Advanced Rapid Temperature Change Tester for Humid Testing Chamber Equipment
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber, a technological masterpiece in environmental simulation that combines both versatility and precision. This state-of-the-art chamber is meticulously crafted to perform high and low-temperature tests on a vast array of electrical components, products, parts, and materials. Whether your requirements involve constant, gradient, rapid temperature fluctuations, or moist heat assessments, MENTEK's advanced chambers are crafted to meet and exceed the rigorous Chinese national standards T10586-2006 and T10592-2008, delivering unmatched reliability and performance.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. External dimensions are expertly tailored based on the heating and cooling rate to ensure optimal performance.
2. Water cooling type: Functions optimally with water temperatures of 10~28 ºC and water pressure from 0.1~0.3 Mpa, maintaining peak cooling efficiency.
3. Enhance functionality with the integration of moisture and heat capabilities for superior performance.
4. Optional integration of a sophisticated dry air blowing system for enhanced operational versatility.
5. Optional liquid nitrogen function available for rapid cooling, achieving rates of up to 30 ºC/min.
6. The aforementioned specifications are standard, yet can be customized to meet detailed customer requirements, offering tailored solutions.
The equipment meets the following testing standards
Our cutting-edge testing equipment rigorously adheres to an extensive array of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Moreover, it fully complies with China National Standard/T2423.34-2012 Test Z/AnnoDominique, accommodating a wide spectrum of temperature and humidity scenarios within its extensive performance capabilities.
Structure of the testing chamber
The impressive structure of the testing chamber features an exterior crafted from premium galvanized color steel plate, ensuring exceptional durability and superior protection against the elements.
Inside, the chambers are masterfully constructed with SUS304 stainless steel plates featuring adaptable hanging hole strips for dynamic configurations. Each chamber includes a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are seamlessly connected using high-quality electric wood chicken glass fiber board frames, providing outstanding low-temperature insulation. The silicone foam door sealing strip, ingeniously designed with dual channels, offers remarkable temperature resistance, ensuring optimal thermal stability.
Experimental space air circulation:
Leveraging an advanced air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, driven by robust motors. These turbines expertly circulate air through upper louvers and return it from the bottom, maintaining a temperature uniformity of less than 2 ºC over a remarkable range of -70~100 ºC, evaluated at an international standard of 10 points for precision and reliability.
Controller operating system
Our system boasts a cutting-edge, low-power (8W) temperature and humidity control device, achieving exceptional accuracy with a temperature control precision of ±3 ºC, ensuring precise environmental conditions for testing.
1. High resolution screen:
Experience every detail with a 7-inch TET true-color LCD resistive touch screen, offering a striking resolution of up to 800 * 480 for crystal-clear visibility, enhancing user interaction.
2. High program capacity:
With its expansive memory, it can store an impressive 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays, facilitating easy queries and in-depth analysis.
3. High data storage capacity:
Conveniently transfer historical data spanning up to 300 days by uploading directly via hard disk or network cable to your computer, or seamlessly load it into the controller for uninterrupted access, ensuring data integrity and availability.
4. Easy connection:
Unleash the full potential of connectivity with our controller, masterfully equipped with a LAN standard Ethernet communication interface. Effortlessly manage up to 16 devices through our streamlined software platform. Its intuitive outflow interface facilitates seamless integration into regional networks, allowing for remote program control, real-time monitoring, and effortless historical curve replay functions. With this powerful tool, elevate your operational efficiency and maintain complete control from anywhere.
Heating and Humidification System
Harness the power of precision with our cutting-edge bare wire nickel-chromium alloy electric heating tubes, engineered to provide minimal thermal inertia while delivering outstanding accuracy in temperature control. Our sophisticated power controls masterfully reduce heating overshoot, ensuring optimal performance and reliability for all your needs.
1. Humidifier:
Unlock the future of environmental testing with our state-of-the-art humidification technology. Meticulously crafted using the dependable boiler method, our advanced humidification cylinder ensures uniform moisture distribution. For rapid and precise control, our surface humidification via the water plate method eliminates impurities such as scale effortlessly. Ideal for dyeing applications, it excels in low humidity conditions and promises effortless maintenance. Encased in a seamless stainless steel shell, our humidification tube boasts insulation resistance over 50M Ω and includes a robust anti-dry burning controller for enhanced safety. Experience unparalleled precision and reliability that sets a new standard in humidification.
