Battery Temperature and Humidity Cycling Test Chamber for Precision Testing Power Circulation

• Customization: Available
• After-sales Service: Support Operation Guidance
• Power Supply: 380V
• Model NO.: MHP
• Certification: CE
• Warranty: 1 Year
• City: Dongguan, Guangdong
• Uses: Temperature and Humidity Cycling Test Chamber
• Purpose: Temperature Humidity Cycling Testing
• Volumn of Inner Box: 150-1000L
• Transport Package: Wooden Box
• Specification: 50*60*50cm
• Trademark: MENTEK
• Origin: China
• HS Code: 8514199000
• Production Capacity: 1000PCS/1year

Product Description

Battery Temperature and Humidity Cycling Test Chamber for Precision Testing Power Circulation

Product Description

Relevant standard test requirements
Meet the standards: IEC.62133-2012,UL.1642, United Nations38.3 And 31241-2014 standard
Temperature cycle test chamber: Put the battery according to 4.5.1 After the specified test method is fully charged, place the battery in the test chamber and follow the following steps to test (see Figure 1)):
A) Maintain 6h at a temperature of 75ºC±2ºC;
B) Maintain 6h at a temperature of -40ºC±2ºC;
C) Repeat step a)~b), a total of 10 cycles;
D) Restore the ambient temperature of 20ºC±5ºC.
During the test, the conversion time between each of the two temperatures is not more than 30min.

Main parameters

Model		MHP-150								MHP-225							MHP-408							MHP-800								MHP-1000
Inner box size W*H*D(cm)		50*60*50								60*75*50							80*85*60							100*100*80								100*100*100
Outer box size W*H*D(cm)		70*150*165								80*165*170							100*175*180							120*190*185								120*190*190
The volume of the inner box		150L								225L							408L							800L								1000L
Performance	Temperature and humidity range	0ºC/20°ºC/-40°C/-60C/-70ºC/+100ºC(+150ºC): 10%RH-98%
	Volatility of temperature and humidity	±0.3ºC-±0.5ºC; ±2.5%RH
	Temperature and humidity deviation	±2ºC; Soil 3RH(>75%RH); Soil 5%RH ≤75 % RH)
	Controller analysis accuracy	±0.01ºC; ±0.1%RH
	Warm-up time	100			150						100			150				100			150					100			150				100					150
	(RT-HT)	30			40						40			50				45			55					55			60				50					60
Cooling time		0	-20	-40		-60	-70		0			-20	-40		-60	-10			0	-20		-40	-60		-70		0	-20		40	-60			-70		0	-20		-40	-60	-70
RT.-HT.		40	50	55		90	100		40			50	55		90	100			40	50		55	90		100		40	50		55	90			100		40	50		55	90	100
Power supply (K.w.)		3.0	4.0	6.0		6.0	6.0		3.5			5.5	6.5		8.0	8.5			4.5	6.0		7.5	9.5		9.5		5.5	9.0		Ten	10.5			10.5		10.5	10.5		10.5	10.5	10.5
Weight  (Kg)		250						300										400								600									700
Material		Inner wall						SUS#304 stainless steel 2B panel
		Outer casing						High-strength cold-rolled steel plate double-sided fine powder baking paint
		System wind circuit						Glass fiber + polyurethane foam
System		Way						Centrifugal fan one broadband forced airflow circulation (top out and down)
		Refrigeration method						Single-stage mechanical compression refrigeration (or binary stacked refrigeration)
Chiller								Single fully enclosed piston type French Taikang compressor
Refrigerant								R404A American Shebang Environmental Protection Cold Coal (R23+404A)
Condensation method								Air-cooled or water-cooled
Heater								Alloy electric heating wire heater
Humidifier								Semi-closed steam humidification (boiler type)
Water supply method								For fully automatic circulating water supply (water quality requires resistivity>500 M)
Standard configuration								1 observation window (double-layer insulated tempered glass); 1 test hole 50mm (located on the left); 2-layer sample rack; 1 box lighting fixture (fluorescent lamp); 1 pack of gauze; 8 hooks; 2 fuses; 4 small wheels; 1 power cord
SafeProtect								Equipped with an explosion-proof pressure relief port, the box door is equipped with an explosion-proof chain, and the observation window is equipped with an explosion-proof grid. Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system.

Important Note: We offer customized sizing to meet the specific requirements of each user, providing a tailored fit for your unique testing needs.

Main features:
1. Explosion-proof and pressure relief port. When the battery explodes, the pressure is released to prevent the deformation of the box or the door of the box from falling off.
2. Box door plus explosion-proof chain, glass window plus explosion-proof grille. Prevent the box door from falling off or the glass splashing when the battery explodes. 
3. Tef-lon treatment of inner box and test rack, insulation, high temperature resistance, friction-resistant, prevent battery electrodes, polar ear contact box body short circuit.
4. Because the battery test system outside the box needs to be connected during the battery test. The test hole needs a thicker power cord to enter and exit. Have no way completely sealed. Long-term low-temperature and constant temperature operation of the evaporator frost causes the temperature to drift. Our refrigeration system has its own heat. Pump defrosting system. Refrigeration system
Automatic defrosting without stopping. The evaporator can be run below 0 degrees for at least 500 hours without frosting. The temperature does not drift, leading technology in the lithium electricity industry. It has an exclusive patent.
 

Company Profile

Certifications

Ship to Client's Factory

 

 

Our Partners

Packaging & Shipping