Advanced M Series Electronics Tester for 3c Vibration Testing System
Product Description
Introducing the unparalleled Guangdong Humid Testing Chamber by Guangdong MENTEK Testing Equipment Co., Ltd, a true marvel in the realm of environmental simulations, crafted with the utmost versatility and precision. This state-of-the-art chamber is meticulously engineered to execute a spectrum of high and low-temperature tests across a vast array of electrical components, diverse products, parts, and materials. Whether your testing requirements involve constant, gradient, rapid fluctuation temperatures, or wet heat assessments, MENTEK's advanced chambers are designed to not only meet but to exceed the esteemed Chinese national standards T10586-2006 and T10592-2008. This ensures a level of reliability and performance that is truly unmatched, setting a benchmark in the industry.
| M-series vibration testing system |
| Technical parameters of 2 tons vibration table body |
| Sinusoidal thrust |
2200kgf |
N×M Allowable partial load moment |
>500 |
| Random thrust |
2200kgf |
Equivalent mass of moving parts |
22kg |
| (6ms) Impact thrust |
4400kgf |
Load connection point |
16 connections |
| Frequency range |
DC-3,000Hz |
(Countertop screw size (standard) |
M10 |
| Continuous displacement |
51mm |
Tablet screw layout (diameter, circumference) |
8*120mm; 8*250mm |
| Impact displacement |
51mm |
Axial vibration isolation frequency |
<3Hz |
| Maximum speed |
2m/s |
Maximum load |
300kg |
| Maximum acceleration |
981m/s |
Magnetic flux leakage |
≤1mT |
| Moving circle diameter |
320mm |
(L×W×H) Size (no packaging) |
1189*780*1080mm |
| First order resonant frequency |
2600Hz |
Shaking table weight (no package) |
1650kg |
| Technical parameters of power amplifier |
Technical parameters of fan |
| Maximum output power |
20KVA |
Fan power |
7.5kW |
| Signal to noise ratio |
>65dB |
Air volume |
0.68m/s |
| Rated output voltage |
120Vrms |
Wind pressure |
0.059kgf/cm |
| Amplifier efficiency |
>92% |
Duct diameter |
200mm |
| System protection |
| |
Featuring multiple performance protections |
|
(L×W×H) Size (no packaging) |
950*794*1700mm |
| (L×W×H) Size (no packaging) |
550*800*1850mm |
Weight (no packaging) |
230kg |
| Amplifier weight (without packaging) |
500kg |
|
|
| System working environment requirements |
Purchase configuration |
| Temperature |
0-40ºC |
Sliding table |
Vertical expansion of the table |
| Humidity |
0-90% |
Mobile device |
Insulation board |
| Power requirements |
3AC, 380V±10%, 50Hz, 40KVA |
Power amplifier remote control |
Fixture |
| Compressed air requirements |
0.6Mpa |
Note:
1. The chamber's external dimensions are precisely determined by the heating and cooling rate, ensuring adaptability to varied testing scenarios.
2. Features a highly efficient water cooling type system, with water temperature ranging from 10~28 ºC and a water pressure of 0.1~0.3Mpa, ensuring optimal cooling performance and energy efficiency.
3. The chamber can be enhanced with the function of dampness and heat for added versatility, accommodating a wider range of testing conditions.
4. An optional dry air blowing system is available for customized needs, offering tailored solutions to specific testing requirements.
5. Includes an optional liquid nitrogen function capable of achieving an impressive 30 ºC/min for rapid cooling, catering to urgent testing demands.
6. All listed loads are standard, but the chamber can be custom-designed according to specific customer requirements, ensuring personalized and precise testing solutions.
The equipment meets the following testing standards
Our avant-garde testing equipment by Guangdong MENTEK rigorously adheres to a comprehensive array of standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. It is noteworthy that it also complies with China National Standard/T2423.34-2012 Test Z/AnnoDominique, thereby supporting a broad spectrum of temperature and humidity scenarios within its extraordinary performance capabilities, assuring consistency and excellence in testing outcomes.
Structure of the testing chamber
The testing chamber's formidable structure showcases an outer shell crafted from premium galvanized color steel plate, offering exceptional durability and protection against environmental impacts.
Internally, the chambers are lined with SUS304 stainless steel plates featuring adaptable hanging hole strips for flexible configurations. Each chamber is equipped with a test track frame, insulated by a robust 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are seamlessly connected using high-quality electric wood chicken glass fiber board frames, delivering superior low-temperature insulation. The silicone foam door sealing strip, ingeniously designed with dual channels, exhibits outstanding temperature resistance, ensuring efficiency and performance throughout the testing process.
