State-of-The-Art Climate Simulation Equipment for Accurate Temperature Humidity Control Testing Device
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber, a marvel in environmental simulation crafted with versatility and precision in mind. This state-of-the-art chamber is meticulously engineered to perform both high and low-temperature tests with unparalleled accuracy on a broad spectrum of electrical components, diverse products, parts, and materials. Whether your testing requirements demand constant, gradient, rapid fluctuation temperatures or wet heat assessments, MENTEK's advanced chambers are meticulously designed to not only meet but exceed the Chinese national standards T10586-2006 and T10592-2008, ensuring unmatched reliability and steadfast performance that sets the benchmark for excellence in climate simulation technology.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are meticulously determined according to the specific heating and cooling rate requirements.
2. Water cooling type specifications: water temperature range of 10~28 ºC, paired with a water pressure range of 0.1~0.3Mpa, to ensure superior cooling performance.
3. Capable of enhancing functionality with an additional dampness and heat feature for optimized testing conditions.
4. Enjoy the flexibility of an optional dry air blowing system to cater to specific testing needs.
5. For rapid cooling efficiency, an optional liquid nitrogen function is available, offering a rate of 30 ºC/min.
6. The above loads are standard configurations but can be custom-designed to meet specific customer requirements, ensuring tailored solutions.
The equipment meets the following testing standards
Our cutting-edge testing equipment strictly adheres to a comprehensive range of rigorous standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Notably, it also complies with the China National Standard/T2423.34-2012 Test Z/AnnoDominique. This adherence ensures our equipment supports a vast array of temperature and humidity scenarios within its comprehensive performance capabilities, offering reliability and precision beyond compare.
Structure of the testing chamber
The formidable structure of the testing chamber features an outer shell expertly crafted from premium galvanized color steel plate, ensuring durability and superior protection against the elements.
Internally, the chambers showcase SUS304 stainless steel plates complete with adaptable hanging hole strips for dynamic configurations. Each chamber is masterfully outfitted with a test track frame, insulated with a robust 10 cm layer of rigid polyurethane foam and glass wool. The inclusion of high-quality electric wood chicken glass fiber board frames to securely link the inner and outer box doors provides exceptional low-temperature insulation. The silicone foam door sealing strip, meticulously designed with dual channels, boasts remarkable temperature resistance for optimal performance.
Experimental space air circulation:
Harnessing a sophisticated air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, powered by motors. These advanced turbines deftly circulate air through upper louvers and return it from the bottom, ensuring temperature uniformity of less than 2 ºC over an impressive range of -70~100 ºC, thoroughly evaluated at an international standard of 10 points for consistency and precision.
Controller operating system
The system is integrated with a state-of-the-art, low-power (8W) temperature and humidity control device, guaranteeing remarkable accuracy with an outstanding temperature control precision of ±3 ºC, setting a new standard in control technology.
1. High resolution screen:
Immerse yourself in vivid detail with a stunning 7-inch TET true-color LCD resistive touch screen, offering an impressive resolution of up to 800 * 480 for crystal-clear visibility, ensuring ease of use and clarity.
2. High program capacity:
Boasting a vast memory, it has the capability to store an impressive 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays to facilitate effortless queries and in-depth analysis.
3. High data storage capacity:
Seamlessly transfer historical data spanning up to 300 days by uploading directly via hard disk or network cable to your computer, or effortlessly load it into the controller for continuous access, all designed for your convenience and operational efficiency.
4. Seamless Connectivity:
Experience unmatched control with our cutting-edge controller, featuring LAN standard Ethernet communication. Effortlessly manage up to 16 devices through a single software platform. The outflow interface ensures seamless network integration, while remote program management, real-time monitoring, and easy access to historical data become a breeze. Enjoy the ultimate convenience in control and data management.
Heating and Moisture Control System
Step into the future of heating efficiency with our pioneering bare wire nickel-chromium alloy electric heating tubes. Crafted for low thermal inertia and minimal overshoot, they offer exceptional precision in temperature control. Coupled with advanced power management, this system ensures peak performance for all your testing needs.
