Rapid Humidity Temperature Change Chamber for Advanced Environmental Analysis in Dongguan
Product Description
Introducing the unrivaled Guangdong Humid Testing Chamber, a masterpiece in environmental simulation crafted with utmost precision and versatility. This cutting-edge chamber is meticulously engineered for performing comprehensive high and low-temperature tests on a wide range of electrical components, diverse products, parts, and materials. Whether your testing requirements demand constant temperatures, gradient changes, rapid temperature fluctuations, or wet heat assessments, MENTEK's advanced chambers are expertly designed to not only meet but exceed Chinese national standards T10586-2006 and T10592-2008, ensuring unparalleled reliability and impeccable performance.
| Model |
|
MESS-280 |
MESS-500 |
MESS-1000 |
MESS-1500 |
| Parameter |
Temperature range |
-40~+150ºC(-20+80ºC):- 70+150ºC(-55+80ºC) |
| |
Temperature fluctuation |
±0.3ºC±0.5ºC |
| |
Temperature deviation |
± |
| |
Humidity deviation |
±3%RH(<75%RH)±5%RH (<=75%RH) |
| |
Heating and cooling rate |
5/10/15/20ºC/min |
| |
Standard load(aluminum ingot) |
5kg |
12kg |
25kg |
30kg |
| Structure |
Casing |
High strength cold-rolled steel plate double-sided fine powder baking paint |
| |
Inner wall |
SUS # 304 Stainless Steel 2B Panel |
| |
Thermal insulation material |
Glass fiber+polyurethane foam |
| Cooling system |
Cooling method |
Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method |
| |
refrigeration machine |
Imported compressor |
| Heater |
Strip heater |
| Observation window( mm) |
300*400/400*600 |
| Test hole( mm) |
50 at left side |
100 at right side |
| Temperature sensor |
Platinum resistance pt100 |
| Controller |
Original Japanese imported 7-inch TFT touch screen |
| Recording device |
Built in paperless recorder function (can be externally printed) |
| Interface |
UCB interface connection operation |
| Inner size(cm) |
Width |
70 |
80 |
100 |
130 |
| |
Height |
80 |
90 |
100 |
115 |
| |
Depth |
50 |
70 |
100 |
100 |
| Height of motor cover |
19 |
21 |
22 |
21 |
| Power |
AC380V50Hz Three-phase four-wire |
| Standard configuration |
1 product user manual. 1 experimental report, 1 certificate of conformity and quality assurance certificate, 2 partitions, and 1 set of silicone rubber soft plugs |
| Meet the configuration requirements |
GB11158\GBT2423\GC/T2423.1/T2423.2/GBT24423.2GJB1500.3\GJB15.0 |
Note:
1. The external dimensions are tailored according to the heating and cooling rate for optimal performance.
2. Water cooling type: Maintains water temperature between 10~28 ºC with a water pressure of 0.1~0.3Mpa to ensure superior cooling performance.
3. Enhanced functionality with the option to include dampness and heat regulation.
4. Upgradeable with an optional dry air blowing system for added versatility.
5. Optional liquid nitrogen function available, offering rapid cooling capability of 30 ºC/min.
6. Standard loads are provided, but customization is available to meet specific client needs.
The equipment meets the following testing standards
Our state-of-the-art testing equipment meticulously adheres to an extensive range of stringent standards: National Standard/T2423.1-2008 Test A for Low Temperature; National Standard/T4243.2-2008 Test B for Partial High Temperature; National Standard/T2433.3-2006 Test Cab for Constant Humidity and Heat; and Chinese National Standard/T2423.4-2008 for Change, Damp Heat. Additionally, it conforms to the China National Standard/T2423.34-2012 Test Z/AnnoDominique, supporting a broad array of temperature and humidity scenarios with its comprehensive performance capabilities.
Structure of the testing chamber
The robust structure of the testing chamber boasts an outer shell crafted from premium galvanized color steel plate, ensuring exceptional durability and protection.
Inside, the chambers feature SUS304 stainless steel plates with adaptable hanging hole strips for dynamic configurations. Each chamber is equipped with a test track frame, insulated by a thick 10 cm layer of rigid polyurethane foam and glass wool. The inner and outer box doors are securely integrated using high-quality electric wood chicken glass fiber board frames, providing outstanding low-temperature insulation. The silicone foam door sealing strip, expertly designed with dual channels, offers remarkable temperature resistance.
Experimental space air circulation:
Utilizing a sophisticated air supply system, the chamber is equipped with high and low-temperature resistant multi-blade aluminum wind turbines, powered by motors. These turbines expertly circulate air through upper louvers and draw it back from the bottom, ensuring temperature uniformity of less than 2 ºC across an impressive range of -70~100 ºC, evaluated at an international standard of 10 points.
Controller operating system
The system incorporates a cutting-edge, low-power (8W) temperature and humidity control device, delivering exceptional accuracy with a temperature control precision of ±3 ºC.
1. High resolution screen:
Experience unparalleled visual clarity with a 7-inch TET true-color LCD resistive touch screen, featuring an impressive resolution of up to 800 * 480 for crystal-clear visibility and precision.
