High Accuracy Battery Testing Impact Table for Reliable Performance Measurement Testing Device
Product Description
Embark on a journey into the realm of cutting-edge precision testing with our High Performance Temperature Humidity Chamber. This versatile masterpiece is meticulously crafted for conducting high and low-temperature tests across a vast spectrum of electrical products, components, and materials. MENTEK's environmental simulation reliability testing capabilities encompass constant gradient, sudden mutation, and wet heat testing. Proudly adhering to Chinese national standards/T10586-2006 and T10592-2008, these chambers guarantee exceptional accuracy and reliability, setting a new benchmark in precision testing.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: Dimensions can be precisely tailored to cater to your specific and bespoke requirements.
Relevant Standard Test Requirements
Our equipment meets stringent standards such as IEC62133-2012, UL1642, UN38.3, and 31241-2014.
Refer to Section 4.5 for sample guidelines. Utilizing the prescribed method, conduct the acceleration impact test post full charging. Execute this test in three mutually orthogonal directions sequentially. Detailed methodology can be found in Section 7.4.
Post-experiment, proceed with one discharge and charge cycle as per the method outlined in Section 4.5. Notably, the sample should not show any sign of ignition, explosion, or leakage.
Our premier equipment complies with the following comprehensive testing standards:
• National Standard/T2423.1-2008 Test A: Low Temperature • National Standard/T4243.2-2008 Test B: High Temperature (Partial) • National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat • Chinese National Standard/T2423.4-2008 Test: Change, Damp Heat • China National Standard/T2423.34-2012 Test Z/AnnoDominique: Temperature and humidity combination or other tests within equipment performance range.
Structure of the Testing Chamber
The testing chamber's robust exterior is constructed from galvanized color steel plates, ensuring its resilience and longevity.
The interior features SUS304 stainless steel, complete with side-mounted adjustable hanging hole strips and a versatile test track frame. Exceptional thermal insulation is provided by layers of rigid polyurethane foam and glass wool, each at least 10 cm thick. The interface between the inner and outer doors uses premium electric wood chicken glass fiber board frames, ensuring superior low-temperature insulation. The door's sealing strip, made from double-channel series silicone foam, offers outstanding resistance across wide temperature ranges.
Advanced Experimental Space Air Circulation:
Our sophisticated air supply system utilizes multi-blade aluminum wind turbines, adeptly engineered to endure temperature extremes. These turbines, powered by motors, facilitate efficient air delivery to the upper louvers, with a return flow from the bottom. This achieves an exceptional uniformity of less than 2 º C across the extensive range of -70~100 º C, establishing a precision benchmark recognized on a global scale.
Controller Operating System
By integrating a state-of-the-art low-power (8W) temperature and humidity control device, we ensure temperature precision control up to ± 3 º C, providing consistent and reliable performance throughout.
1. High Resolution Screen:
Indulge in crystal-clear visuals with a 7-inch TET true color LCD resistive touch screen, featuring an impressive resolution of 800 * 480.
2. High Program Capacity:
Boasting extensive memory capacity, our system supports 1000 programs/1000 segments, with 999 total loops and 999 partial loops. It offers 10 sets of program linking functions, accompanied by real-time temperature curve displays for on-the-spot query access.
3. High Data Storage Capacity:
Effortlessly handle 300 days' worth of historical data in storage operation mode by uploading directly to a hard disk or network cable, or seamlessly integrating it into the controller for streamlined data management.
4. Easy Connection:
Our state-of-the-art controller is equipped with LAN standard Ethernet communication, enabling seamless integration of up to 16 devices through a single software application. Effortlessly join regional networks using the machine's sophisticated outflow interface, facilitating remote program control. This includes the luxury of real-time monitoring and the ability to replay historical curves, ensuring comprehensive oversight and management.
Heating and Humidification System
Crafted with precision, our system features bare wire nickel chromium alloy electric heating tubes. These ensure minimal thermal inertia, exceptional precision, and reduced heating overshoot, culminating in flawless operation powered to peak performance.
1. Humidifier:
Experience unrivaled consistency with our innovative humidification system. Using a humidification cylinder via the advanced boiler method guarantees uniform results every time. For those prioritizing speed, our surface humidification (water plate method) offers rapid results with unmatched control precision, effectively eliminating impurities, including scale, within the chamber. This system is not only easy to maintain, but also boasts dyeing capabilities, superior low humidity performance, and a seamless stainless steel shell for the humidification tube. With an insulation resistance surpassing 50M Ω and an anti dry burning controller, safety is always a priority.
2. Optimizing Water Usage and Energy Efficiency:
Our innovative front-mounted, 25L high-capacity water tank incorporates a quick connection design, simplifying both water and electricity plugging for effortless disassembly and cleaning. Achieve precise dehumidification across three diverse humidity zones, considerably reducing water usage while complying with national standards for high temperature and humidity environments, such as 85 º C and 85% RH. When the point cooling and dehumidification system is inactive, the closed design significantly diminishes water consumption.
Invest in equipment specifically crafted to excel in the most extreme testing environments, ensuring reliability under any circumstance.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
When your product requires specific wind speed conditions, our expertly tailored solution stands as your ideal choice.
2. Select the Right Water Supply System: RO Reverse Osmosis
Designed for humidification, our equipment relies on pure water, supplied by an automatic water production system. This continuous supply of pure water not only saves time but also delivers exceptional convenience.
3. Advanced Polymer Film/Rotor Dehumidification System
For operations necessitating sustained low-temperature and low humidity testing, our sophisticated cellular chemical dehumidification system is indispensable. It achieves a remarkable humidity range of up to 10 º C/10% RH or even lower, catering to the most specific requirements.
4. LN.Two/ .LCO.2
Discover our comprehensive range of professional products, meticulously sourced from Europe and the United States, featuring complete specifications to meet all your needs. LN.Two/ .LCO.2
Our sophisticated solenoid valves coupled with integrated control systems are designed to meet your swift testing needs, facilitating rapid acceleration and efficient temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Our ultrasonic cooling and humidification system is engineered to excel in dynamic high heat load testing amid extreme temperature and humidity conditions, serving as a critical auxiliary system.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Facilitating frequent movement and operation of test subjects, incorporating manual operation through the glass inner door (∧ 125Mm * Ea.) effectively alleviates environmental impact from chamber door openings.
7. Real-Time Data Acquisition Recorder
For simultaneous recording of multiple temperature measurements from both the testing environment and the test object, our recorders adhere to industry standards. The tape recorder is your exclusive choice for precisely satisfying these specific requirements.
8. Advanced Computer Connection Operation Recording Software
b0c237e8
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}