High Precision Battery Impact Testing Table for Reliable Performance Measurement Battery Tester
Product Description
Step into a realm of unparalleled precision with our groundbreaking High Performance Temperature Humidity Chamber. This adaptable testament to excellence is meticulously engineered for comprehensive high and low-temperature evaluations, applicable to a vast array of electrical products, components, and materials. The chamber is designed to undertake rigorous environmental simulation reliability testing, including constant gradient, sudden mutation, and wet heat assessments. Developed with pride by MENTEK, these chambers are a testament to our commitment to quality, strictly adhering to Chinese national standards/T10586-2006 and T10592-2008, ensuring unmatched accuracy and dependability.
| Model |
MBS-IS200 |
| Rated load |
10 Kilogram(Including fixtures and test products) |
| Table size |
Length 200×Width 200 |
| Impact waveform |
Semi-sine wave |
| Peak acceleration (semi-sine wave) |
150~ 15,000 m/s² |
| Pulse duration (semi-sine wave) |
0.6-20ms |
| External size |
W1000×L500×H2700mm |
| Equipment weight |
1500 Kilogram |
| Impact form |
Free fall |
| Maximum drop height |
1500mm |
| Power supply |
3-phase 380V, 50/60Hz |
| Hydraulic source |
Random configuration |
| Ambient temperature |
0~40ºC |
| Environmental humidity |
Less than 85% |
| Reliability |
The average fault-free cumulative working time is ≥1000h |
| Measurement and control system |
ShockDAQ.Impact and collision measurement and control system |
| Applicable standards |
GJB.150,GJB.360,GJB.548,China National Standard/T2423,GJB.1217 |
| Identification criteria |
Acceleration amplitude, pulse width, uniformity and lateral motion ratio satisfyJJG.541-88 |
Note: We offer the flexibility to tailor every dimension to perfectly align with your specific requirements, ensuring a perfect fit for your needs.
Relevant standard test requirements
Our equipment proudly meets the prestigious and rigorous standards: IEC62133-2012, UL1642, UN38.3, and 31241-2014, reflecting our dedication to quality and compliance.
Please refer to section 4.5 for detailed sample preparation. Conduct the acceleration impact test once the sample is fully charged, following the prescribed method. This examination should be sequentially executed in three mutually perpendicular directions. For comprehensive testing methodology, refer to section 7.4.
Upon conclusion of the experiment, proceed with a complete discharge and recharge cycle, following the charging and discharging protocol outlined in section 4.5. The sample must exhibit no signs of ignition, explosion, or leakage, ensuring safety and reliability.
Our state-of-the-art equipment is built to adhere to the following rigorous testing standards:
National Standard/T2423.1-2008 Test A: Low Temperature National Standard/T4243.2-2008 Test B: High Temperature (Partial) National Standard/T2433.3-2006 Test Cab: Constant Humidity and Heat Chinese National Standard/T2423.4-2008 Test. Decibel: Change, Damp Heat China National Standard/T2423.34-2012 Test Z/AnnoDominique: Combination temperature and humidity tests conducted within the equipment's performance thresholds.
Structure of the Testing Chamber
The testing chamber boasts a robust exterior crafted from galvanized color steel plates, designed for unrivaled durability and enhanced longevity, ensuring it withstands the test of time.
The interior is masterfully constructed with SUS304 stainless steel, featuring strategically placed side-mounted adjustable hanging hole strips alongside a flexible test track frame. At least 10 cm thick layers of rigid polyurethane foam and glass wool deliver exceptional thermal insulation. The interface between inner and outer doors is crafted using premium electric wood chicken glass fiber board frames, ensuring superior low-temperature insulation. The door's sealing strip, composed of a double-channel series silicone foam, provides unbeatable wide temperature resistance.
Advanced Experimental Space Air Circulation:
Our advanced air supply system utilizes multi-blade aluminum wind turbines, expertly engineered to endure extreme temperatures. Powered by motors, these turbines efficiently propel air to the upper louvers, with return flow from the bottom, achieving extraordinary uniformity of less than 2 º C across the extensive range of -70~100 º C, setting a global precision benchmark.
Controller Operating System
Embodying the latest in technology, our low-power (8W) temperature and humidity control device delivers outstanding temperature control precision of up to ± 3 º C, ensuring reliable and consistent performance, tailored to your exact needs.
1. High Resolution Screen:
Experience superior clarity and vivid visuals on a 7-inch TET true color LCD resistive touch screen, boasting an impressive resolution of 800 * 480, offering an enhanced user experience.