1. Advanced Humidification System:
Transform your testing with our revolutionary humidification technology. Featuring an advanced humidification cylinder that employs the proven boiler method, it ensures exceptional moisture uniformity. For rapid and precise control, our water plate surface humidification delivers unmatched speed and accuracy, efficiently removing impurities like scale-ideal for dyeing applications in low humidity conditions, with easy maintenance. Constructed from seamless stainless steel, our humidification tube offers insulation resistance exceeding 50M Ω and is equipped with a robust anti-dry burning controller for enhanced safety.
2. Water Efficiency and Energy Conservation Maximized:
Embrace the convenience of our front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for efficient management of water and power. Enjoy easy disassembly and cleaning to uphold precision. Achieve precise dehumidification control across three distinct humidity zones, adhering to strict national standards for high temperature and humidity scenarios at 85 º C and 85% RH. Our advanced sealed design, which deactivates point cooling and dehumidification systems, significantly curtails water consumption, heralding a new era of sustainable operation.
Invest in our equipment engineered for the most demanding testing environments, offering unparalleled reliability and remarkable performance.
1. Choose the Circulating Air Mode: Select Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution provides precision and adaptability, ensuring optimal performance every time.
2. Optimal Water Supply System: RO Reverse Osmosis
When precision humidification is vital, our equipment offers an uninterrupted supply of pure water through an automated production process, enhancing convenience and time efficiency.
3. Advanced Polymer Film/Rotor Dehumidification System
For rigorous long-term testing in low-temperature and low-humidity environments, our sophisticated cellular chemical dehumidification system stands as your ultimate solution. It handles a wide humidity range down to 10 º C/10% RH or lower, meeting the strictest standards.
4. LN.Two/ .LCO.2
We provide premier professional products with a full range of specifications, directly sourced from distinguished manufacturers across Europe and the United States. LN.Two/ .LCO.2
Employ our solenoid valves and sophisticated control systems to satisfy your urgent testing requirements with rapid thermal acceleration and accurate temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic testing of large heat loads at high temperatures and humidity, our groundbreaking ultrasonic cooling and humidification system is crafted to overcome these challenges. Utilize it as an auxiliary component to achieve peak performance.
6. Integrate a Glass Inner Door for Manual Operation Access
Minimize environmental impact during frequent testing or object movement by incorporating manual operations through a glass inner door (∧ 125Mm * Ea.). This innovative design significantly reduces disruptions from frequent door openings, enhancing testing integrity.
7. Real-Time Test Data Collection and Recording
In demanding scenarios where precision and reliability are critical, our tape recorder emerges as the unrivaled leader. Designed for simultaneous multi-temperature recording, it surpasses the most stringent specification standards, ensuring your operations are always managed by experts.
8. Advanced Computer Connection Operation Recording Software
Our state-of-the-art connection software is specially crafted for Mattel's environmental measuring machine suite, offering users enhanced capabilities. Enjoy seamless multi-machine monitoring, efficient data retrieval from operational units, and superior electronic features, simplifying usability like never before.
Innovative Structural Technology
1. Our Company's Premier Hardware Equipment:
Explore our sophisticated range of German and Taiwan imported machinery, featuring the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding machines, each model exemplifies precision and innovation. Master multiple Autodesk Inventor 3D drawing software applications for sheet metal design, virtual assembly, and disassembly, redefining modern manufacturing excellence.
2. Constructed from premium galvanized steel, the shell offers remarkable durability, further enhanced with an advanced electrostatic powder spray baking paint finish. This ensures enduring protection and a refined aesthetic appeal.
Three.. Meticulously crafted with imported SUS #304 stainless steel, the inner box employs a full argon arc welding process to prevent high-temperature and high-humidity air leakage. Its rounded corners promote efficient condensate drainage, optimizing performance.
Revolutionary Refrigeration System Technology
Our 3D-optimized refrigeration system management, featuring cutting-edge frequency conversion control technology, provides precise and flexible thermal regulation, ensuring unparalleled adaptability.
