High Accuracy Battery Testing Impact Table for Reliable Performance Measurement Battery Tester
Product Description
Step into the future of precision testing with our innovative High Performance Temperature Humidity Chamber. This versatile masterpiece is meticulously crafted for high and low-temperature testing across a broad spectrum of electrical products, components, and materials. The chamber's environmental simulation reliability testing encompasses constant gradient, sudden mutation, and wet heat testing. Proudly developed by MENTEK, these chambers strictly conform to Chinese national standards/T10586-2006 and T10592-2008, guaranteeing exceptional accuracy and reliability.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: Every dimension can be meticulously customized to meet your precise specifications.
Relevant standard test requirements
Compliant with the prestigious standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014
Please refer to section 4.5 for the sample. Following the prescribed test method, the acceleration impact test should be conducted once fully charged. This test is performed sequentially in three mutually perpendicular directions. Detailed testing methodology is outlined in section 7.4.
After the experiment, proceed with one full discharge and charging cycle, adhering to the charging and discharging method specified in section 4.5. The sample should demonstrate no ignition, explosion, or leakage.
Our cutting-edge equipment adheres to the following rigorous testing standards:
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat China National Standard/T2423.34-2012 Test Z/AnnoDominique: Combination temperature and humidity tests within the equipment's performance range.
Structure of the Testing Chamber
The testing chamber's robust exterior is constructed from galvanized color steel plates, designed for exceptional durability and prolonged longevity.
The interiors are expertly crafted with SUS304 stainless steel, featuring side-mounted adjustable hanging hole strips alongside a versatile test track frame. A minimum of 10 cm thick layers of rigid polyurethane foam and glass wool provide outstanding thermal insulation. The interface between the inner and outer doors is constructed using premium electric wood chicken glass fiber board frames, ensuring elite low-temperature insulation. The door's sealing strip, made from double-channel series silicone foam, offers unrivaled wide temperature resistance.
Advanced Experimental Space Air Circulation:
Our sophisticated air supply system employs multi-blade aluminum wind turbines, proficiently engineered to withstand extreme temperatures. Driven by motors, these turbines efficiently channel air to the upper louvers, with return flow from the bottom, achieving remarkable uniformity of less than 2 º C throughout the expansive range of -70~100 º C, a precision benchmark recognized globally.
Controller Operating System
Featuring a state-of-the-art low-power (8W) temperature and humidity control device, we achieve exceptional temperature control precision of up to ± 3 º C, ensuring reliable and consistent performance.
1. High Resolution Screen:
Delight in crisp, clear visuals on a 7-inch TET true color LCD resistive touch screen, boasting an extraordinary resolution of 800 * 480.
2. High Program Capacity:
With expansive memory capacity for 1000 programs/1000 segments, 999 total loops, and 999 partial loops, our system offers 10 sets of program linking functions, complete with real-time temperature curve displays for swift query access.
3. High Data Storage Capacity:
Seamlessly manage 300 days' worth of historical data in storage operation mode by uploading directly to a hard disk or network cable, or fully integrating it into the controller for effortless data management.
4. Easy Connection:
Our cutting-edge controller is equipped with LAN standard Ethernet communication, boasting the capability to connect effortlessly with up to 16 devices through a single, intuitive software platform. Seamlessly integrate into regional networks via the machine's outflow interface, unlocking remote program control capabilities. Enjoy the luxury of real-time monitoring and historical curve playback, ensuring comprehensive oversight at your fingertips.
Heating and Humidification System
Expertly crafted with bare wire nickel chromium alloy electric heating tubes, our advanced system delivers exceptional performance with minimal thermal inertia and heating overshoot. Precision fluctuations are handled with finesse, ensuring your system operates at peak efficiency.
1. Humidifier:
Unleash the power of our sophisticated humidification system, where precision meets uniformity. The boiler method humidification cylinder guarantees unrivaled consistency, while the surface humidification approach offers swift operation and superior control precision. This innovation eradicates impurities like scale within the chamber, showcasing exceptional dyeing capability and impressive low humidity performance. Maintenance is a breeze, thanks to its seamless stainless steel shell with insulation resistance over 50M Ω, and an advanced anti-dry burning controller ensures heightened safety.
2. Optimizing Water Usage and Energy Efficiency:
Discover ultimate convenience with our 25L high-capacity water tank, designed with a front-mounted quick connection system, simplifying water and electricity connections for easy disassembly and cleaning. Experience precise dehumidification across three distinct humidity zones, significantly minimizing water usage while adhering to stringent national standards for high temperature and humidity conditions up to 85 º C and 85% RH. With the point cooling and dehumidification systems deactivated, its closed design dramatically curtails water consumption.
Invest in unparalleled equipment, meticulously engineered to thrive under the most demanding testing conditions.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When your product specifications demand exact wind speed requirements, our customized solution stands as your optimal choice. Tailored to meet your unique needs with precision.
2. Select the Right Water Supply System: RO Reverse Osmosis
Relying on pure water for humidification needs, our state-of-the-art equipment features an automatic water production system, delivering a continuous supply of pure water. This innovation saves you valuable time while providing unmatched convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
For operations that necessitate ongoing low-temperature and low humidity testing, our sophisticated cellular chemical dehumidification system is indispensable. It achieves a remarkable humidity range of up to 10 º C/10% RH or even lower, catering to your most stringent requirements.
4. LN.Two/ .LCO.2
Delve into our curated selection of professional products, meticulously imported from Europe and the United States, available in a wide array of complete specifications designed to meet your exact needs. LN.Two/ .LCO.2
Our advanced solenoid valves and integrated control systems are engineered to accommodate your rapid testing requirements, enabling swift acceleration and efficient temperature regulation.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Designed for dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system meets these rigorous demands with precision, serving as a pivotal auxiliary solution.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Facilitate frequent movement and operation of the test subject with our practical manual operation feature through the glass inner door (∧ 125Mm * Ea.), effectively minimizing environmental impact from opening the chamber door.
7. Real-Time Data Acquisition Recorder
Our recorders, built to comply with industry standards, offer simultaneous recording of multiple temperature measurements from both the testing environment and the test object. With a tape recorder, you can exclusively meet these specific recording needs with unmatched precision.
8. Advanced Computer Connection Operation Recording Software
2fcf7e28
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}