2. Maximizing Water Efficiency and Energy Conservation:
Elevate your efficiency with our innovative front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for seamless water and power management. Enjoy hassle-free disassembly and cleaning for precision maintenance. Achieve precise dehumidification control across three distinct humidity zones, adhering to rigorous national standards for high temperature and humidity at 85 º C and 85% RH. Our advanced sealed design significantly minimizes water usage by deactivating the point cooling and dehumidification system, promoting sustainable operations and maximizing conservation.
Invest confidently in equipment engineered to thrive in the most challenging testing environments, delivering unparalleled reliability and peak performance that stands the test of time.
1. Selecting the Circulating Air Mode: Opt for Courtyard Air Supply or a Variable Speed Motor
For products with specific wind speed requirements, this customizable solution offers exceptional precision and adaptability. Ensure optimal performance finely tailored to your exact specifications, providing an unparalleled level of control and efficiency.
2. Selecting the Ideal Water Supply System: RO Reverse Osmosis
When precision is indispensable in humidification, our equipment guarantees an uninterrupted pure water supply through an automated production process, ensuring unmatched convenience and time efficiency to meet your highest standards.
3. Cutting-Edge Polymer Film/Rotor Dehumidification System
For critical long-term testing under rigorous low-temperature and low-humidity conditions, our sophisticated cellular chemical dehumidification system emerges as the ultimate solution. It accommodates an extensive humidity range down to 10 º C/10% RH or lower, meeting the most stringent requirements with superior precision and reliability.
4. LN.Two/ .LCO.2
We bring you elite professional products sourced directly from leading manufacturers across Europe and the United States, encompassing a comprehensive range of specifications to meet diverse needs and ensure unparalleled quality. LN.Two/ .LCO.2
Harness the power of our sophisticated solenoid valves and advanced control systems to meet your urgent testing needs for rapid thermal acceleration and precise temperature reduction, ensuring peak performance and unmatched reliability.
5. Revolutionary Ultrasonic Cooling and Humidification System
Our groundbreaking ultrasonic cooling and humidification system is expertly designed to tackle dynamic testing challenges associated with large heat loads in high temperature and humidity environments. Equip it as an auxiliary component to achieve peak performance in these demanding settings, ensuring unrivaled efficiency and effectiveness.
6. Integrate a Glass Inner Door and Enable Manual Operation Access
To reduce environmental impact during frequent testing or object movement, seamlessly incorporate manual operations through a glass inner door (∧ 125Mm * Ea.). This innovative design significantly minimizes disruptions from frequent door openings, enhancing the integrity and consistency of your tests, ensuring superior results.
7. Real-Time Test Data Collection Recorder
In scenarios where recording multiple temperature readings simultaneously is crucial, selecting a recorder that aligns with specification standards is essential. A tape recorder stands out as the most reliable choice, expertly fulfilling these exacting demands and ensuring precise temperature tracking to maintain the integrity of your data.
8. Computer Connection Operation Recording Software
Introducing our state-of-the-art connection software, meticulously crafted for Mattel's environmental measuring machine suite. This software empowers users with unparalleled capabilities, seamlessly bridging the gap between monitoring and operational efficiency. Experience effortless data extraction from diverse units and revel in the exceptional electronic functionalities that promise an intuitive, user-friendly interaction.
Structural Technology
1. The Company's Hardware Equipment:
Step into the future of manufacturing with our exclusive range of imported machinery from Germany and Taiwan, led by the cutting-edge AMADA AIRS.-255NT Punching system. Each piece, from carbon oxide to argon welding machines, embodies precision and ingenuity. Master the art of sheet metal design, disassembly, and virtual assembly with advanced Autodrsk Inventor 3D drawing software, defining the pinnacle of modern manufacturing excellence.
2. Engineered from top-tier galvanized steel, our shell's unmatched durability is further enhanced by a pioneering electrostatic powder spray baking paint finish, delivering lasting protection and an elegant aesthetic.
Three.. Skillfully crafted using premium imported SUS #304 stainless steel, the inner box is expertly fashioned through a full argon arc welding process, safeguarding against high-temperature and high-humidity air leakage. Its well-rounded corners facilitate efficient condensate drainage, boosting performance to new heights.
Revolutionary Refrigeration System Technology
Unleash the future of refrigeration system management with our cutting-edge 3D-optimized frequency conversion control technology, delivering precise and adaptable thermal regulation for superior performance.
