Advanced Environmental Tester for Battery High Temperature Damp Heat Analysis Equipment
Product Description
Discover the unparalleled prowess of the Advanced Temperature Damp Heat Testing Chamber, a masterpiece from Guangdong MENTEK Testing Equipment Co., Ltd. Meticulously engineered, this cutting-edge equipment is designed to masterfully conduct both high and low temperature trials across an extensive array of electrical products, parts, and materials. Experience the pinnacle of environmental simulation and reliability testing, delivering both constant and gradient temperature shifts alongside a comprehensive evaluation of wet heat conditions. Compliant with the esteemed Chinese National Standards T10586-2006 and T10592-2008, our revolutionary humidity and heat test chambers set the benchmark for precision, quality, and trustworthiness.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75 percentRH.≤±2%RH., B) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flowQUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seamsTIGContinuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant Standard Test Requirements
Monomer Battery Safety Test:The temperature cycle test is executed through the following steps:
1.1. The monomer battery is charged following the 6.1.3 method.
1.2 The monomer battery is strategically positioned within the temperature chamber, meticulously calibrated in accordance with Table 1 and Figure 2. This precise procedure is reiterated for 5 cycles, with vigilant observations over a 1-hour duration, ensuring utmost accuracy.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 Temperature Cycle Test: Detailed specifications of temperature and time for a single cycle.
Battery Module Safety Test:The temperature cycle test is performed following these steps:
1.1.1. The battery module is charged in line with the 6.1.4 method.
1.1.2 The temperature of the battery module is expertly set within the temperature chamber, precisely adjusted for 5 cycles as outlined in Table 1 and Figure 2, ensuring unparalleled accuracy.Continuous observation is rigorously conducted for 1 hour, ensuring meticulous accuracy and performance evaluation.
The equipment complies with the following prestigious testing standards:
Our equipment strictly conforms to revered national standards, including National Standard T2423.1-2008 Test A for Low Temperature, National Standard T4243.2-2008 Test B for High Temperature (Partial), National Standard T2433.3-2006 Test Cab for Constant Humidity and Heat, Chinese National Standard T2423.4-2008 Test Decibel for Change and Damp Heat, and China National Standard T2423.34-2012 Test Z/AnnoDominique. These exacting standards guarantee comprehensive evaluations of temperature and humidity combinations, ensuring the equipment's phenomenal performance spectrum is fully realized.
Intricately Designed Structure of the Testing Chamber
Executed with outstanding precision, the outer hull of the test box is crafted from resilient galvanized color steel plate, offering unparalleled durability and longevity.
The inner boxes exemplify superior craftsmanship with SUS304 stainless steel plates, ingeniously equipped with adjustable hanging hole strips for precise test track placement. Insulated with at least 10 cm of rigid polyurethane foam and glass wool, these layers ensure optimal performance. The front doors are an engineering marvel, framed with premium electric wood chicken glass fiber board, providing excellent low-temperature insulation. This is further enhanced by silicone foam sealing strips, capable of withstanding a broad temperature range, ensuring exceptional efficiency.
Efficient Experimental Space Air Circulation:
A meticulously engineered air supply system utilizes multi-blade aluminum wind turbines, capable of withstanding extreme temperatures. Propelled by powerful motors, air is expertly directed to the upper louvers and returns from the bottom, maintaining a deviation of less than 2 ºC across the -70~100 ºC range, meeting international benchmarks at 10 points.
Advanced Controller Operating System
Our system integrates a state-of-the-art, low-power (8W) temperature and humidity control device, ensuring unmatched precision in temperature regulation, with accuracy reaching an impressive ± 3 ºC.
1. High-Resolution Display Screen:
Immerse yourself in a visually captivating experience with our stunning 7-inch TET true color LCD resistive touch screen. This cutting-edge display boasts an impressive resolution of up to 800 * 480, offering an unparalleled user interface encounter that elevates your operational interactions to an extraordinary level.
2. Extensive Program Capacity:
Featuring an advanced program capacity, our state-of-the-art testing chamber is a powerhouse of performance, capable of storing an impressive 1000 programs and 1000 segments. Effortlessly manage 999 total loops and 999 partial loops, ensuring seamless functionality. Benefit from the innovative integration of 10 sets of program linking functions, offering boundless flexibility. The real-time temperature curve display provides immediate access for direct queries, remarkably enhancing operational efficiency and convenience.
3. Expansive Data Storage Capacity: Harness the transformative power of robust data storage capabilities intricately woven into this chamber's design.
Effortlessly manage and transfer comprehensive historical data with an impressive storage capacity spanning 300 days of operations. Optimize data management with seamless uploads via a network cable to your computer or directly to the sophisticated controller, ensuring unparalleled efficiency and streamlined operations.
4. Seamless Connectivity: Experience the unmatched power of connectivity solutions meticulously engineered for optimal efficiency and simplicity.
Leverage LAN standard Ethernet communication for a seamless controller connection experience. This robust system supports up to 16 devices with a singular software setup, seamlessly integrating with regional networks to enable remote program control. Features such as real-time monitoring and historical curve playback redefine user experience, elevating it to unprecedented heights.
