High Low Temperature Damp Heat Tester for Climate Testing Equipment Humidity Analyzer
Product Description
Unveiling the extraordinary Advanced Humid Hot Testing Machine, an avant-garde creation by Guangdong MENTEK Testing Equipment Co.,Ltd. This exceptional apparatus is meticulously designed to perform flawlessly in high and low temperature testing across a diverse array of electrical products, parts, and materials. Immerse yourself in unrivaled environmental simulation, delivering precise reliability testing that embraces both constant and gradient temperature variations, along with comprehensive wet heat evaluations. Constructed in strict adherence to Chinese national standards/T10586-2006 and T10592-2008, our cutting-edge humidity and heat test chambers guarantee unmatched precision and quality.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant Standard Test Requirements
Safety Test of Monomer Battery: The temperature cycle test is meticulously executed following these detailed steps
1. 1 The Monomer battery is adeptly charged according to the esteemed 6.1.3 method
1.2 The Monomer battery is carefully placed in the temperature chamber. The chamber is calibrated according to the specifics in Table 1 and Figure 2. The cycle is repeated 5 times, with observations recorded over a 1-hour period.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 - Temperature Cycle Test: Detailed Temperature and Time of Each Cycle
Battery Module Safety Test: The temperature cycle test is meticulously executed following these detailed steps
1.1.1 The battery module is expertly charged in accordance with the 6.1.4 method
1.1.2 The battery module is securely positioned in the temperature chamber, which is calibrated 5 times following the guidelines in Table 1 and Figure 2. Observations are diligently made over a 1-hour duration
The equipment adheres to the following pioneering industry testing standards
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat China National Standard/T2423.34-2012 Test Z/AnnoDominique: Execute comprehensive assessments of temperature and humidity combinations or other specifications within the capabilities of the equipment.
Intricately Designed Structure of the Testing Chamber
Expertly crafted with precision, the outer shell of the test box is made from robust galvanized color steel plate.
The inner boxes feature outstanding craftsmanship using SUS304 stainless steel plates. Ingeniously designed, they include adjustable hanging hole strips for consistent test track placement. Surrounded by at least 10 cm of rigid polyurethane foam and glass wool, these thermal insulation layers ensure superior performance. The front doors, an engineering marvel, are constructed with high-grade electric wood chicken glass fiber board frames for outstanding low-temperature insulation, complemented by silicone foam sealing strips able to endure a broad temperature range.
Efficient Experimental Space Air Circulation:
A brilliantly designed air supply system utilizes multi-blade aluminum wind turbines, resilient against high and low temperatures. Powered by formidable motors, air is deftly directed to the upper louvers and recirculated from the bottom, maintaining a deviation of less than 2 ºC throughout the -70~100 ºC range, aligning with international benchmarks set at 10 points.
Advanced Controller Operating System
Furnished with a pioneering low-power (8W) temperature and humidity control device, which ensures remarkable precision in temperature regulation with an accuracy reaching ± 3 ºC.
1. High-Resolution Display Screen:
Featuring a captivating 7-inch TET true color LCD resistive touch screen, offering an exquisite resolution of up to 800 * 480.
2. Extensive Program Capacity:
Revolutionize your testing experience with our cutting-edge system that boasts a massive memory capacity, ingeniously designed to accommodate 1000 programs and 1000 segments, alongside 999 total loops and 999 partial loops. Take advantage of the seamless integration of 10 program linking functions that elevate your control to new heights. Revel in the real-time temperature curve display, crafted for effortless direct queries, delivering instant access to critical data.
3. Expansive Data Storage Capacity: Elevate your data management with our unparalleled storage solutions.
Efficiently manage your historical data with ease, as our system allows for the seamless transfer and storage of operational data spanning up to 300 days. Effortlessly upload data to a computer via a network cable, or directly integrate data into the controller for streamlined operations.
4. Seamless Connectivity: Experience the future of integrated technology and smooth communication.
Harness the power of LAN standard Ethernet communication with our advanced controller, designed to effortlessly connect up to 16 devices through a single software interface. The fully integrated outflow interface connects smoothly into regional networks, unlocking the full potential of remote program control. Enjoy enhanced capabilities with real-time monitoring and historical curve playback, bringing unparalleled efficiency to your testing environment.
Sophisticated Heating and Humidification System: A marvel of engineering designed for superior control and consistency.
