strips for versatile configurations. Each chamber is thoughtfully designed with a test track frame, insulated with an impressive 10 cm layer of rigid polyurethane foam and glass wool. High-quality electric wood chicken glass fiber board frames securely link the inner and outer box doors, delivering exceptional low-temperature insulation. The silicone foam door sealing strip, ingeniously designed with dual channels, boasts remarkable temperature resistance, ensuring optimal performance and energy efficiency.
Experimental space air circulation:
Equipped with a cutting-edge air supply system, the chamber employs high and low-temperature resistant multi-blade aluminum wind turbines driven by motors. These advanced turbines skillfully circulate air through upper louvers, returning it from the bottom, maintaining temperature uniformity of less than 2 ºC across an impressive range of -70~100 ºC. This system is rigorously evaluated at an international standard of 10 points, ensuring consistency and precision in every test.
Controller operating system
Integrated with a state-of-the-art, low-power (8W) temperature and humidity control device, the system offers unprecedented accuracy, boasting a temperature control precision of ±3 ºC, setting a new precedent in control technology and ensuring superior performance.
1. High resolution screen:
Immerse yourself in the exquisite clarity of our magnificent 7-inch TET true-color LCD resistive touch screen. With an awe-inspiring resolution reaching up to 800 * 480, enjoy unparalleled visibility and sharpness that guarantees effortless navigation and seamless operation.
2. High Program Capacity:
Transform your testing prowess with our exceptional memory capacity, offering storage for a staggering 1000 programs, each comprising 1000 segments. Revel in the ability to utilize 999 total loops and 999 partial loops, alongside 10 program linking options. Witness instantaneous real-time temperature curve displays that simplify inquiries and deepen your analytical insights.
3. High Data Storage Capacity:
Seamlessly transfer expansive historical data for up to 300 days, via direct upload using a hard disk or network cable to your computer, or by loading into the controller for continuous access. This streamlined process is crafted to enhance convenience and maximize operational efficiency.
4. Seamless Connectivity:
Experience extraordinary control with our cutting-edge controller, featuring LAN standard Ethernet communication. Effortlessly manage up to 16 devices using one software platform. The outflow interface ensures seamless network integration, enabling remote program management, real-time monitoring, and rapid access to historical data. Discover the ultimate in convenience for control and data management.
Heating and Moisture Control System
Unveil the future of heating precision with our pioneering bare wire nickel-chromium alloy electric heating tubes. Engineered for low thermal inertia and minimal overshoot, they ensure unrivaled accuracy in temperature control. Coupled with advanced power management, this system guarantees optimal performance for all your testing needs.
1. Advanced Humidification System:
Enhance your testing endeavors with our revolutionary humidification technology. Featuring a state-of-the-art humidification cylinder employing the reliable boiler method, it guarantees excellent moisture uniformity. For rapid and precise control, our water plate surface humidification offers unmatched speed and accuracy, effectively removing impurities such as scale. Ideal for low humidity dyeing conditions with effortless maintenance. Our humidification tube, crafted from seamless stainless steel, features insulation resistance exceeding 50M Ω and includes a robust anti-dry burning controller for elevated safety.
2. Water Efficiency and Energy Conservation Maximized:
Discover the convenience of our front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for efficient water and power management. It allows effortless disassembly and cleaning to maintain precision. Achieve meticulous dehumidification across three distinct humidity zones, meeting stringent national standards for high temperature and humidity at 85 º C and 85% RH. Our advanced sealed design, which deactivates point cooling and dehumidification systems, significantly reduces water consumption, heralding a new era of sustainable operation.
Select our equipment, meticulously engineered for the most demanding testing environments, delivering unmatched reliability and exceptional performance.
1. Choose the Circulating Air Mode: Select Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution ensures precision and adaptability, guaranteeing optimal performance every time.