Our innovative variable frequency refrigeration system, while consistently operating on a 50HZ power supply frequency, employs a frequency converter for intelligent compression speed adjustments. This smart alignment of cooling output with real-time test chamber demands boosts energy efficiency and facilitates rapid cooling for unmatched performance.
Experience the stability and minimal fluctuation of our variable frequency refrigeration system, which meticulously balances suction and exhaust pressures to enhance consistency and operational reliability.
Embrace the advantages of our energy-efficient refrigeration systems, featuring cutting-edge energy-saving innovations designed to revolutionize performance.
1. By integrating PID and PWM-driven VRF technology with electronic expansion valves, our systems achieve extraordinary low-temperature energy efficiency. This advanced thermal flow control, propelled by the PID + PWM integration, ensures meticulous refrigerant flow regulation, eliminating the need for auxiliary heating.
Our precise three-way flow adjustments across refrigeration, cold side, and heating side pipelines ensure automatic temperature constancy, excelling under low-temperature conditions. This method reduces energy consumption by 30% while optimizing performance.
Our technology, underpinned by the Danish Dan-foss Company's ETS System electronic expansion valve, dynamically modulates refrigeration capacity to accommodate varying cooling rates, optimizing compressor cooling capacity.
2. Boasting dual compressor group design technology, our systems automatically adjust to load conditions, ensuring peak efficiency through advanced series design.
The refrigeration unit configuration comprises a binary compound of semi-closed compressors paired with a fully dense single-stage system, intelligently adapting to load requirements for peak cooling capacity and prolonging compressor longevity.
Innovative Cold Circuit Technology
Our power distribution layout is executed with precision, adhering to technical department blueprints, and features globally recognized electrical component brands to ensure reliability and optimal performance.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly incorporate esteemed brands such as Omron, Sch-neider, and GermanyPhoenixTerminal block into our designs. Each line code is clearly marked to enhance user-friendliness and reliability. We selectively use only the most reputable Chinese brands to assure unmatched performance and durability.
Harnessing the legendary Pearl River Cable as our hallmark of ultimate excellence, we guarantee unparalleled wire quality and exceptional performance. Our meticulously crafted control lines, using a minimum gauge of 0.75 Square RV soft copper wire, ensure dynamic conductivity. Essential components like motor compressors are engineered with precision to meet EC standards. Carefully selected trap diameters assure adherence to cable groove safety currents. The machine's cable port is expertly sealed to proactively prevent frost-induced short circuits, safeguarding the terminal within the junction box.
Each terminal fixing screw within our system is precisely connected with a standard fixed torque, ensuring a swift and steadfast connection. This meticulous approach eliminates potential hazards like loose fires, enhancing safety and reliability.
Refrigeration Series Process: A Comprehensive and All-Encompassing Approach
1. Standardization: The Essential First Step Towards Exceptional Quality and Performance
1.1 As a shining example of our unwavering dedication to excellence and reliability, our high-quality steel pipe piping process, coupled with rigorous welding standards, exemplifies our commitment to superior craftsmanship.
By adhering rigorously to standardized pipe layouts, we ensure our model systems represent the pinnacle of stability and reliability.
1.2 Utilizing state-of-the-art Italian imported pipe bending machinery, we achieve flawless steel pipe bends. This advanced process significantly reduces welding points and minimizes oxide generation within the tubes, enhancing the system's overall reliability.
Ensuring Consistent System Reliability: Our Unwavering Commitment to Excellence
Sophisticated Shockproof Design with Robust Pipeline Support
2.1 At Meitec, we enforce stringent standards for supporting and shock prevention in refrigeration copper pipes. By adopting a comprehensive approach to seismic protection scenarios, including arc bends and specialized nylon-fixed clamping, we deter deformation and leakage from circular vibrations and temperature changes, thus bolstering the reliability of the entire refrigeration system.
Enhancing the Overall Trustworthiness of the Refrigeration System
2.2 Leading the Way with an Advanced Oxidation-Free Welding Process
It is widely recognized that the internal cleanliness of a refrigeration system's pipeline is critical to its performance and longevity. Metco employs a standardized charging welding procedure to prevent excessive oxide contamination during welding, ensuring optimal performance.
Through precise and methodical practices, Metco significantly enhances the refrigeration system's efficiency and prolongs its operational lifespan by minimizing oxide pollution during welding, optimizing overall reliability.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}