Experimental space air circulation:
Our chamber boasts a sophisticated air supply system, empowered by high and low-temperature resistant multi-blade aluminum wind turbines. Driven by robust motors, these turbines expertly circulate air through upper louvers, returning it from the bottom. Experience unparalleled temperature uniformity, maintaining less than 2 ºC variance over an impressive range of -70~100 ºC. This system is evaluated with an international standard of 10 points, ensuring consistent and reliable test results you can trust.
Controller Operating System
Integrating a state-of-the-art, low-power (8W) temperature and humidity control device, our system achieves remarkable precision, boasting a temperature control accuracy of ±3 ºC. This empowers users with exceptional command and stability throughout their operations, ensuring optimal performance and reliability.
1. High-Resolution Screen:
Immerse yourself in vivid detail with a 7-inch TET true-color LCD resistive touch screen. With a striking resolution of up to 800 * 480, this screen ensures crystal-clear visibility, enhancing ease of use and delivering an unparalleled user experience.
2. High Program Capacity:
Armed with expansive memory, our system stores an impressive 1000 programs, each with 1000 segments. It supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays. Effortless queries and analysis empower operational efficiency and superior data management.
3. High Data Storage Capacity:
Effortlessly access and transfer a wealth of historical data spanning up to 300 days! Choose the straightforward method of uploading directly via hard disk or network cable to your computer, or seamlessly load it directly into the controller. Enjoy uninterrupted access and integration with our advanced systems for an efficient workflow.
4. Seamless Connectivity:
Effortlessly maintain supreme control with our cutting-edge controller featuring LAN-standard Ethernet communication. Seamlessly manage up to 16 devices from one software platform. Our outflow interface ensures smooth integration into local networks, empowering you with remote program management, real-time monitoring, and hassle-free access to historical data, ensuring streamlined operations.
Heating and Moisture Control System
Transform your heating efficiency with our innovative bare wire nickel-chromium alloy electric heating tubes, expertly engineered for low thermal inertia and impeccable temperature control. These tubes minimize heating overshoot, delivering extraordinary precision in temperature management. Paired with cutting-edge power controls, our system guarantees optimal heating performance tailored to your testing essentials.
1. Advanced Humidification System:
Elevate your testing with our pioneering humidification technology. Our advanced humidification cylinder employs the tried-and-true boiler method, ensuring unmatched moisture uniformity. For fast, precise control, our water plate surface humidification delivers unrivaled speed and precision, effortlessly removing impurities like scale. Especially effective in low humidity dyeing applications, it offers hassle-free maintenance. Constructed from seamless stainless steel, our humidification tube boasts insulation resistance exceeding 50M Ω, and a robust anti-dry burning controller for heightened safety.
2. Water Efficiency and Energy Conservation Maximized:
Discover our innovative front-mounted 25L capacity water tank, ingeniously designed with a quick-connect system for seamless water and power management. Enjoy easy disassembly and cleaning to ensure precision. Achieve meticulous dehumidification control across three distinct humidity zones, meeting rigorous national standards for high temperature and humidity conditions at 85 º C and 85% RH. Our advanced sealed design, which disables point cooling and dehumidification systems, dramatically reduces water usage, championing sustainable operations.
Invest in equipment meticulously engineered to endure the most rigorous testing environments, offering unmatched reliability and delivering outstanding performance for all your testing needs.
1. Choose the Circulating Air Mode: Opt for Courtyard Air Supply or Variable Speed Motor
For products requiring specific wind conditions, this customizable solution offers unmatched precision and adaptability, ensuring peak performance and optimal results every time.
2. Optimal Water Supply System: RO Reverse Osmosis
When precision in humidification is paramount, look no further than our sophisticated equipment that delivers a consistent supply of pure water. Through an automated production process, it guarantees maximum convenience and efficiency, ensuring your tasks are executed flawlessly.
3. Advanced Polymer Film/Rotor Dehumidification System: Elevate your dehumidification processes with our cutting-edge technology. This system stands as a testament to innovation, catering to the most stringent requirements effortlessly.
For the most demanding long-term testing in conditions of low temperature and humidity, our cutting-edge cellular chemical dehumidification system is the definitive choice. It efficiently handles a comprehensive humidity range, reaching as low as 10ºC/10% RH, meeting rigorous industry standards with ease.