Sophisticated Heating and Humidification System: Delve into the intricacies of this cutting-edge system, designed with precision and innovation in mind.
Meticulously crafted, this system incorporates bare wire nickel chromium alloy electric heating tubes, ensuring optimal performance. Enjoy the benefits of low thermal inertia and minimal heating overshoot, with high-precision fluctuations achieved through carefully controlled power for exemplary performance, making it a standout in its class.
1. Cutting-edge Humidifier: Uncover the pinnacle of humidification technology with our sophisticated, state-of-the-art humidification system.
Our advanced humidification system employs a leading-edge humidification cylinder with the boiler method, ensuring exceptional uniformity. The surface humidification with the water plate method accelerates the process, providing precise control without impurities such as scale within the chamber, achieving remarkable performance even at low humidity. This system is easy to maintain and clean, featuring a high-quality humidification tube with a seamless stainless steel casing, boasting insulation resistance exceeding 50M Ω. It includes a strong anti-dry burning controller for superior safety, offering peace of mind.
2. Maximizing Water Efficiency and Energy Conservation: Elevate your sustainability and resource conservation efforts to unprecedented heights.
Featuring a spacious 25L front-mounted water tank with an intuitive quick-connection design, it enables rapid water and electricity plug-ins, facilitating effortless disassembly and maintenance. Deliver precise dehumidification across three distinct humidity zones, optimizing water usage while adhering to stringent national standards for high-temperature and humidity conditions such as 85ºC and 85% RH. The innovative closed design significantly reduces water consumption, embodying sustainability, especially when the point cooling and dehumidification system is disabled.
Choose a testing solution that exceeds even the most rigorous conditions, delivering unmatched performance and reliability.
1. Optimal Circulating Air Mode Selection: Opt for Courtyard Air Supply or Variable Speed Motor for unparalleled operational efficiency and adaptability.
For products requiring precise wind speed control, this innovative solution is the ideal choice, offering strategic adaptability and precision with utmost ease, ensuring that your operations are smooth and efficient.
2. Optimal Water Supply System: RO Reverse Osmosis - Elevate your system with water purity and reliability that are simply unmatched.
Our automatic system revolutionizes the humidification process by providing a pure, consistent water supply through an advanced RO reverse osmosis system. Save precious time and enjoy the convenience of this efficient solution that guarantees unmatched purity and performance, setting a new standard in water supply systems.
3. Advanced Polymer Film/Rotor Dehumidification System: Explore advanced dehumidification solutions expertly crafted to meet your specific requirements.
For testing scenarios that demand the utmost in low-temperature and low-humidity conditions, our cutting-edge cellular chemical dehumidification system stands as the ultimate choice. With a remarkable performance capability, it achieves a humidity range as low as 10ºC/10% RH or even lower, effortlessly fulfilling the most exacting and stringent specifications you may encounter.
4. LN.Two/ .LCO.2 LN.Two/ .LCO.2
We take pride in offering a wide and comprehensive selection of superior, professional-grade products, carefully sourced directly from the most distinguished manufacturers throughout Europe and the United States. Trust in the quality and reliability of our outstanding offerings, which are thoughtfully designed and crafted to meet every specific requirement you may encounter. LN.Two/ .LCO.2
Our advanced solenoid valves and integrated control systems are meticulously engineered to meet the rigorous demands of rapid testing environments, delivering swift testing and temperature control with unmatched precision. Depend on our solutions to consistently provide the exceptional excellence you expect and deserve.
5. Ultrasonic Cooling and Humidification System: Expand your testing capabilities under extreme conditions with our state-of-the-art system, crafted for peak efficiency and outstanding performance.
Designed for dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system is precisely crafted to meet the most rigorous standards. As an essential supplementary device, it guarantees maximum performance and reliability, ensuring your testing operations remain safeguarded under the most challenging conditions.
6. Premium Glass Inner Door with Manual Operation Port: Enhance your testing experience with this premium feature, engineered for both convenience and safety.
To ensure uninterrupted operations even during frequent relocations of test objects, our chamber features a premium glass inner door equipped with a practical manual operation port (∧ 125Mm * Ea.). This innovative design minimizes the environmental impact often associated with repeated chamber access, thereby preserving the integrity of your testing conditions seamlessly.
7. State-of-the-Art Real-Time Test Data Recorder
In settings where precise temperature readings for both the testing environment and the test object are critical, our certified recording solutions are indispensable. The specialized tape recorder is expertly engineered to fulfill your comprehensive data acquisition needs with unparalleled precision, ensuring that every detail is meticulously captured with confidence.
8. Cutting-Edge Computer Connectivity and Operation Recording Software
Our bespoke connection software, meticulously crafted for Mattel's environmental measuring machine kitchen, sets new standards for convenience and functionality. It enables seamless oversight of multiple machines, ensures effortless data retrieval from active devices, and provides users with the most advanced electronic capabilities available today.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}