2. Optimal Water Supply System: RO Reverse Osmosis
When precision in humidification is paramount, our equipment delivers a consistent supply of pure water through an automated production process, enhancing convenience and saving valuable time.
3. Advanced Polymer Film/Rotor Dehumidification System
For rigorous long-term testing in low-temperature and low-humidity environments, our advanced cellular chemical dehumidification system is the definitive solution. It manages a broad humidity range, achieving levels as low as 10 º C/10% RH or lower, adhering to the most stringent standards.
4. LN.Two/ .LCO.2
We provide top-tier professional products featuring a comprehensive array of specifications, sourced directly from esteemed manufacturers across Europe and the United States. LN.Two/ .LCO.2
Harness the power of our cutting-edge solenoid valves and state-of-the-art control systems to address time-sensitive testing demands. Achieve rapid thermal acceleration combined with accurate temperature reduction, ensuring no compromise on quality and precision.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Experience the epitome of innovation with our ultrasonic cooling and humidification system, expertly crafted to triumph over the challenges posed by significant heat loads and elevated temperatures. Perfectly suited for dynamic testing, this system serves as a powerful complement, delivering unparalleled performance in your testing protocols.
6. Integrate a Glass Inner Door for Manual Operation Access
Enhance your testing scenarios and object movement with our environmentally conscious, manual-access glass inner door. Strategically engineered (∧ 125Mm * Ea.) to minimize disturbances from frequent openings, this avant-garde design upholds the integrity of your testing processes.
7. Real-Time Test Data Collection and Recording
In settings where precision is paramount, our tape recorder emerges as the benchmark for excellence. Capable of capturing multi-temperature data simultaneously, it not only meets but surpasses the highest industry standards, ensuring your operations are under the watchful eye of leading experts.
8. Advanced Computer Connection Operation Recording Software
Immerse yourself in the groundbreaking features of our connection software, custom-designed for Mattel's environmental measuring machines. It offers users superior operational capabilities, seamless oversight across devices, efficient data retrieval, and advanced electronic functionalities, redefining user interaction.
Innovative Structural Technology
1. Our Company's Premier Hardware Equipment:
Explore our premium range of German and Taiwan-imported machinery, featuring the unmatched AMADA AIRS.-255NT Punching system. From sophisticated carbon oxide to argon welding tools, each piece exemplifies precision and cutting-edge innovation. Master state-of-the-art Autodesk Inventor 3D software for revolutionary sheet metal design, virtual assembly, and disassembly, setting new heights in modern manufacturing excellence.
2. Crafted with top-tier galvanized steel, the outer shell ensures exceptional durability and is sealed with an advanced electrostatic powder spray baking paint finish. This innovative combination offers lasting protection with a refined and elegant aesthetic.
Three.. Expertly crafted from imported SUS #304 stainless steel, the internal box employs comprehensive argon arc welding to prevent air leakage in high-temperature and high-humidity environments. Rounded corners ensure efficient drainage of condensate, boosting operational efficiency.
Revolutionary Refrigeration System Technology
Our 3D-optimized refrigeration system utilizes cutting-edge frequency conversion control technology, delivering precise and adaptable thermal regulation for unmatched flexibility and superior performance.
Within our variable frequency refrigeration system, the frequency converter intelligently adjusts compression speed, tailoring cooling output to real-time chamber loads. The system dynamically modulates compressor frequency with chamber temperature changes, optimizing energy efficiency and ensuring rapid cooling for unparalleled performance.
Witness the seamless consistency of our variable frequency refrigeration system within the test chamber, maintaining a stable temperature environment with minimal fluctuations. It ensures balanced suction and exhaust pressures, optimizing operational reliability and delivering top-tier performance.
Unlock the potential of our energy-efficient refrigeration system technology, integrated with pioneering energy-saving innovations to boost performance while minimizing resource consumption.
