Advanced Rapid Temperature Change Humid Testing Chamber Analyzer for Precision Control
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber-an extraordinary breakthrough in the realm of environmental simulation, crafted with exceptional precision and versatility. This cutting-edge chamber is engineered to conduct both high and low-temperature tests, accommodating an extensive array of electrical components, products, parts, and materials. Whether your requirements involve consistent conditions, gradient and rapid temperature shifts, or humid heat assessments, MENTEK's sophisticated chambers are designed to not only meet but exceed Chinese national standards T10586-2006 and T10592-2008, ensuring unmatched reliability and performance.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. External dimensions are precisely tailored, factoring in the intricate heating and cooling rates.
2. Water cooling type: Achieves optimal performance with water temperatures ranging from 10~28 ºC and a pressure between 0.1~0.3Mpa, maintaining exceptional cooling efficiency.
3. Functionality can be significantly enhanced with optional moisture and heat capabilities.
4. Offers the option to integrate a dry air blowing system for versatile testing scenarios.
5. Features an optional liquid nitrogen function for rapid cooling efficiency, achieving a remarkable 30 ºC/min cooldown.
6. The above specifications are standard, with customizable options available to cater to specific customer requirements.
The equipment meets the following testing standards
Our state-of-the-art testing equipment rigorously adheres to a comprehensive array of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Furthermore, it aligns with China National Standard/T2423.34-2012 Test Z/AnnoDominique, thus flexibly accommodating a broad spectrum of temperature and humidity scenarios, enhancing its extensive performance capabilities.
Structure of the testing chamber
The exquisite structure of the testing chamber features an exterior crafted from premium galvanized color steel plate, ensuring outstanding durability and superior safeguarding.
Inside, the chambers are meticulously constructed with SUS304 stainless steel plates, equipped with adaptable hanging hole strips for dynamic configurations. Each chamber includes a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are seamlessly connected using high-quality electric wood chicken glass fiber board frames, delivering exceptional insulation at low temperatures. The silicone foam door sealing strip, ingeniously designed with dual channels, offers remarkable temperature resilience.
Experimental space air circulation:
Utilizing an advanced air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, driven by powerful motors. These turbines expertly circulate air through upper louvers and return it from the bottom, maintaining a temperature uniformity of less than 2 ºC across an impressive range of -70~100 ºC, measured at an international standard of 10 points.
Controller operating system
The system boasts a state-of-the-art, low-power (8W) temperature and humidity control device, achieving unparalleled accuracy with a temperature control precision of ±3 ºC.
1. High resolution screen:
Experience vivid detail with a 7-inch TET true-color LCD resistive touch screen, offering a stunning resolution of up to 800 * 480 for crystal-clear visibility and effortless operation.
2. High program capacity:
With an expansive memory, it can store an incredible 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, provides 10 program linking capabilities, and features real-time temperature curve displays for seamless queries and in-depth analysis.
3. High data storage capacity:
Conveniently transfer historical data spanning up to 300 days by uploading directly via hard disk or network cable to your computer, or effortlessly load it into the controller for continuous data access and management.
4. Effortless Connectivity:
The controller is endowed with a LAN standard Ethernet communication interface, allowing seamless management of up to 16 devices via a sophisticated software platform. Its user-friendly outflow interface ensures smooth integration into regional networks, enabling remote programming, real-time monitoring, and effortless historical curve replay functions with supreme ease.
Heating and Humidification System
By integrating bare wire nickel-chromium alloy electric heating tubes, our system delivers minimal thermal inertia alongside exceptional precision in temperature control. State-of-the-art power controls effectively minimize heating overshoot, ensuring consistent optimal performance.
1. Humidifier:
Experience unmatched precision in environmental testing with our state-of-the-art humidification technology. The advanced humidification cylinder, utilizing a dependable boiler method, ensures even moisture distribution. The surface humidification via the water plate method provides rapid, precise control, flawlessly eliminating impurities like scale. Ideal for dyeing applications, it performs superbly in low humidity conditions, ensuring effortless maintenance. The seamless stainless steel shell of our humidification tube boasts insulation resistance over 50M Ω and includes a durable anti-dry burning controller to elevate safety.
