Premium High Low Temperature Humidity Chamber for Advanced Damp Heat Testing Solutions
Product Description
Discover the remarkable Advanced Humid Hot Testing Machine, a highly sophisticated device by Guangdong MENTEK Testing Equipment Co.,Ltd. This premium temperature humidity chamber is meticulously engineered to excel in both high and low temperature testing across a diverse range of electrical products, parts, and materials. Experience unparalleled environmental simulation and reliability testing, including constant or gradient temperature variations and wet heat assessments. Crafted to comply with Chinese national standards/T10586-2006 and T10592-2008, our state-of-the-art humidity and heat test chambers promise precision, unrivaled quality, and ultimate performance.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant standard test requirements
Safety test of monomer battery: The temperature cycle test is carried out according to the following steps
1. 1 Monomer battery is charged according to the specific guidelines outlined in the 6.1.3 method
1.2 The temperature of the monomer battery is meticulously regulated within the temperature chamber. The chamber's settings are finely tuned according to Table 1 and Figure 2, ensuring a comprehensive cycle conducted 5 times, with a precise observation period of 1 hour.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 Temperature cycle test The temperature and time of a cycle
Battery module safety test: The temperature cycle test is carried out according to the following steps
1.1.1 The battery module is charged according to the expertly crafted guidelines in the 6.1.4 method
1.1.2 The temperature of the battery module is placed in the chamber, undergoing strategic adjustments 5 times as specified in Table 1 and Figure 2. Observe thoroughly for a 1-hour duration
The equipment meets the following industry-leading testing standards
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat. Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat. China National Standard/T2423.34-2012 Test Z/AnnoDominique: Engage in comprehensive temperature and humidity combinations or other assessments within the equipment's performance spectrum.
Intricately designed structure of the testing chamber
Crafted with utmost precision, the outer shell of the test box is constructed from robust galvanized color steel plate.
The inner boxes exemplify superior craftsmanship with high-quality SUS304 stainless steel plates. Ingeniously included are adjustable hanging hole strips for uniform test track placement. Encased in a minimum of 10 cm of rigid polyurethane foam and glass wool, these thermal insulation layers ensure optimal performance. The front doors are a marvel of engineering, utilizing high-quality electric wood chicken glass fiber board frames for exceptional low-temperature insulation. This is complemented by silicone foam sealing strips that can withstand a wide temperature range.
Efficient experimental space air circulation:
A masterfully devised air supply system employs multi-blade aluminum wind turbines, impervious to high and low temperatures. Driven by powerful motors, air is efficiently channeled to the upper louvers and returns from the bottom, ensuring a deviation less than 2 ºC throughout the -70~100 ºC range, internationally benchmarked at 10 points.
Advanced controller operating system
Equipped with an innovative low-power (8W) temperature and humidity control device, ensuring exceptional precision in temperature control with an accuracy reaching an impressive ± 3 ºC.
1. High-resolution display screen:
A stunning 7-inch TET true color LCD resistive touch screen with a breathtaking resolution of up to 800 * 480, providing clarity and detail like never before.
2. Extensive program capacity:
Experience unparalleled convenience and efficiency with our Premium Temperature Humidity Chamber, designed to cater to advanced testing applications. Revel in an impressive memory capacity that accommodates 1000 programs and 1000 segments, alongside 999 total loops and 999 partial loops-effortlessly tackle even the most complex testing scenarios. Seamlessly link up to 10 sets of programs, all while enjoying the ease of direct access to real-time temperature curve displays for instant data queries.
3. Expansive Data Storage Capacity: Unlock the full potential of our sophisticated storage system.
Effortlessly manage and transfer historical data with our system, which boasts a storage operation capacity of up to 300 days. Easily upload your precious data to a computer through a network cable or directly load it into the controller, ensuring seamless data management and accessibility.
4. Seamless Connectivity: Experience unmatched integration and connectivity prowess.
Harness the power of LAN standard Ethernet communication to effortlessly connect the controller to your network. Handle up to 16 devices with a single software interface, facilitating seamless integration into regional networks. Unlock the potential for remote program control with advanced features such as real-time monitoring and historical curve playback, ensuring complete oversight and control.
Sophisticated Heating and Humidification System: Elevate your testing protocols with precision-engineered components.
