Advanced High Low Temperature Humidity Chamber for Precision Climate Testing Equipment
Product Description
Unveil the unmatched superiority of Guangdong MENTEK Testing Equipment Co.,Ltd's Advanced Temperature Humidity Chamber. This state-of-the-art apparatus is masterfully crafted to seamlessly conduct both high and low temperature evaluations on a diverse array of electrical products, components, and materials. Embark on a journey to the pinnacle of environmental simulation and reliability testing, as it facilitates stable or differential temperature shifts and comprehensive humidity evaluations. Complying with premier Chinese national standards/T10586-2006 and T10592-2008, our humidity and heat test chambers epitomize precision, quality, and reliability, setting a new benchmark in the industry.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant standard test requirements
Safety test of monomer battery:The temperature cycle test is carried out according to the following steps
1.1 Monomer battery is charged according to the 6.1.3 method
1.2 The monomer battery is placed within the temperature chamber, which is precisely calibrated in accordance with Table 1 and Figure 2. This process undergoes 5 cycles, with a meticulous observation period of 1 hour.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 Temperature cycle test: The temperature and time specifications for a single cycle
Battery module safety test:The temperature cycle test is carried out according to the following steps
1.1.1 The battery module is charged according to the 6.1.4 method
1.1.2 The battery module temperature is meticulously placed in the temperature chamber, fine-tuned for 5 cycles as specified in Table 1 and Figure 2.Continuous observation is conducted for 1 hour.
The equipment meets the following industry-leading testing standards
Our equipment complies with these esteemed national standards: National Standard/T2423.1-2008 Test A for Low Temperature, National Standard/T4243.2-2008 Test B for High Temperature (Partial), National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat, Chinese National Standard/T2423.4-2008 Test Decibel for Change and Damp Heat, and China National Standard/T2423.34-2012 Test Z. These standards ensure a remarkable range of temperature and humidity combinations or other evaluations within the equipment's extraordinary performance spectrum.
Intricately designed structure of the testing chamber
Crafted with unparalleled precision, the exterior of the test box is forged from resilient galvanized color steel plate, ensuring exceptional durability and longevity.
The inner boxes exhibit outstanding craftsmanship with SUS304 stainless steel plates, ingeniously featuring adjustable hanging hole strips for precise test track positioning. Encased in a minimum of 10 cm of rigid polyurethane foam and glass wool, these insulation layers ensure optimal performance. The front doors, a marvel of engineering, are framed with high-quality electric wood chicken glass fiber board offering superior low-temperature insulation, further enhanced by silicone foam sealing strips that withstand a broad temperature range.
Efficient experimental space air circulation:
An ingeniously designed air supply system utilizes multi-blade aluminum wind turbines, resistant to extreme temperatures. Driven by robust motors, air is meticulously directed to the upper louvers and returns from the bottom, maintaining a deviation of less than 2 ºC across the -70~100 ºC range, internationally benchmarked at 10 points.
Advanced controller operating system
Our system incorporates an innovative, low-power (8W) temperature and humidity control device, providing exceptional precision in temperature regulation with accuracy achieving an impressive ± 3 ºC.
1. High-resolution display screen:
Step into a world of visual brilliance with our dazzling 7-inch TET true color LCD resistive touch screen, boasting a stunning resolution of up to 800 * 480. This captivating display ensures precision and clarity for all your testing operations.
2. Extensive Program Capacity: Unleash unprecedented capabilities with this extraordinary testing chamber, masterfully crafted to accommodate a vast spectrum of configurations, elevating your testing prowess to new heights.
Immerse yourself in the cutting-edge technology of this chamber, which remarkably supports up to 1000 programs and 1000 segments. Seamlessly manage up to 999 total and partial loops with ease. Enjoy the flexibility of 10 sets of program linking functions and the convenience of real-time temperature curve display for instant access and direct queries.
3. Expansive Data Storage Capacity: Delve into the vast storage possibilities offered by this chamber, perfectly designed to meet your comprehensive data management needs.
Effortlessly retrieve and transfer extensive historical data spanning an impressive 300 days of operation. Experience seamless data upload through network cable or direct transfer to our advanced controller, ensuring optimal data accessibility and management with unparalleled ease.
4. Seamless Connectivity: Elevate your efficiency and simplify your operations with our exceptional connectivity solutions, designed to integrate seamlessly and optimize your workflow.
Experience unparalleled ease with LAN standard Ethernet communication, supporting up to 16 devices through a single software setup. Effortlessly integrate the outflow interface into regional networks for remote control, featuring real-time monitoring and historical curve playback to enhance your user experience.