2. High program capacity:
With expansive memory, it can store up to 1000 programs with 1000 segments, supports 999 total loops and 999 partial loops, offers 10 program linking capabilities, and provides real-time temperature curve displays for effortless data queries and analysis.
3. High data storage capacity:
Effortlessly transfer historical data spanning up to 300 days by directly uploading via hard disk or network cable to your computer, or seamlessly load it into the controller for continuous data access.
4. Seamless Connectivity:
Experience effortless connectivity with our advanced controller, featuring LAN standard Ethernet communication. This remarkable system seamlessly manages up to 16 devices through a unified software platform. With its intuitive outflow interface, integration into regional networks becomes a breeze, allowing for remote program control, real-time monitoring, and historical curve replay functions with unmatched ease.
State-of-the-Art Heating and Humidification System
Our cutting-edge system incorporates bare wire nickel-chromium alloy electric heating tubes, delivering low thermal inertia, minimal heating overshoot, and unmatched precision in temperature fluctuations. This is achieved through sophisticated power controls that optimize performance to the highest standards.
1. Advanced Humidifier:
Step into the realm of precision environmental testing with our groundbreaking humidification technology. Featuring a state-of-the-art humidification cylinder crafted using the reliable boiler method, it ensures exceptional moisture uniformity. For those seeking rapid and accurate control, our surface humidification via the water plate method delivers unparalleled speed and precision, deftly eliminating impurities like scale within the chamber. Perfectly suited for dyeing applications, it excels in low humidity conditions while ensuring effortless maintenance. The humidification tube, encased in a seamless stainless steel shell, boasts over 50M Ω insulation resistance, backed by a robust anti-dry burning controller for elevated safety.
2. Maximizing Efficiency and Conservation:
Discover the convenience of our front-mounted 25L capacity water tank, ingeniously crafted with a quick-connect system for seamless water and power management. Enjoy hassle-free disassembly and cleaning to maintain precision. Achieve precise dehumidification control across three distinct humidity zones, aligning with stringent national standards for high temperature and humidity conditions at 85 ºC and 85% RH. By deactivating the point cooling and dehumidification system, our advanced sealed design significantly reduces water usage, enabling sustainable operations.
Secure your investment with our equipment, engineered to thrive in the most challenging testing environments, ensuring unparalleled reliability and top-tier performance.
1. Choose the Optimal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
For products that demand specific wind speed conditions, our customizable solution offers unmatched precision and adaptability, ensuring optimal performance at all times.
2. Opt for the Ideal Water Supply System: RO Reverse Osmosis
When precision in humidification is critical, our equipment guarantees a continuous supply of pure water through an automated production process, ensuring maximum convenience and time efficiency.
3. Advanced Polymer Film/Rotor Dehumidification System
For critical, long-term testing under low-temperature and low-humidity conditions, our sophisticated cellular chemical dehumidification system is your ultimate solution. It accommodates an extensive humidity range down to 10 ºC/10% RH or lower, meeting the most stringent requirements with ease.
4. LN.Two/ .LCO.2
We offer an extensive range of superior professional products, sourced directly from premier manufacturers in Europe and the United States, ensuring top-notch quality and specifications. LN.Two/ .LCO.2
Leverage our advanced solenoid valves and control systems for rapid thermal acceleration and precise temperature reduction, meeting your urgent testing needs with efficiency and reliability.
5. Pioneering Ultrasonic Cooling and Humidification System
When faced with dynamic testing of large heat loads in high temperature and humidity environments, our pioneering ultrasonic cooling and humidification system rises to the challenge. Equip it as an auxiliary component to achieve optimum performance and meet the demands of these rigorous conditions.
6. Integrate a Glass Inner Door for Manual Operations
Mitigate environmental impact during frequent testing or object movement by incorporating manual operations through a glass inner door (∧ 125Mm * Ea.). This innovative design significantly minimizes disruptions from frequent door openings, enhancing the integrity of your testing procedures.
7. Real-Time Test Data Collection Recorder
For scenarios demanding the precise and simultaneous recording of multiple temperature measurements, employ a recorder designed to meet stringent specification standards. The tape recorder emerges as your most reliable and dependable ally, perfectly catering to these exacting requirements with unmatched precision.
8. Computer Connection Operation Recording Software
Exclusively crafted for Mattel's sophisticated environmental measuring machine suite, our cutting-edge connection software offers unparalleled capabilities. It empowers users with the ability to effortlessly monitor multiple machines, seamlessly retrieve data from operational units, and enjoy superior electronic functionalities for an unmatched user experience.
Structural Technology
1. The Company's Hardware Equipment:
Introducing our elite collection of imported German and Taiwanese machinery, prominently featuring the AMADA AIRS.-255NT Punching system. Each model, from carbon oxide to argon welding machines, epitomizes precision and innovation. Delve into the versatility of multiple Autodesk Inventor 3D drawing software applications, expertly utilized for sheet metal design, disassembly, and virtual assembly, revolutionizing modern manufacturing excellence.