2. High Program Capacity:
With an expansive memory capacity accommodating 1000 programs/1000 segments, 999 total loops, and 999 partial loops, our system provides 10 sets of program linking functionalities, supplemented by real-time temperature curve displays for effortless and swift access to queries.
3. High Data Storage Capacity:
Effortlessly manage up to 300 days of historical data in storage operation mode by uploading directly to a hard disk or network cable, or fully integrate it into the controller for seamless data management, ensuring efficiency and convenience.
4. Easy Connection:
Our state-of-the-art controller is a marvel of modern technology, featuring LAN standard Ethernet communication. It effortlessly connects with up to 16 devices via a single, user-friendly software platform, revolutionizing your testing setup. Integrate seamlessly into regional networks through its advanced outflow interface, granting you the power of remote program control. Revel in the luxury of real-time monitoring and the ability to playback historical curves, providing unparalleled oversight and precision at your fingertips.
Heating and Humidification System
Our expertly engineered system harnesses the power of bare wire nickel chromium alloy electric heating tubes, delivering superior performance with minimal thermal inertia and negligible heating overshoot. This precision engineering ensures that your system operates at its utmost efficiency, handling fluctuations with effortless finesse.
1. Humidifier:
Experience the unmatched precision and uniformity of our sophisticated humidification system. The innovative boiler method humidification cylinder offers unrivaled consistency, complemented by a surface humidification approach that delivers swift operation and superior control precision. This cutting-edge technology eliminates impurities such as scale within the chamber, boasting outstanding dyeing capability and remarkable performance even at low humidity levels. Maintenance is simplified with its seamless stainless steel shell, offering insulation resistance over 50M Ω, and an advanced anti-dry burning controller ensures enhanced safety.
2. Optimizing Water Usage and Energy Efficiency:
Experience ultimate ease with our 25L high-capacity water tank, featuring a front-mounted quick connection system that simplifies water and electricity connections for effortless disassembly and cleaning. Enjoy precise dehumidification across three distinct humidity zones, dramatically reducing water usage while adhering to stringent national standards for high temperature and humidity conditions up to 85 º C and 85% RH. When point cooling and dehumidification systems are deactivated, its innovative closed design significantly reduces water consumption.
Invest in unparalleled equipment, meticulously crafted to excel under the most demanding testing conditions, ensuring reliability and precision.
1. Choose the Ideal Circulating Air Mode: Courtyard Air Supply or Variable Speed Motor
For product specifications that demand precise wind speed requirements, our customized solution is your optimal choice. It is intricately tailored to meet your unique needs with exacting precision.
2. Select the Right Water Supply System: RO Reverse Osmosis
Utilizing pure water for your humidification needs, our cutting-edge equipment features an automatic water production system, ensuring a continuous supply of pure water. This innovation provides unmatched convenience and saves you valuable time.
3. Advanced Polymer Film/Rotor Dehumidification System
For operations demanding continuous low-temperature and low humidity testing, our advanced cellular chemical dehumidification system is indispensable. It achieves an impressive humidity range of up to 10 º C/10% RH or even lower, exceeding your most rigorous requirements.
4. LN.Two/ .LCO.2
Explore our exclusive selection of professional products, meticulously imported from Europe and the United States, available in a comprehensive array of specifications tailored to meet your precise needs. LN.Two/ .LCO.2
Our cutting-edge solenoid valves and integrated control systems are expertly engineered to accommodate your rapid testing requirements, enabling swift acceleration and efficient temperature regulation.
5. State-of-the-Art Ultrasonic Cooling and Humidification System
Engineered for dynamic high heat load testing in extreme temperature and humidity conditions, our ultrasonic cooling and humidification system meets these rigorous demands with precision, serving as a critical auxiliary solution.
6. Enhance Functionality with a Glass Inner Door and Manual Operation Features
Streamline frequent movement and operation of the test subject with our practical manual operation feature via the glass inner door (∧ 125Mm * Ea.), effectively minimizing environmental impact when opening the chamber door.
7. Real-Time Data Acquisition Recorder
Our recorders, meticulously engineered to adhere to stringent industry standards, deliver the capability to record multiple temperature readings simultaneously. Whether capturing data from the testing environment or directly from the test object, our tape recorders provide unparalleled precision and accuracy to meet every recording requirement with excellence.
8. Cutting-Edge Software for Advanced Computer Connection and Operation Recording
2fcf7e28
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
Audited Supplier 
){kind=link}