Quick Climate Humidity Temperature Testing Chamber for Accurate Climatic Conditions in Guangdong
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber, a marvel in environmental simulation crafted with versatility and precision in mind. This state-of-the-art chamber is engineered to perform high and low-temperature tests on a broad spectrum of electrical components, diverse products, parts, and materials. Whether your testing needs are for constant, gradient, rapid fluctuation temperatures, or wet heat assessments, MENTEK's advanced chambers are meticulously designed to meet and exceed Chinese national standards T10586-2006 and T10592-2008, ensuring unmatched reliability and performance.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are determined according to the heating and cooling rate
2. Water cooling type (water temperature 10~28 ºC, water pressure 0.1~0.3Mpa to ensure cooling performance)
3. Can increase the function of dampness and heat
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30 ºC/min)
6. The above loads are standard loads and can be designed according to customer requirements.
The equipment meets the following testing standards
Our cutting-edge testing equipment strictly adheres to an array of rigorous standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Notably, it also complies with the China National Standard/T2423.34-2012 Test Z/AnnoDominique, thereby supporting a vast array of temperature and humidity scenarios within its comprehensive performance capabilities.
Structure of the testing chamber
The formidable structure of the testing chamber features an outer shell fashioned from premium galvanized color steel plate, ensuring durability and superior protection.
Internally, the chambers boast SUS304 stainless steel plates with adaptable hanging hole strips for dynamic configurations. Each chamber is outfitted with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are securely linked using high-quality electric wood chicken glass fiber board frames, providing exceptional low-temperature insulation. The silicone foam door sealing strip, designed with dual channels, showcases remarkable temperature resistance.
Experimental space air circulation:
Harnessing a sophisticated air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, driven by motors. These turbines deftly circulate air through upper louvers and return it from the bottom, preserving a temperature uniformity of less than 2 ºC over an impressive range of -70~100 ºC, evaluated at an international standard of 10 points.
Controller operating system
The system is integrated with a leading-edge, low-power (8W) temperature and humidity control device, achieving remarkable accuracy with a temperature control precision of ±3 ºC.
1. High resolution screen:
Immerse yourself in vivid detail with a 7-inch TET true-color LCD resistive touch screen, offering an impressive resolution of up to 800 * 480 for crystal-clear visibility.
2. High program capacity:
Boasting a vast memory, it can store an impressive 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays for effortless queries and analysis.
3. High data storage capacity:
Seamlessly transfer historical data spanning up to 300 days by uploading directly via hard disk or network cable to your computer, or effortlessly load it into the controller for continuous access.
4. Seamless Connectivity:
Effortlessly maintain control with our advanced controller, equipped with LAN standard Ethernet communication. Manage up to 16 devices seamlessly through a singular software platform, while the outflow interface facilitates smooth integration into local networks. Enjoy remote program management, real-time monitoring, and easy access to historical data with extreme convenience.
Heating and Moisture Control System
Experience a leap in heating efficiency with our innovative bare wire nickel-chromium alloy electric heating tubes. These tubes are designed for low thermal inertia and minimal heating overshoot, ensuring remarkable precision in temperature fluctuations. Supported by advanced power controls, this system delivers optimal heating performance for your testing needs.
1. Advanced Humidification System:
Revolutionize your testing experience with our state-of-the-art humidification technology. Our cutting-edge humidification cylinder, utilizing the trusted boiler method, guarantees superior moisture uniformity. For those demanding rapid and precise control, our water plate surface humidification offers unparalleled speed and accuracy, effortlessly removing impurities like scale. Tailored for dyeing applications, it excels in low humidity conditions, ensuring easy maintenance. Crafted from seamless stainless steel, our humidification tube boasts insulation resistance exceeding 50M Ω, coupled with a robust anti-dry burning controller to enhance safety.