Crafted with precision and excellence, our system utilizes bare wire nickel chromium alloy electric heating tubes, ensuring low thermal inertia and minimal heating overshoot. Experience high-precision fluctuations, meticulously controlled through advanced power management, guaranteeing optimal performance in every test.
1. Cutting-edge Humidifier: Experience consistency and precision with our advanced humidification solutions.
Our innovative humidification system ensures unparalleled consistency, using a state-of-the-art humidification cylinder (boiler method) for exceptional uniformity. The surface humidification (water plate method) enhances the process with accelerated control precision, leaving no impurities like scale within the chamber. This system excels even at low humidity, with easy maintenance and cleaning. The high-quality humidification tube, featuring a seamless stainless steel casing, provides insulation resistance exceeding 50M Ω, and is equipped with a robust anti-dry burning controller, ensuring superior safety and reliability.
2. Maximizing Water Efficiency and Energy Conservation: Innovative solutions for sustainable operations.
Our system boasts a spacious 25L front-mounted water tank, ingeniously designed with an intuitive quick-connection mechanism for rapid water and electricity plug-in. This facilitates effortless disassembly and maintenance. Deliver precise dehumidification across three distinct humidity zones, optimizing water usage while adhering to stringent national standards for high-temperature and humidity conditions, such as 85ºC and 85% RH. With the point cooling and dehumidification system disabled, our innovative closed design drastically reduces water consumption, epitomizing sustainability and efficiency.
Choose Equipment that Surpasses the Most Rigorous Testing Conditions: Invest in quality for unmatched reliability.
1. Optimal Circulating Air Mode Selection: Courtyard Air Supply or Variable Speed Motor: Tailor your testing environment to perfection.
If your product demands precise wind speed control, this innovative solution is your perfect choice.
2. Optimal Water Supply System: RO Reverse Osmosis: Delivering unmatched purity and convenience.
Our automatic system streamlines the humidification process by providing pure, consistent water supply through an RO reverse osmosis system, saving valuable time and ensuring convenience.
3. Advanced Polymer Film/Rotor Dehumidification System: Cutting-edge technology for optimal performance.
If your testing demands stringent low-temperature and low-humidity conditions, our cutting-edge cellular chemical dehumidification system is your go-to choice, delivering exceptional performance with a humidity range of up to 10ºC/10% RH or even lower.
4. Elevate your Testing with Unmatched Support and Advanced Features. LN.Two/ .LCO.2: Experience the future of climate testing with sophisticated solutions.
We deliver a comprehensive array of professional-grade products, sourced directly from leading manufacturers in Europe and the United States. LN.Two/ .LCO.2: Cutting-edge technology for rigorous testing requirements.
Our sophisticated solenoid valves and integrated control systems are designed to meet your rapid testing needs for accelerated testing and temperature reduction with precision control.
5. Ultrasonic Cooling and Humidification System: Excellence in extreme testing environments.
For dynamic high heat load testing under extreme temperature and humidity, our ultrasonic cooling and humidification system is engineered to meet the most stringent requirements. This specialized system is equipped as an auxiliary device to ensure optimal performance, delivering consistency and reliability in every test.
6. Premium Glass Inner Door with Manual Operation Port: Ensuring ease of use and exceptional design.
For seamless and efficient operations that involve the frequent movement of test objects, we have introduced an innovative glass inner door. Equipped with a manual operation port (∧ 125Mm * Ea.), this feature significantly reduces environmental impact caused by repeated access to the chamber, ensuring that your testing conditions remain uninterrupted and optimal.
7. State-of-the-Art Real-Time Test Data Recorder: Experience the cutting-edge advancements in test data recording with our state-of-the-art solutions. This technology guarantees the accuracy and reliability of real-time data, elevating your testing processes to new heights.
When precise and comprehensive temperature measurements of both the testing environment and the test object are crucial, our certified recording solutions become indispensable. Our specialized tape recorder is meticulously designed to meet all your data acquisition needs with unrivaled precision, enhancing the accuracy of your results.
8. Cutting-Edge Computer Connectivity and Operation Recording Software: Elevate your testing experience with our cutting-edge computer connectivity and operation recording software. It seamlessly integrates with your systems, providing robust and efficient connectivity that ensures all aspects of your testing are meticulously documented and easily accessible.
Our custom connection software, crafted specifically for Mattel's environmental measuring machine kitchen, revolutionizes user convenience with its robust and powerful capabilities. It offers simultaneous multi-machine monitoring and seamless data access from active machines, delivering the ultimate in advanced electronic functionalities to users, enhancing productivity and efficiency.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}