Meticulously crafted with precision and expertise, our heating system incorporates bare wire nickel chromium alloy electric heating tubes. These elements are engineered to deliver low thermal inertia and minimal heating overshoot, allowing for high-precision fluctuations with carefully regulated power. Trust in our advanced system to provide consistent and reliable results.
1. Cutting-edge Humidifier: Achieve superior humidification consistency with our state-of-the-art system.
Experience unparalleled humidification uniformity with our cutting-edge system, featuring a state-of-the-art humidification cylinder (boiler method) that ensures exceptional consistency. The surface humidification (water plate method) accelerates the process, enhancing control precision and eliminating impurities like scale. Our system excels even in low humidity, offering effortless maintenance and cleaning. The high-quality humidification tube boasts a seamless stainless steel casing, insulation resistance exceeding 50M Ω, and an anti-dry burning controller for unparalleled safety.
2. Maximizing Water Efficiency and Energy Conservation: Conserve resources while optimizing performance.
Our system is designed with a spacious 25L front-mounted water tank, complete with an intuitive quick-connection design for efficient plug-in of water and electricity. This facilitates easy disassembly and maintenance. Enjoy precise dehumidification across three distinct humidity zones, optimizing water usage while adhering to national standards for high-temperature and humidity conditions like 85ºC and 85% RH. With the point cooling and dehumidification system disabled, our innovative closed design significantly reduces water consumption, championing sustainability.
Choose equipment that excels under the most rigorous testing conditions: Trust our advanced systems to meet and exceed your expectations.
1. Optimal Circulating Air Mode Selection: Courtyard Air Supply or Variable Speed Motor-Choose the ideal solution for your specific testing needs.
For products that demand precise control of wind speed, our innovative solution provides the perfect choice, offering unmatched precision and reliability.
2. Optimal Water Supply System: RO Reverse Osmosis-Ensure purity and consistency in your testing processes.
Our automatic system revolutionizes the humidification process by delivering pure, consistent water supply through an RO reverse osmosis system. Save valuable time and enjoy unmatched convenience with our streamlined approach.
3. Advanced Polymer Film/Rotor Dehumidification System: Achieve stringent low-temperature and low-humidity conditions with ease.
If your testing demands require stringent low-temperature and low-humidity conditions, our cutting-edge cellular chemical dehumidification system is your perfect choice. Experience exceptional performance with a humidity range as low as 10ºC/10% RH, ensuring precise and reliable results.
4. LN.Two/ .LCO.2: A comprehensive array of solutions for diversified applications. LN.Two/ .LCO.2: Experience unparalleled quality with our products sourced from top manufacturers.
We offer a comprehensive array of professional-grade products, sourced directly from leading manufacturers in Europe and the United States. Trust in our quality and expertise to meet your demanding requirements. LN.Two/ .LCO.2: Fine-tuned for precise control and rapid testing.
Our sophisticated solenoid valves and integrated control systems are meticulously designed to meet your rapid testing needs, offering accelerated testing and precise temperature reduction with unmatched control.
5. Ultrasonic Cooling and Humidification System: Master dynamic high heat load testing with confidence.
For extreme temperature and humidity testing under dynamic high heat loads, our ultrasonic cooling and humidification system is expertly engineered to meet the most stringent requirements. As an auxiliary device, it ensures optimal performance and reliability in challenging conditions.
6. Premium Glass Inner Door with Manual Operation Port: Enhance accessibility and visibility with elegance.
Ensure flawless operations during frequent handling of test objects with our ingeniously designed glass inner door. Featuring a manual operation port (∧ 125Mm * Ea.), it significantly reduces the environmental disruptions typically encountered with repetitive chamber access, guaranteeing continuous and consistent testing conditions.
7. State-of-the-Art Real-Time Test Data Recorder
For those requiring meticulous temperature data of both the ambient testing environment and the test object, our certified recording solutions are simply indispensable. Our specialized tape recorder is masterfully engineered to meet every aspect of your data acquisition needs with utmost accuracy and reliability.
8. Cutting-Edge Computer Connectivity and Operation Recording Software
Introducing our bespoke connection software, meticulously designed for Mattel's environmental measuring machine kitchen. This revolutionary tool redefines convenience with its robust capabilities, enabling simultaneous multi-machine monitoring, effortless data retrieval from live machines, and offering the most sophisticated electronic features available to users.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}