2. Water Efficiency and Energy Conservation Maximized:
Discover the convenience of our front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for efficient water and power management. Experience easy disassembly and cleaning to maintain precision. Achieve precise dehumidification control across three distinct humidity zones, meeting strict national standards for high temperature and humidity scenarios at 85 º C and 85% RH. Our advanced sealed design, which disables point cooling and dehumidification systems, significantly reduces water consumption, promoting sustainable operation.
Invest in equipment engineered for the toughest testing environments, promising unmatched reliability and superior performance.
1. Choose the Circulating Air Mode: Select Courtyard Air Supply or Variable Speed Motor
For products needing specific wind conditions, this customizable solution offers precision and adaptability, guaranteeing optimal performance.
2. Optimal Water Supply System: RO Reverse Osmosis
When precision humidification is essential, our equipment guarantees a continuous supply of pure water via an automated production process, providing maximum convenience and time efficiency.
3. Advanced Polymer Film/Rotor Dehumidification System
For stringent long-term testing in low-temperature and low-humidity environments, our sophisticated cellular chemical dehumidification system is your definitive solution. It accommodates a broad humidity range down to 10 º C/10% RH or lower, meeting the most stringent requirements.
4. LN.Two/ .LCO.2
We offer premier professional products with a comprehensive range of specifications, sourced directly from esteemed manufacturers in Europe and the United States. LN.Two/ .LCO.2
Utilize our solenoid valves and advanced control systems to meet your urgent testing demands with rapid thermal acceleration and precise temperature reduction.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
For dynamic testing of large heat loads in high temperature and humidity conditions, our revolutionary ultrasonic cooling and humidification system is engineered to conquer these challenges. Use it as an auxiliary component to achieve optimal performance.
6. Integrate a Glass Inner Door for Manual Operation Access
To reduce environmental impact during frequent testing or object movement, incorporate manual operations through a glass inner door (∧ 125Mm * Ea.). This innovative design significantly reduces disruptions from frequent door openings, enhancing testing integrity.
7. Real-Time Test Data Collection and Recording
In scenarios where precision and reliability are paramount, our tape recorder stands unrivaled. For simultaneous recording of multiple temperature measurements, it is engineered to meet and exceed stringent specification standards, ensuring your operations are always in expert hands.
8. Advanced Computer Connection Operation Recording Software
Specially crafted for Mattel's environmental measuring machine suite, our cutting-edge connection software offers users enhanced functionalities. Experience seamless multi-machine monitoring, efficient data retrieval from operational units, and superior electronic features that simplify usability like never before.
Innovative Structural Technology
1. Our Company's Premier Hardware Equipment:
Discover our sophisticated lineup of German and Taiwan imported machinery, featuring the AMADA AIRS.-255NT Punching system. From carbon oxide to argon welding machines, each model exemplifies precision and innovation. Master multiple Autodesk Inventor 3D drawing software applications for sheet metal design, virtual assembly, and disassembly-redefining modern manufacturing excellence.
2. Crafted from high-quality galvanized steel, the shell boasts remarkable durability, further enhanced with an advanced electrostatic powder spray baking paint finish. This ensures enduring protection and a refined aesthetic appeal.
Three.. Meticulously engineered with imported SUS #304 stainless steel, the inner box features a full argon arc welding process designed to prevent high-temperature and high-humidity air leakage. Its rounded corners promote efficient condensate drainage, thereby optimizing performance.
Revolutionary Refrigeration System Technology
Our 3D-optimized refrigeration system management, featuring state-of-the-art frequency conversion control technology, offers precise and flexible thermal regulation-ensuring unparalleled adaptability.
Within our variable frequency refrigeration system, even with a consistent power supply frequency of 50HZ, the frequency converter smartly adjusts compression speed. It tailors cooling output to real-time test chamber loads, dynamically adjusting compressor frequency as chamber temperatures change, enhancing energy efficiency and ensuring rapid cooling for exceptional performance.
Experience the impeccable stability of our test chamber's variable frequency refrigeration system, maintaining a consistent temperature environment with minimal fluctuations. This system ensures balanced suction and exhaust pressures, optimizing operational consistency for top-tier performance.