4. LN.Two/ .LCO.2
Discover our array of premium professional products, featuring a diverse selection of specifications. We source directly from esteemed manufacturers in Europe and the United States, ensuring quality and reliability in every offering. LN.Two/ .LCO.2
Harness the power of our superior solenoid valves and cutting-edge control systems to swiftly address your testing needs. Experience rapid thermal acceleration and precise temperature reduction for optimal performance.
5. State-of-the-Art Ultrasonic Cooling and Humidification System: Experience unparalleled excellence in cooling and humidification for dynamic testing environments. This system is designed to tackle substantial heat loads effortlessly, proving indispensable as an auxiliary component.
For dynamic testing under high heat and humidity, our state-of-the-art ultrasonic cooling and humidification system is the ideal solution. Expertly engineered to meet these rigorous challenges, it serves as a crucial auxiliary component for peak performance.
6. Integrate a Glass Inner Door for Manual Operation Access: Maximize testing efficiency with our innovative glass inner door design. This feature allows for seamless manual operations while minimizing environmental disruptions, enhancing the integrity of your testing procedures.
Enhance testing efficiency and reduce environmental impact with our innovative glass inner door design (∧ 125Mm * Ea.). This feature facilitates manual operations without frequent door disruptions, preserving testing fidelity and integrity.
7. Cutting-Edge Real-Time Test Data Collection and Recording: Dive into the forefront of technological advancement with our sophisticated system. It ensures precise and immediate data capture and documentation, providing you with accurate, reliable insights throughout your testing journey.
Our advanced tape recorder is the epitome of precision and reliability, tailored for environments where accuracy is essential. It excels in simultaneously recording multiple temperature metrics, surpassing industry standards and ensuring unmatched process management.
8. Advanced Computer Connection Operation Recording Software: Transform your operational capabilities with our high-tech software, offering seamless computer connectivity for comprehensive recording. This innovation enhances functionality and optimizes system integration with remarkable ease.
Specially crafted for Mattel's environmental measurement suite, our sophisticated connection software offers unparalleled user experience. Enjoy effortless multi-machine management, swift data retrieval, and top-tier electronic features for superior clarity and usability.
Structure Technology
Innovative Structural Technology: Step into a new era of design where groundbreaking innovation meets robust structural technology. This advancement reshapes modern architectural perceptions, offering unparalleled excellence in both form and function.
1. Our Company's Premier Hardware Equipment: Explore an unmatched selection of German and Taiwanese machinery, including the renowned AMADA AIRS.-255NT Punching system. Equipped with carbon oxide and argon welders, each model exemplifies exceptional precision and innovation. Advance your capabilities with Autodesk Inventor 3D for sheet metal design, setting new benchmarks in modern manufacturing.
Delve into our esteemed collection of German and Taiwanese imported machinery, highlighted by the prestigious AMADA AIRS.-255NT Punching system. Featuring cutting-edge carbon oxide and argon welding machines, every item represents the zenith of precision and innovation. Master Autodesk Inventor 3D for comprehensive sheet metal design, ushering in a novel era of manufacturing excellence.
2. Crafted from high-quality galvanized steel, the shell stands as a beacon of durability. Its finish, a sophisticated electrostatic powder spray baking paint, not only enhances protection but also ensures an aesthetically pleasing appearance.
Three.. Meticulously crafted using premium imported SUS #304 stainless steel, the inner box features a full argon arc welding technique to prevent air leakage in high-temperature and humidity conditions. Its rounded corners facilitate effective condensate drainage, enhancing overall performance.
Revolutionary Refrigeration System Technology: Dive into a transformative era of refrigeration with our avant-garde 3D-optimized management paired with state-of-the-art frequency conversion control technology. This innovation ensures precise and flexible thermal regulation, offering unparalleled adaptability and superior flexibility in any environment.
Discover our revolutionary refrigeration system, featuring cutting-edge 3D-optimized management and pioneering frequency conversion control technology. This enables precise and flexible thermal control, offering unmatched adaptability and exceptional flexibility in temperature management, setting new standards for innovation.
Explore the sophistication of our variable frequency refrigeration system, where the frequency converter ingeniously modulates compression speed, even with a constant 50HZ power supply frequency. It meticulously fine-tunes cooling output based on real-time chamber loads, dynamically adjusting compressor frequency with temperature fluctuations. This results in exceptional energy efficiency and rapid, superior cooling performance.
Embrace unprecedented stability with our test chamber's variable frequency refrigeration system, delivering a consistently regulated temperature environment with minimal fluctuations. This advanced technology ensures balanced suction and exhaust pressures, optimizing operational consistency for remarkable performance and reliability.