2. Maximizing Water Efficiency and Energy Conservation:
Discover the efficiency of our front-mounted 25L capacity water tank, ingeniously equipped with a quick-connect system for seamless management of water and power. Enjoy hassle-free disassembly and cleaning, ensuring precise maintenance. Achieve meticulous dehumidification control across three distinct humidity zones, adhering to rigorous national standards for high temperature and humidity at 85 º C and 85% RH. Our advanced sealed design significantly minimizes water usage by deactivating the point cooling and dehumidification system, fostering sustainable operations.
Ensure your investment is secure with equipment crafted to endure the most challenging testing environments, guaranteeing unrivaled reliability and peak performance.
1. Selecting the Circulating Air Mode: Choose Courtyard Air Supply or a Variable Speed Motor
For products with specific wind speed requirements, this customizable solution delivers exceptional precision and adaptability, ensuring optimal performance tailor-made for your needs.
2. Selecting the Ideal Water Supply System: RO Reverse Osmosis
When precision is crucial in humidification, our advanced equipment ensures an uninterrupted pure water supply through an automated production process, maximizing convenience and time efficiency.
3. Cutting-Edge Polymer Film/Rotor Dehumidification System
For critical, long-term testing under low-temperature and low-humidity conditions, our sophisticated cellular chemical dehumidification system offers the ultimate solution. It accommodates an extensive humidity range down to 10 º C/10% RH or lower, meeting the most stringent requirements with unmatched efficacy.
4. LN.Two/ .LCO.2
We present elite professional products directly sourced from the leading manufacturers across Europe and the United States, offering a comprehensive range of specifications. LN.Two/ .LCO.2
Harness the power of our solenoid valves and advanced control systems to meet your urgent testing needs with rapid thermal acceleration and precise temperature reduction, ensuring precise results every time.
5. Revolutionary Ultrasonic Cooling and Humidification System
Our groundbreaking ultrasonic cooling and humidification system is engineered to tackle the dynamic testing challenges presented by large heat loads in high temperature and humidity environments. Utilize it as an auxiliary component to achieve peak performance in these demanding scenarios.
6. Integrate a Glass Inner Door and Enable Manual Operation Access
To minimize environmental impact during frequent testing or object transfer, integrate manual operations via a glass inner door (∧ 125Mm * Ea.). This intelligent design significantly reduces disruptions from frequent door openings, preserving the integrity of your tests.
7. Real-Time Test Data Collection Recorder
In scenarios where capturing multiple temperature readings at once is vital, it's crucial to choose a recorder that meets specification standards. A tape recorder emerges as the most dependable option, expertly fulfilling these stringent requirements and ensuring accurate temperature monitoring.
8. Computer Connection Operation Recording Software
Our state-of-the-art connection software, engineered specifically for Mattel's environmental measurement machine suite, endows users with unrivaled capabilities. It facilitates seamless cross-machine monitoring, streamlines data extraction from operational units, and provides superior electronic functionalities, delivering an exceptionally user-friendly experience.
Structural Technology
1. The Company's Hardware Equipment:
Explore our advanced range of imported machinery from Germany and Taiwan, featuring the AMADA AIRS.-255NT Punching system. Each piece, from carbon oxide to argon welding machines, embodies precision and innovation. Engage with multiple Autodesk Inventor 3D drawing software applications, expertly applied for sheet metal design, disassembly, and virtual assembly, setting new benchmarks in modern manufacturing excellence.
2. Constructed from premium galvanized steel, the shell's durability is heightened by a cutting-edge electrostatic powder spray baking paint finish, offering lasting protection and a visually stunning aesthetic.
Three.. With precision engineering using imported SUS #304 stainless steel, the inner box is meticulously crafted through a comprehensive full argon arc welding process to prevent high-temperature and high-humidity air leakage. Its rounded corners facilitate efficient condensate drainage, enhancing overall performance.
Revolutionary Refrigeration System Technology
Embrace the pinnacle of refrigeration system management with our cutting-edge 3D-optimized frequency conversion control technology, ensuring precise and adaptable thermal regulation for superior performance.
Our variable frequency refrigeration system, despite operating on a stable 50HZ power supply frequency, cleverly utilizes a frequency converter to adjust compression speed. This aligns cooling output with real-time test chamber demands. As temperatures vary, compressor frequency dynamically shifts, enhancing energy efficiency and enabling swift cooling for unparalleled performance.