Benefit from energy-efficient refrigeration system technology coupled with cutting-edge energy-saving innovations, designed to maximize performance while minimizing resource consumption.
1. Harness the power of PID and PWM-driven VRF technology, utilizing electronic expansion valves for optimal thermal flow control. Achieve low-temperature energy efficiency with PID + PWM systems enhancing refrigerant flow regulation, ensuring effective operation without auxiliary heating.
With precise three-way flow adjustment of refrigeration, the cold side, and heating side pipelines, achieve automatic temperature constancy. This method excels in maintaining optimal performance under low-temperature conditions, slashing energy consumption by 30% and optimizing overall efficiency.
Our technology, leveraging the Danish Dan-foss Company's ETS System electronic expansion valve, provides dynamic refrigeration capacity adjustments. It adapts to diverse cooling rates, optimizing compressor cooling capacity for superior efficiency.
2. Employing a dual compressor group design technology, automatic start-stop functionality aligns with load conditions to optimize efficiency, made possible through our advanced series design.
The refrigeration unit features a binary compound of semi-closed compressors and a fully dense single-stage system. It intelligently adjusts based on load requirements, ensuring optimal cooling capacity and extending compressor longevity.
Innovative Cold Circuit Technology
Power distribution layout is expertly executed according to technical department blueprints, utilizing globally recognized electrical component brands for unsurpassed reliability.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate time-honored brands like Omron, Sch-neider, and Germany Phoenix Terminal block into our designs. Each line code is clearly marked for easy use and reliability. We select only the most reputable Chinese brands to ensure top-notch performance and durability.
Select the illustrious Pearl River Cable as our trusted brand, ensuring unparalleled wire quality and exceptional performance. Our control lines boast a minimum selection of 0.75 Square RV soft copper wire, offering robust and efficient conductivity. Key load components, including motor compressors, are crafted to meet the stringent EC standards, with trap diameters carefully chosen to adhere to cable groove wiring safety current standards. The cable port of the machine is masterfully sealed, preventing frost-induced short circuits and thus protecting the terminal within the junction box from potential harm.
Every terminal fixing screw is fastidiously connected using a standard fixed torque, ensuring secure and swift connections while mitigating potential risks such as loose fires. This meticulous attention to detail significantly boosts safety and reliability.
Refrigeration Series Process: A Holistic and Thorough Approach
1. Standardization: Paving the Path to Superior Excellence
1.1 Our exemplary steel pipe piping process, coupled with rigorous welding standards, underscores our unwavering dedication to excellence and unparalleled reliability.
By diligently adhering to standard pipe layouts, we assure the unwavering stability and dependable reliability of our model systems.
1.2 Through the use of cutting-edge Italian imported pipe bending machinery, we achieve seamless steel pipe bends. This advanced process dramatically reduces the need for welding points and minimizes oxide generation within the tubes during welding, thereby bolstering overall system reliability.
Prioritizing System Reliability Above All Else
Innovative Shockproof Design and Durable Pipeline Support
2.1 At Meitec, we enforce rigorous standards for the support and shock prevention of refrigeration copper pipes. By thoroughly considering potential seismic scenarios, we integrate arc bends and specialized nylon fixed clamping to guard against deformation and leakage caused by circular vibration and temperature changes, thereby enhancing the overall reliability of the refrigeration system.
Boosting Reliability Across the Entire Refrigeration System
2.2 Cutting-Edge Oxidation-Free Welding Process
It is widely recognized that the cleanliness of a refrigeration system's pipeline is crucial to its efficiency and longevity. Metco employs a standardized charging welding procedure to avert excessive oxide contamination during the welding process, thereby ensuring peak performance.
Through painstaking practices, Metco enhances the refrigeration system's efficiency and extends its operational lifespan by minimizing oxide pollution during welding, thus maximizing reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}