1. Utilize the sophisticated PID and PWM-driven VRF technology, featuring electronic expansion valves for precise thermal control. PID + PWM systems enhance refrigerant regulation for optimal low-temperature energy efficiency, enabling effective operation without auxiliary heating.
Achieve automatic temperature stability with precise three-way flow regulation of refrigeration, cold side, and heating side pipelines. This method excels under low-temperature conditions, reducing energy use by 30% and significantly boosting overall efficiency.
Our cutting-edge system harnesses the power of the Danish Dan-foss Company's ETS System electronic expansion valve, offering dynamic and precise adjustments in refrigeration capacity. This innovative technology seamlessly adapts to diverse cooling rates, optimizing compressor cooling capacity to deliver heightened efficiency and performance.
2. Our state-of-the-art design features a dual compressor group, employing intelligent automatic start-stop functionality that aligns seamlessly with load conditions to maximize efficiency. This advanced series design ensures that our technology operates at peak performance, delivering energy-efficient solutions for all your needs.
The refrigeration unit integrates a sophisticated binary compound of semi-closed compressors paired with a fully dense single-stage system. It intuitively adjusts to varying load demands, ensuring optimal cooling capacity while significantly prolonging compressor lifespan for unmatched reliability.
Innovative Cold Circuit Technology
Our power distribution layout is meticulously crafted in strict accordance with the technical department's blueprints. By harnessing globally esteemed electrical components from revered brands, this meticulous selection ensures unparalleled reliability, placing our systems at the zenith of electrical excellence.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate legendary brands like Omron, Sch-neider, and Germany Phoenix Terminal block within our innovative designs. With each line code meticulously marked, we ensure both ease of use and steadfast reliability. Our discerning selection of only the most esteemed Chinese brands promises exceptional performance and lasting durability.
Choose the renowned Pearl River Cable, synonymous with unsurpassed wire quality and stellar performance. Our control lines feature a minimum specification of 0.75 Square RV soft copper wire, guaranteeing optimal conductivity. Key load components, including motor compressors, are engineered to meet stringent EC standards, with precisely chosen trap diameters adhering to cable groove wiring safety standards. Expertly sealed cable ports avert frost-induced short circuits, safeguarding junction box terminals from potential harm.
Every terminal fixing screw is secured with meticulous precision, using a standard fixed torque to ensure both rapid and secure connections. This careful attention to detail greatly enhances the safety and reliability of our systems, effectively mitigating risks such as loose connections and potential fires.
Refrigeration Series Process: A Holistic and Comprehensive Methodology
1. Standardization: Paving the Pathway to Unmatched Excellence
1.1 Our outstanding steel pipe piping process, coupled with rigorous welding standards, highlights our unwavering commitment to excellence and unparalleled reliability.
By strictly adhering to standard pipe layouts, we ensure steadfast stability and dependable reliability across all our model systems, guaranteeing exceptional performance at every step.
1.2 Utilizing advanced Italian imported pipe bending machinery, we craft seamless steel pipe bends. This cutting-edge process significantly reduces welding points and minimizes oxide formation during welding, thereby greatly enhancing overall system reliability.
Emphasizing System Reliability as Our Supreme Objective
Innovative Shockproof Design and Robust Pipeline Support
2.1 At Meitec, we uphold stringent standards for supporting and shockproofing refrigeration copper pipes. By thoroughly evaluating potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping. This approach safeguards against deformation and leakage caused by circular vibration and temperature fluctuations, thus significantly enhancing the overall reliability of the refrigeration system.
Revolutionizing Reliability Throughout the Entire Refrigeration System
2.2 Cutting-Edge Oxidation-Free Welding Techniques
Understanding that pipeline cleanliness is vital for the efficiency and longevity of a refrigeration system, Metco implements a standardized charging welding procedure to prevent excessive oxide contamination. This meticulous approach ensures peak performance every single time.
Through diligent practices, Metco significantly enhances the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide contamination during welding, thereby maximizing reliability and performance at every stage.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}