The variable frequency refrigeration system in our test chamber maintains a stable, minimally fluctuating temperature environment. This system efficiently balances suction and exhaust pressures, boosting operational consistency.
Experience the benefits of energy-efficient refrigeration systems and state-of-the-art energy-saving innovations crafted to transform performance.
1. Harnessing PID and PWM-driven VRF technology with electronic expansion valves, our systems achieve outstanding low-temperature energy efficiency through optimized thermal flow control. The integration of PID + PWM systems ensures precise refrigerant flow regulation, eliminating the necessity for auxiliary heating.
With precise three-way flow adjustments across refrigeration, cold side, and heating side pipelines, automatic temperature constancy is achieved. This technique excels in low-temperature conditions, reducing energy consumption by 30% and maximizing performance.
Our technology, anchored by the Danish Dan-foss Company's ETS System electronic expansion valve, dynamically adjusts refrigeration capacity to accommodate varying cooling rates, thus optimizing compressor cooling capacity.
2. Boasting dual compressor group design technology, our systems autonomously start and stop in alignment with load conditions, ensuring peak efficiency through advanced series design.
The refrigeration unit configuration features a binary compound of semi-closed compressors and a fully dense single-stage system, astutely adjusting to load requirements for optimal cooling capacity and prolonging compressor lifespan.
Innovative Cold Circuit Technology
The power distribution layout is executed with utmost precision according to technical department blueprints, employing globally celebrated electrical component brands to ensure optimal reliability.
At Guangdong MENTEK Testing Equipment Co., Ltd, we take pride in integrating acclaimed brands like Omron, Sch-neider, and Germany's Phoenix Terminal block into our designs. Each line code is distinctly marked to ensure user-friendliness and reliability. We exclusively select the most reputable brands in China to guarantee exceptional performance and durability.
Incorporating the renowned quality of Pearl River Cable, our products stand as a testament to impeccable wire performance and unmatched excellence. Our control lines, made with a minimum gauge of 0.75 Square RV soft copper wire, guarantee robust conductivity. Essential components such as motor compressors are crafted to meet EC standards, with trap diameters precisely selected to align with cable groove wiring safety current standards. The cable port of our equipment is expertly sealed to proactively prevent frost-induced short circuits, safeguarding the terminal within the junction box.
In our assembly, every terminal fixing screw is meticulously connected with a precise fixed torque. This ensures a rapid and secure connection, effectively eliminating risks such as loose connections that could lead to fires. This meticulous approach enhances safety and provides unwavering reliability.
Refrigeration Series Process: A Comprehensive and Integrated Approach
1. Standardization: The Essential First Step Towards Superior Quality
1.1 Demonstrating our steadfast commitment to superior quality and dependability, our premium steel pipe piping process, paired with stringent welding standards, exemplifies our dedication to excellence.
By strictly following standardized pipe layouts, we ensure that our model systems exemplify stability and reliability.
1.2 Utilizing state-of-the-art Italian imported pipe bending machinery, we craft flawless steel pipe bends. This advanced technique significantly reduces welding points and minimizes oxide production within the tubes during welding, thereby enhancing the system's overall reliability.
Ensuring Consistent System Reliability: Our Unwavering Promise
Advanced Shockproof Design and Robust Pipeline Support
2.1 At Meitec, we uphold rigorous standards for supporting and preventing shocks in refrigeration copper pipes. With a comprehensive perspective on seismic protection, we incorporate arc bends and specialized nylon-fixed clamping techniques to prevent deformation and leaks caused by circular vibrations and temperature fluctuations, thereby strengthening the entire refrigeration system's reliability.
Enhancing the Trustworthiness of the Entire Refrigeration System
2.2 Innovating with an Advanced Oxidation-Free Welding Process
The internal cleanliness of a refrigeration system's pipeline is widely acknowledged as crucial to its performance and durability. Metco employs a standardized charging welding process to prevent excessive oxide contamination during welding, ensuring optimal performance.
Through precise and meticulous practices, Metco significantly enhances the refrigeration system's efficiency and prolongs its operational lifespan by minimizing oxide pollution during welding, thus optimizing overall reliability.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}