2. Crafted with superior galvanized steel, our shell's durability is significantly enhanced by an advanced electrostatic powder spray baking paint finish, providing long-lasting protection and aesthetic appeal.
Three.. Designed with imported SUS #304 stainless steel, the inner box undergoes a meticulous full argon arc welding process to prevent high-temperature and high-humidity air leakage. Its rounded corners are strategically engineered for efficient condensate drainage, maximizing performance.
Revolutionary Refrigeration System Technology
Experience 3D-optimized refrigeration system management at its pinnacle with pioneering frequency conversion control technology, delivering precise and adaptable thermal regulation.
Within our variable frequency refrigeration system, the ingenious frequency converter dynamically adjusts the compression speed, despite a fixed power supply frequency of 50HZ, to align cooling output with real-time test chamber loads. As chamber temperatures fluctuate, compressor frequency seamlessly adapts, enhancing energy efficiency and enabling rapid cooling for performance that is truly unparalleled.
Our test chamber's innovative variable frequency refrigeration system flawlessly maintains a stable temperature environment with minimal fluctuation. This cutting-edge system ensures balanced suction and exhaust pressures, optimizing operational consistency.
Energy-efficient refrigeration system technology combined with advanced energy-saving innovations.
1. Embrace the future with PID and PWM-driven VRF technology, utilizing electronic expansion valves for unparalleled thermal flow control and achieving impressively low-temperature energy efficiency. The synergy of PID + PWM systems enhances refrigerant flow regulation, ensuring effective operation without the need for auxiliary heating.
Through precise three-way flow adjustment of refrigeration, cold side, and heating side pipelines, automatic temperature constancy is accomplished. This method excels in low-temperature scenarios, reducing energy consumption by 30% and optimizing overall performance.
Our technology is underpinned by the Danish Dan-foss Company's ETS System electronic expansion valve, which dynamically adjusts refrigeration capacity, catering to diverse cooling rates and optimizing compressor cooling capacity.
2. Integrating a dual compressor group design technology, our advanced series design automatically aligns start-stop functions with load conditions, optimizing efficiency seamlessly.
The refrigeration unit configuration boasts a binary compound of semi-closed compressors and a fully dense single-stage system. This intelligent design dynamically adjusts based on load requirements, ensuring optimal cooling capacity and extending compressor longevity.
Innovative Cold Circuit Technology
Power distribution layout is meticulously crafted according to technical department blueprints, employing globally recognized electrical component brands to guarantee optimal reliability.
At Guangdong MENTEK Testing Equipment Co., Ltd, we take pride in incorporating esteemed brands like Omron, Sch-neider, and Germany's Phoenix Terminal block into our designs. Each line code is clearly marked for user convenience and reliability. We meticulously select only the most reputable brands in China to ensure exceptional performance and durability.
With the prestigious Pearl River Cable as our selection, we promise supreme wire quality and unparalleled performance. Our control lines are crafted with a minimum of 0.75 Square RV soft copper wire, guaranteeing excellent conductivity. Key load components, like motor compressors, are expertly designed to comply with EC standards. We precisely choose trap diameters to meet cable groove wiring safety current standards, ensuring protection. The machine's cable port is meticulously sealed to prevent frost-related short circuits, safeguarding the junction box terminal.
Every terminal fixing screw is meticulously fastened with standard fixed torque, guaranteeing a swift and secure connection. This attention to detail eradicates potential risks like loose fires, elevating both safety and reliability to exceptional standards.
Refrigeration Series Process: A Thorough and Holistic Approach
1. Standardization: The Essential First Step towards Unmatched Excellence
1.1 Our dedication to excellence is embodied in our high-quality steel pipe piping process and rigorous welding standards, ensuring unparalleled reliability and performance.
By strictly adhering to standard pipe layouts, we ensure the unwavering stability and dependability of our model systems.
1.2 Employing cutting-edge Italian imported pipe bending machines, we produce seamless steel pipes. This advanced technique significantly reduces welding points and minimizes oxide formation during welding, thereby enhancing the overall system's reliability.
Ensuring the Highest Level of System Reliability is Our Central Commitment
Shockproof Design and Durable Pipeline Support for Maximum Efficiency
2.1 At Meitec, we establish strict standards for the support and shock prevention of refrigeration copper pipes. By thoroughly considering seismic protection scenarios, we integrate arc bends and specialized nylon fixed clamping to avert deformation and leakage caused by circular vibration and temperature changes. This fortifies the entire refrigeration system's reliability.
Enhancing Reliability Across the Entire Refrigeration System
2.2 Cutting-edge Oxidation-Free Welding Process for Superior Performance
Recognizing that the cleanliness within the refrigeration system's pipeline is crucial to its efficiency and longevity, Metco employs a standardized charging welding procedure. This process prevents excessive oxide contamination, ensuring peak performance.
Through precise methodologies, Metco significantly boosts refrigeration system efficiency and extends its operational lifespan. By minimizing oxide pollution during welding, we maximize system reliability and excellence.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}