Unveil the perfect synergy of energy-efficient refrigeration system technology and groundbreaking energy-saving innovations, crafted to elevate performance while significantly reducing resource consumption. This sets new benchmarks for sustainability and efficiency, redefining industry standards.
1. Experience the power of PID and PWM-driven VRF technology, featuring electronic expansion valves for superior thermal flow control. Achieve outstanding low-temperature energy efficiency as PID + PWM systems precisely manage refrigerant flow, ensuring streamlined operations without auxiliary heating needs.
Achieve seamless automatic temperature consistency through precise three-way flow adjustment across refrigeration, cold side, and heating side pipelines. This method excels in maintaining peak performance in low-temperature settings, reducing energy consumption by 30% while enhancing overall efficiency.
Our advanced technology, leveraging the Danish Dan-foss Company's ETS System electronic expansion valve, permits dynamic adjustments in refrigeration capacity. It seamlessly adapts to varying cooling rates, optimizing compressor cooling capacity for elevated efficiency and performance.
2. Experience innovation with our dual compressor group design technology, featuring automatic start-stop functionality that aligns with load conditions to maximize efficiency. This advanced feature, enabled by our cutting-edge series design, ensures optimal resource utilization.
Our refrigeration unit cleverly integrates a binary compound of semi-closed compressors with a fully dense single-stage system. It smartly adjusts to load requirements, delivering optimal cooling capacity while extending compressor lifespan, ensuring long-term reliability and performance.
Innovative Cold Circuit Technology: Embrace a revolutionary shift in cold circuit technology where cutting-edge designs redefine standards, significantly amplifying system efficiency and setting new benchmarks in the industry.
Our power distribution layout is meticulously crafted in harmony with technical department blueprints, utilizing globally esteemed electrical component brands to ensure unmatched reliability and excellence in every aspect.
At Guangdong MENTEK Testing Equipment Co., Ltd, we proudly integrate esteemed brands like Omron, Sch-neider, and Germany's Phoenix Terminal block into our sophisticated designs. Each line code is precisely labeled for operational ease and reliability, ensuring a seamless experience. Our commitment to excellence leads us to select only the most trusted Chinese brands, guaranteeing superior performance and long-lasting durability.
Selecting the reputable Pearl River Cable as our brand of choice ensures unparalleled wire quality and exceptional performance. Our control lines feature a minimum of 0.75 Square RV soft copper wire, known for robust and efficient conductivity. Engineered with precision, key load components like motor compressors meet rigorous EC standards. Trap diameters are carefully tailored to adhere to cable groove wiring safety current standards. The machine's cable port is expertly sealed, preventing frost-induced short circuits and safeguarding the terminal within the junction box.
Each terminal fixing screw is meticulously secured using precisely defined fixed torque, ensuring connections are both secure and swift. This precision reduces risks like loose fires, significantly enhancing safety and reliability. Our dedication to meticulous detail ensures peace of mind for every user.
Refrigeration Series Process: A Thorough and Meticulous Approach
1. Standardization: Forging a Path to Unrivaled Excellence
1.1 Our exceptional steel pipe piping process, combined with rigorous welding standards, underscores our unwavering commitment to excellence and unmatched reliability in every aspect.
By meticulously adhering to standardized pipe layouts, we guarantee the unwavering stability and dependable performance of our systems. This commitment ensures peace of mind and delivers exceptional functionality for our valued clients.
1.2 Utilizing state-of-the-art Italian-imported pipe bending machinery, we craft flawless steel pipe bends. This avant-garde technique significantly minimizes the requirement for welding points and reduces oxide formation within the tubes during welding, thereby enhancing the overall reliability of the system.
Prioritizing Unmatched System Reliability in Every Aspect
Pioneering Shockproof Innovations and Durable Pipeline Support Solutions
2.1 At MENTEK, we set the bar high for the support and shock resistance of refrigeration copper pipes. By meticulously assessing potential seismic scenarios, we incorporate arc bends and specialized nylon fixed clamping to prevent deformation and leakage from circular vibrations and temperature fluctuations, significantly boosting the overall reliability of the refrigeration system.
Enhancing Reliability Across the Entire Refrigeration System
2.2 Advanced Oxidation-Free Welding Techniques
It is widely acknowledged that the cleanliness of a refrigeration system's pipeline is crucial to its efficiency and longevity. MENTEK employs a standardized, precision-controlled welding procedure to limit excessive oxide contamination, ensuring the system consistently operates at peak performance.
Through rigorous practices, MENTEK significantly boosts the efficiency and prolongs the operational lifespan of the refrigeration system by reducing oxide pollution during welding, thereby maximizing both reliability and performance.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}