Quick Temperature Change Humidity Environmental Testing Chamber Test Equipment Rapid Climate Tester
Product Description
1. The humidity control function can be selected. The temperature rise and fall rate is adjustable. Maximum rate can reach 20ºC/min, auxiliary liquid nitrogen refrigeration can reach 30ºC/min;
2. Equipped with a frequency converter, the wind speed can be adjusted. It can be set to reduce in a constant state. Wind speed; Optional dry air blowing system. Prevent condensation in the box and samples frost;
3. Cold output energy-saving design, recognized by third-party testing institutions. In the major refrigeration department. Unified middle school. The energy-saving effect is very significant.
Main Parameters
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC) - 70+150ºC(-55+80ºC) |
| Temperature fluctuation |
±0.3ºC±0.5ºC |
| Temperature deviation |
± |
| Humidity deviation |
±3%RH(<75%RH)±5%RH (≤75%RH) |
| Heating and cooling rate |
5/10/15/20ºC/min |
| Standard load (aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window (mm) |
300*400/400*600 |
| Test hole (mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size (cm) |
Width |
70 |
80 |
100 |
130 |
| Height |
80 |
90 |
100 |
115 |
| Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V 50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are determined according to the heating and cooling rate
2. Water cooling type (water temperature 10~28ºC, water pressure 0.1~0.3Mpa to ensure cooling performance)
3. Can increase the function of dampness and heat
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30ºC/min)
6. The above loads are standard loads and can be designed according to customer requirements.
Innovative Cutting-Edge Structural Technology
1. Premier Hardware Equipment of Our Company:
Explore our elite range of machinery imported from Germany and Taiwan, showcasing the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding machines, each model exemplifies superior precision and groundbreaking innovation. Master a variety of Autodesk Inventor 3D drawing software applications designed for sheet metal design, virtual assembly, and disassembly-truly redefining the benchmark of modern manufacturing excellence.
2. Constructed from premium galvanized steel, the shell offers exceptional durability, further accentuated by a sophisticated electrostatic powder spray baking paint finish. This enhances both its protective qualities and its elegant visual appeal.
Three.. Expertly crafted with imported SUS #304 stainless steel, the inner box employs a complete argon arc welding process to avert high-temperature and high-humidity air leakage. Its rounded corners facilitate efficient condensate drainage, thereby enhancing overall performance.
Revolutionary System of Refrigeration Technology
Our 3D-optimized refrigeration system management, utilizing cutting-edge frequency conversion control technology, provides precise and flexible thermal regulation. This ensures exceptional adaptability and unparalleled performance.
Within our advanced variable frequency refrigeration system, even with a steady power supply frequency of 50HZ, the frequency converter dynamically calibrates the compression speed. It adapts cooling output to the real-time load of the test chamber, adjusting the compressor frequency as chamber temperatures fluctuate, thereby enhancing energy efficiency and ensuring rapid cooling for superior results.
Experience unparalleled stability with our test chamber's variable frequency refrigeration system, which maintains a consistent temperature environment with minimal deviations. This sophisticated system ensures balanced suction and exhaust pressures, optimizing operational consistency for top-tier performance.
Reap the benefits of our energy-efficient refrigeration system technology, paired with state-of-the-art energy-saving innovations. Designed to maximize performance while minimizing resource consumption, this technology sets new standards in efficiency.
1. Leverage the power of PID and PWM-driven VRF technology, making use of electronic expansion valves for optimal thermal flow control. Achieve energy efficiency even in low-temperature conditions with PID + PWM systems that enhance refrigerant flow regulation, ensuring effective operation without the need for auxiliary heating.
With precise three-way flow adjustments of refrigeration, the cold side, and heating side pipelines, automatic temperature maintenance is achieved. This method excels in optimizing performance under low-temperature conditions, reducing energy consumption by 30% and significantly improving overall efficiency.
Our technology, harnessing the Danish Dan-foss Company's ETS System electronic expansion valve, allows for dynamic adjustments in refrigeration capacity. It adapts to varying cooling rates, optimizing compressor efficiency for superior cooling performance.
2. Utilizing a dual compressor group design technology, automatic start-stop functionality is matched to load conditions to optimize efficiency. This is made possible through our innovative and advanced series design.
The refrigeration unit incorporates a binary compound of semi-closed compressors and a fully dense single-stage system. It adapts intelligently to load requirements, ensuring optimal cooling capacity and prolonging compressor lifespan.
Innovative Advanced Cold Circuit Technology
The power distribution layout is meticulously executed according to blueprints provided by our technical department, incorporating globally recognized electrical component brands to ensure unmatched reliability.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate distinguished brands like Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is clearly marked for ease of use and reliability. We exclusively choose the most reputable Chinese brands to guarantee superior performance and durability.
Experience the excellence of Pearl River Cable, our esteemed and trusted brand that guarantees unparalleled wire quality and exceptional performance. Our meticulously crafted control lines utilize a superior selection of 0.75 Square RV soft copper wire, renowned for its robust conductivity and efficient performance. Key load components, such as motor compressors, are engineered to meet the rigorous EC standards. The carefully considered trap diameters ensure adherence to the cable groove wiring safety current standards. Moreover, the machine's cable port is expertly sealed to prevent frost-induced short circuits, safeguarding the terminal within the junction box from potential harm.
Every terminal fixing screw is meticulously connected using a standard fixed torque, providing secure and rapid connections while significantly reducing risks, such as loose fires. This detailed precision and dedication to quality markedly enhance safety and reliability.
Refrigeration Series Process: A Holistic and Thorough Approach
1. Standardization: Paving the Path to Superior Excellence
1.1 Our outstanding steel pipe piping process, complemented by rigorous welding standards, demonstrates our unwavering dedication to delivering excellence and unbeatable reliability.
By meticulously adhering to standard pipe layouts, we guarantee the unwavering stability and dependable reliability of our model systems.
1.2 Utilizing state-of-the-art Italian imported pipe bending machinery, we achieve flawless steel pipe bends. This advanced process significantly reduces the need for weld points and minimizes the generation of oxides within the tubes during welding, thereby enhancing overall system reliability.
Prioritizing System Reliability Above All Else
Innovative Shockproof Design and Durable Pipeline Support
2.1 At MENTEK, we implement stringent standards for the support and shock prevention of refrigeration copper pipes. By thoroughly assessing potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping to prevent deformation and leakage caused by cyclic vibration and temperature variations, thus enhancing overall system reliability.
Boosting Reliability Across the Entire Refrigeration System
2.2 Cutting-Edge Oxidation-Free Welding Process
The cleanliness of a refrigeration system's pipeline is crucial to its optimal efficiency and longevity. MENTEK employs a standardized charging welding procedure to prevent excessive oxide contamination during the welding process, ensuring the system operates at its peak performance.
Through our meticulous practices, MENTEK significantly boosts the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide contamination during welding, thereby maximizing reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}