Within our variable frequency refrigeration system, even with a consistent power supply frequency of 50HZ, the frequency converter intelligently adjusts compression speed. It tailors cooling output to real-time test chamber loads, dynamically adjusting compressor frequency as chamber temperatures fluctuate, enhancing energy efficiency and ensuring rapid cooling for exceptional performance.
Experience impeccable stability with our test chamber's variable frequency refrigeration system, maintaining a consistent temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, optimizing operational consistency for top-tier performance.
Benefit from energy-efficient refrigeration system technology combined with cutting-edge energy-saving innovations, designed to maximize performance while minimizing resource consumption.
1. Utilize the power of PID and PWM-driven VRF technology, employing electronic expansion valves for optimal thermal flow control. Achieve low-temperature energy efficiency with PID + PWM systems enhancing refrigerant flow regulation, ensuring effective operation without auxiliary heating.
With precise three-way flow adjustment of refrigeration, cold side, and heating side pipelines, achieve automatic temperature constancy. This method excels in maintaining optimal performance under low-temperature conditions, reducing energy consumption by 30% and optimizing overall efficiency.
Our technology, leveraging the Danish Dan-foss Company's ETS System electronic expansion valve, provides dynamic refrigeration capacity adjustments. It adapts to diverse cooling rates, optimizing compressor cooling capacity for superior efficiency.
2. Employing a dual compressor group design technology, automatic start-stop functionality aligns with load conditions to optimize efficiency, facilitated by our advanced series design.
The refrigeration unit features a binary compound of semi-closed compressors and a fully dense single-stage system. It intelligently adapts to load requirements, ensuring optimal cooling capacity and extending compressor longevity.
Innovative Cold Circuit Technology
Power distribution layout is expertly executed according to technical department blueprints, utilizing globally recognized electrical component brands for unsurpassed reliability.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate time-honored brands like Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is clearly marked for ease of use and reliability. We select only the most reputable Chinese brands to ensure top-notch performance and durability.
Choose the prestigious Pearl River Cable as our esteemed brand, promising unrivaled wire quality and outstanding performance. Our control lines feature a minimum specification of 0.75 Square RV soft copper wire, ensuring strong and effective conductivity. Key load components, such as motor compressors, are meticulously engineered to meet the exacting EC standards. Trap diameters are precisely selected to comply with cable groove wiring safety current standards. The machine's cable port is expertly sealed, preventing frost-induced short circuits, thereby safeguarding the terminal within the junction box from any potential harm.
Every terminal fixing screw is meticulously connected with a standard fixed torque, guaranteeing secure and rapid connections while mitigating risks like loose fires. This meticulous attention to detail significantly elevates the safety and reliability of our systems.
Refrigeration Series Process: An All-Encompassing and Comprehensive Approach
1. Standardization: Charting the Course to Unmatched Excellence
1.1 Our distinguished steel pipe piping process, in conjunction with rigorous welding standards, highlights our steadfast commitment to excellence and unrivaled reliability.
By consistently following standard pipe layouts, we ensure the unwavering stability and dependable reliability of our model systems.
1.2 Utilizing advanced Italian imported pipe bending machinery, we craft seamless steel pipe bends. This state-of-the-art process significantly reduces the need for welding points and minimizes oxide generation within the tubes during welding, thereby enhancing overall system reliability.
Placing System Reliability at the Forefront
Innovative Shockproof Design and Long-Lasting Pipeline Support
2.1 At Meitec, we implement stringent standards for the support and shock prevention of refrigeration copper pipes. By thoroughly evaluating potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping to protect against deformation and leakage caused by circular vibration and temperature fluctuations, thereby boosting the overall reliability of the refrigeration system.
Enhancing Reliability Across the Entire Refrigeration System
2.2 Advanced Oxidation-Free Welding Process
It is well established that the cleanliness of a refrigeration system's pipeline is vital to its efficiency and longevity. Metco employs a standardized charging welding procedure to prevent excessive oxide contamination during the welding process, thereby ensuring peak performance.
Through diligent practices, Metco boosts the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide pollution during welding, thus maximizing reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}