| Customization: | Available |
|---|---|
| After-sales Service: | Support Operation Guidance |
| Power Supply: | 380V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Relevant standard test requirements
Meets standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014
Refer to section 4.5 for the sample. According to the prescribed test method, the acceleration impact test shall be conducted after fully charged. The acceleration impact test shall be conducted in three mutually perpendicular directions in sequence. The test method is described in 7.4
After the experiment, continue one discharge and charging cycle according to the charging and discharging method specified in 4.5. The sample should not ig-nite, explode, or leak.
Main parameters
| Model | MBS-IS200 |
| Rated load | 10kg (Including fixtures and test products) |
| Table size | L200*W200mm |
| Impact waveform | Semi-sine wave |
| Peak acceleration (semi-sine wave) | 150~ 15,000m/s² |
| Pulse duration (semi-sine wave) | 0.6-20m/s |
| External size | W1000*L500*H2700mm |
| Equipment weight | 1500kg |
| Impact form | Free fall |
| Maximum drop height | 1500mm |
| Power supply | 3-phase 380V, 50/60Hz |
| Hydraulic source | Random configuration |
| Ambient temperature | 0~40ºC |
| Environmental humidity | Less than 85% |
| Reliability | The average fault-free cumulative working time is ≥1000h |
| Measurement and control system | ShockDAQ.Impact and collision measurement and control system |
| Applicable standards | GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria | Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
){kind=link}