High Accuracy Battery Impact Testing Table for Reliable Performance Evaluation Analyze
Product Description
Step into the future of precision with our remarkable High Performance Temperature Humidity Chamber, a masterpiece of versatility tailored for high and low-temperature testing across a diverse spectrum of electrical products, components, and materials. Designed by MENTEK, this chamber embodies our advanced environmental simulation reliability testing repertoire, including constant gradient, sudden mutation, and wet heat testing. Crafted with meticulous adherence to Chinese national standards/T10586-2006 and T10592-2008, our chambers uphold a benchmark of unmatched accuracy and reliability.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: Dimensions are meticulously customizable to meet your exact specifications.
Relevant Standard Test Requirements
Complies with standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014.
Refer to section 4.5 for sample processing. Post full charge, conduct the acceleration impact test sequentially in three mutually perpendicular directions, as detailed in test method 7.4.
Post-experiment, execute a discharge and charge cycle per the method in 4.5. The sample must not ig-nite, explode, or leak.
Our state-of-the-art equipment proudly aligns with the following stringent testing standards:
National Standard/T2423.1-2008 Test A: Low Temperature, National Standard/T4243.2-2008 Test B: High Temperature (Partial), National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat, Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat, China National Standard/T2423.34-2012 Test Z/AnnoDominique: Temperature and humidity combination or any other temperature and humidity tests within the equipment's extensive performance range.
Structure of the Testing Chamber
Our testing chamber's robust exterior is forged from galvanized color steel plates, ensuring unmatched durability and longevity.
The interior is exquisitely constructed with SUS304 stainless steel, complemented by side-mounted adjustable hanging hole strips and a flexible test track frame. A minimum of 10 cm thick rigid polyurethane foam and glass wool layers serve as superior thermal insulation. The interface between the inner and outer doors incorporates premium electric wood chicken glass fiber board frames for exceptional low-temperature insulation. The door's sealing strip, crafted from double-channel series silicone foam, guarantees exceptional wide temperature resistance.
Advanced Experimental Space Air Circulation:
Our sophisticated air supply system harnesses multi-blade aluminum wind turbines, meticulously engineered to endure temperature extremes. Driven by powerful motors, these turbines channel air flawlessly to the upper louvers, with a return flow from the bottom, achieving an unparalleled uniformity of less than 2 º C across the impressive range of -70~100 º C, setting a globally recognized precision standard.
Controller Operating System
Through the use of an innovative low-power (8W) temperature and humidity control device, we attain a temperature control precision of up to ± 3 º C, ensuring consistently reliable performance.
1. High Resolution Screen:
Immerse yourself in crystal-clear visuals on a 7-inch TET true color LCD resistive touch screen, offering a remarkable resolution of 800 * 480.
2. High Program Capacity:
Boasting an extensive memory for 1000 programs/1000 segments, with 999 total loops and 999 partial loops, our system includes 10 sets of program linking functions, along with real-time temperature curve displays for instant access to queries.
3. High Data Storage Capacity:
Effortlessly transfer 300 days' worth of historical data in storage operation mode by uploading directly to a hard disk or network cable, or seamlessly integrate it into the controller for streamlined data management.
4. Easy Connection:
Our state-of-the-art controller is designed with LAN standard Ethernet communication, seamlessly connecting up to 16 devices with just a single software interface. Effortlessly integrate into regional networks through the machine's intuitive outflow interface, empowering you with remote program control capabilities. Enjoy real-time monitoring and delve into historical curve playback for unparalleled insights.
Heating and Humidification System
Our system is ingeniously engineered with bare wire nickel chromium alloy electric heating tubes, ensuring minimal thermal inertia and heating overshoot. It delivers high precision fluctuations, all honed to perfection for your exacting standards.
1. Humidifier:
Our cutting-edge humidification system offers unprecedented uniformity. Employing a humidification cylinder via the boiler method guarantees consistent outcomes. For rapid results, the surface humidification (water plate method) provides swift operation with enhanced control precision, effortlessly keeping impurities like scale at bay. Exceptional in its dyeing capability and low humidity performance, it is easy to maintain a pristine condition. The humidification tube, crafted with a seamless stainless steel shell, boasts insulation resistance over 50M Ω, complemented by an advanced anti dry burning controller for superior safety.
2. Optimizing Water Usage and Energy Efficiency:
Our innovative front-mounted, 25L high-capacity water tank features a quick connection design, streamlining water and electricity plugging, and simplifying disassembly and cleaning. Achieve precise dehumidification across three distinct humidity zones, substantially reducing water usage while complying with national standards for high temperature and humidity settings like 85 º C and 85% RH. With the point cooling and dehumidification system off, the closed design significantly curtails water consumption.
Invest in equipment meticulously crafted to excel in the most demanding testing scenarios.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When your products necessitate specific wind speed parameters, our bespoke solution is your optimal choice, tailored to meet your precise requirements.
2. Select the Right Water Supply System: RO Reverse Osmosis
Our humidification system exclusively utilizes pure water. This automatic water production system continuously provides pure water, maximizing efficiency and convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
When enduring low-temperature and low humidity testing is crucial, our cellular chemical dehumidification system is indispensable, achieving a remarkable humidity range of up to 10 º C/10% RH or even lower.
4. LN.Two/ .LCO.2
Discover our premium range of professional products, meticulously imported from Europe and the United States, offering complete specifications to meet your every need. LN.Two/ .LCO.2
Our sophisticated solenoid valves and integrated control systems are engineered to cater to your rapid testing demands, offering swift acceleration and efficient temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Specifically designed for dynamic high heat load testing in severe temperature and humidity scenarios, our ultrasonic cooling and humidification system efficiently meets these rigorous demands, serving as an essential auxiliary system.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Facilitating frequent movement and operation of the test subject is simplified by incorporating manual operation via the glass inner door (∧ 125Mm * Ea.), effectively mitigating environmental impact from opening the chamber door.
7. Real-Time Data Acquisition Recorder
For the simultaneous recording of multiple temperature readings from both the testing environment and the test object, our recorders are aligned with industry standards. Choose our tape recorder as your exclusive solution for these specific needs.
8. Advanced Computer Connection Operation Recording Software
3f7fe7bd
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}