Sophisticated Heating and Humidification System: Delve into the intricacies of this ingeniously engineered system, optimized for peak performance and reliability.
Crafted with precision, the system features bare wire nickel chromium alloy electric heating tubes for low thermal inertia and minimal heating overshoot. Achieve high-precision fluctuations with meticulously controlled power, ensuring top-tier performance and excellence at every stage.
1. Cutting-edge Humidifier: Discover the ultimate in humidification technology, engineered for exceptional performance and precision.
Our state-of-the-art humidification system employs the advanced boiler method for unrivaled consistency and uniformity. Accelerate and enhance precision with surface humidification using the water plate method, eliminating impurities like scale. Experience outstanding low humidity performance, effortless maintenance, and cleaning, all protected by a robust anti-dry burning controller within a sleek stainless steel casing.
2. Maximizing Water Efficiency and Energy Conservation: Embark on a path towards sustainability, achieving unparalleled resource conservation and efficiency.
With a spacious 25L front-mounted water tank and quick-connection design, benefit from fast water and electricity plug-ins for easy disassembly and maintenance. Our innovative closed design significantly reduces water consumption, optimizing usage across three distinct humidity zones while meeting national standards for high-temperature and humidity conditions.
Choose equipment that transcends the most demanding testing conditions, providing unparalleled performance and reliability.
1. Optimal Circulating Air Mode Selection: Choose unrivaled efficiency with options like Courtyard Air Supply or Variable Speed Motor for your specific needs.
For precise wind speed control, this innovative solution offers strategic adaptability and precision, perfectly tailored to meet your product's unique requirements.
2. Optimal Water Supply System: Experience the superior purity and reliability of RO Reverse Osmosis, ensuring an unmatched water supply for your operations.
Our automatic system guarantees pure, consistent water supply through RO reverse osmosis, streamlining the humidification process. Save time while ensuring unmatched purity and superior performance.
3. Advanced Polymer Film/Rotor Dehumidification System: Explore sophisticated dehumidification solutions, meticulously tailored to your precise needs.
Our advanced cellular chemical dehumidification system excels in rigorous low-temperature and low-humidity scenarios, delivering exceptional performance and effortlessly meeting stringent specifications.
4. LN.Two/ .LCO.2 LN.Two/ .LCO.2
We proudly present a distinguished selection of professional-grade products, sourced directly from Europe's and the United States' renowned manufacturers. Experience the unparalleled quality and reliability of our exceptional offerings, meticulously crafted to satisfy your every need with precision and care. LN.Two/ .LCO.2
Our advanced solenoid valves and integrated control systems are expertly designed to fulfill your pressing testing needs, providing rapid testing cycles and temperature reduction with unmatched precision. Trust in our outstanding solutions to deliver the perfection and accuracy you require.
5. Ultrasonic Cooling and Humidification System: Enhance your testing capabilities in extreme conditions with our cutting-edge system, engineered to optimize performance and ensure exceptional reliability.
For demanding high heat load testing under stringent temperature and humidity conditions, our ultrasonic cooling and humidification system is crafted to surpass the most rigorous standards. As an auxiliary device, it ensures peak performance and reliability, preserving the integrity of your testing processes even in the most challenging environments.
6. Premium Glass Inner Door with Manual Operation Port: Enjoy convenience and safety with this premium feature, meticulously designed to enhance your overall user experience.
To ensure uninterrupted operations even when test objects need frequent relocation, our chamber includes a premium glass inner door with a practical manual operation port (∧ 125Mm * Ea.). This ingenious design reduces the environmental impact typically associated with repeated chamber access, maintaining the integrity of your testing conditions effortlessly.
7. State-of-the-Art Real-Time Test Data Recorder: Capture every nuance with our precise and advanced recording solutions, ensuring your data acquisition remains reliable and highly accurate.
When accurate temperature measurements of both the test environment and test object are paramount, our certified recording solutions stand as essential. The meticulously engineered tape recorder meets all your data acquisition needs, delivering unrivaled accuracy and ensuring confidence in every detail recorded.
8. Cutting-Edge Computer Connectivity and Operation Recording Software: Elevate your convenience and functionality with our customized software solutions, designed to transform your monitoring and data access experience.
Our bespoke connection software, designed exclusively for Mattel's environmental measuring machine kitchen, sets a new standard for convenience and functionality. It allows simultaneous monitoring of multiple machines, provides seamless data access from actively used machines, and offers users the most advanced electronic features available, ensuring a superior operational experience.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}