Climate Simulation Rapid Temperature Humidity Change Equipment for Precision Environmental Control Testing
Product Description
Product features
1. The humidity control function can be selected. The temperature rise and fall rate is adjustable. Maximum rate can reach 20ºC/Min, auxiliary liquid nitrogen refrigeration can reach 30ºC/Min;
2. Equipped with a frequency converter, the wind speed can be adjusted. It can be set to reduce in a constant state. Wind speed; Optional dry air blowing system. Prevent condensation in the box and samples frost;
3. Cold output energy-saving design, recognized by third-party testing institutions. In the major refrigeration department. Unified middle school. The energy-saving effect is very significant.
Main Parameters
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC) - 70+150ºC(-55+80ºC) |
| Temperature fluctuation |
±0.3ºC±0.5ºC |
| Temperature deviation |
± |
| Humidity deviation |
±3%RH(<75%RH)±5%RH (≤75%RH) |
| Heating and cooling rate |
5/10/15/20ºC/min |
| Standard load (aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
Refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window (mm) |
300*400/400*600 |
| Test hole (mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size (cm) |
Width |
70 |
80 |
100 |
130 |
| Height |
80 |
90 |
100 |
115 |
| Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V 50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note
1. The external dimensions are determined according to the heating and cooling rate
2. Water cooling type (water temperature 10~28ºC, water pressure 0.1~0.3Mpa to ensure cooling performance)
3. Can increase the function of dampness and heat
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30ºC/min)
6. The above loads are standard loads and can be designed according to customer requirements.
Innovative Structural Technology
1. Our Company's Premier Hardware Equipment:
Discover our elite assortment of German and Taiwan-imported machinery, featuring the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding devices, each piece epitomizes precision and cutting-edge innovation. Master an array of Autodesk Inventor 3D drawing software applications for sheet metal design, virtual assembly, and disassembly, setting a new standard in modern manufacturing excellence.
2. Constructed from high-quality galvanized steel, the exterior shell boasts exceptional durability, further enhanced by an advanced electrostatic powder spray baking paint finish. This combination ensures lasting protection and a sophisticated aesthetic appeal.
Three.. Skillfully engineered with imported SUS #304 stainless steel, the internal box utilizes a comprehensive argon arc welding process to prevent air leakage under high-temperature and high-humidity conditions. The rounded corners facilitate efficient condensate drainage, optimizing operational performance.
Revolutionary Refrigeration System Technology
Our 3D-optimized refrigeration system management employs state-of-the-art frequency conversion control technology, offering precise and adaptable thermal regulation to ensure unmatched flexibility and performance.
In our variable frequency refrigeration system, even with a stable power supply frequency of 50HZ, the frequency converter intelligently modulates compression speed. It customizes cooling output to accommodate real-time test chamber loads, dynamically adjusting compressor frequency as chamber temperatures vary, enhancing energy efficiency and delivering rapid cooling for superior performance.
Experience the flawless consistency of our test chamber's variable frequency refrigeration system, maintaining a stable temperature environment with the smallest fluctuations. This system ensures balanced suction and exhaust pressures, optimizing operational reliability for superior performance.
Harness the power of our energy-efficient refrigeration system technology integrated with groundbreaking energy-saving innovations, engineered to elevate performance while minimizing resource consumption.
1. Leverage the capabilities of PID and PWM-driven VRF technology, utilizing electronic expansion valves for precise thermal flow control. Achieve low-temperature energy efficiency through PID + PWM systems enhancing refrigerant flow regulation, ensuring effective operation without the need for auxiliary heating.
With meticulous three-way flow regulation of refrigeration, cold side, and heating side pipelines, achieve automatic temperature stability. This method excels in maintaining optimum performance under low-temperature conditions, reducing energy consumption by 30% and boosting overall efficiency.
Our system, utilizing the Danish Dan-foss Company's ETS System electronic expansion valve, offers dynamic adjustments in refrigeration capacity. It adapts to varied cooling rates, optimizing compressor cooling capacity for heightened efficiency.
2. Featuring a dual compressor group design, our technology employs automatic start-stop functionality aligned with load conditions to maximize efficiency, enabled by our advanced series design.
The refrigeration unit incorporates a binary compound of semi-closed compressors and a fully dense single-stage system. It intelligently adjusts to load demands, ensuring optimal cooling capacity and prolonging compressor lifespan.
Innovative Cold Circuit Technology
The power distribution layout is masterfully crafted in strict accordance with the technical department's blueprints, harnessing globally esteemed electrical components. This careful selection from revered brands ensures unparalleled reliability, positioning our systems at the pinnacle of electrical excellence.
At Guangdong MENTEK Testing Equipment Co., Ltd, we are committed to integrating legendary brands like Omron, Sch-neider, and Germany Phoenix Terminal block within our innovative designs. Each line code is meticulously marked, delivering both ease of use and steadfast reliability. Only the most esteemed Chinese brands are handpicked, promising exceptional performance and lasting durability.
Opt for the esteemed Pearl River Cable, a brand synonymous with unsurpassed wire quality and stellar performance. Our control lines boast a minimum specification of 0.75 Square RV soft copper wire, ensuring optimal conductivity. Key load components, including motor compressors, are rigorously engineered to meet the stringent EC standards. Precisely chosen trap diameters adhere to cable groove wiring safety standards, while expertly sealed cable ports avert frost-induced short circuits, safeguarding the terminal within the junction box against potential harm.
Every terminal fixing screw is meticulously secured with a standard fixed torque, ensuring both swift and secure connections. This meticulous attention to detail profoundly enhances the safety and reliability of our systems, mitigating risks like loose connections and potential fires.
Refrigeration Series Process: A Holistic and Comprehensive Methodology
1. Standardization: Navigating the Pathway to Unparalleled Excellence
1.1 Our exceptional steel pipe piping process, combined with rigorous welding standards, underscores our unwavering dedication to excellence and unmatched reliability.
By adhering to standard pipe layouts, we guarantee steadfast stability and dependable reliability across our model systems, ensuring optimal performance at every turn.
1.2 With advanced Italian imported pipe bending machinery, we create seamless steel pipe bends. This cutting-edge process significantly reduces welding points and minimizes oxide formation during welding, thereby greatly enhancing overall system reliability.
Emphasizing System Reliability as Our Prime Objective
Innovative Shockproof Design and Durable Pipeline Support
2.1 At MENTEK, we enforce stringent standards for supporting and shockproofing refrigeration copper pipes. By thoroughly assessing potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping. This approach protects against deformation and leakage caused by circular vibration and temperature fluctuations, thereby significantly boosting the overall reliability of the refrigeration system.
Revolutionizing Reliability Throughout the Entire Refrigeration System
2.2 Advanced Oxidation-Free Welding Techniques
Recognizing that pipeline cleanliness is crucial for a refrigeration system's efficiency and longevity, MENTEK implements a standardized charging welding procedure to avert excessive oxide contamination. This meticulous approach ensures peak performance every time.
Through diligent practices, MENTEK enhances the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide contamination during welding, thereby maximizing reliability and performance at every stage.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}