| Customization: | Available |
|---|---|
| After-sales Service: | Support Operation Guidance |
| Power Supply: | 220V |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Relevant standard test requirements
Meet the standards: IEC.62133-2012,UL.1642. United Nations38.3 and 31241-2014 standards
Combustion jet: Put the battery according to 4.5.1. The specified test method is to place the battery on the wire net of the test tool after being fully charged. See the test equipment. Appendix E.2. If the test process when the battery slips. The battery sample can be fixed on the wire net with a single wire. If such a situation does not occur. Then you can't bundle the battery, add it with flame. Thermal battery, when it appears to stop heating in the following three cases:
A) Battery explosion
B) The battery is completely burned
C) Continuous heating 30min, but the battery did not catch fire or explode.
Parts that make up the battery after the test (except for dust-state products) someone. The battery as a whole must not penetrate the aluminum mesh.
Main features:
This machine is suitable for the flame resistance test of lithium batteries. Drill a diameter of 102 on an experimental platform. The round hole, and place a steel wire mesh on the round hole. The measured battery will be placed on the steel wire. On the mesh screen. Install an octagonal aluminum wire mesh around the sample and then light the burner, and heat the test product until the battery explodes or burns out. And the combustion process time keeping.
Main parameters
| Model | MBS-RS225 |
| Burner | The inner diameter of the Bensheng lamp and pipe mouth is 0.375 inches (9.5mm) length about 10mm |
| Flame application time | 0~999.9 seconds ±0.1 second |
| The time of flame burning | 0~999.9 seconds ±0.1 second |
| Flame height | 10~75±2mm |
| Diameter of the test stick | 1/4 inch (6.35mm) *14 inches (305mm) |
| Test cover | Distance between each other: 24 inches (610mm) Height: 14 inches (305mm). Octagon angle iron: Upper and lower height 12.7*12.7mm |
| Flame height | The wire mesh is placed above the flame 38mm |
| Test the diameter of aluminum mesh | 0.010 Inch(0.25mm) 16 eyes*16 eyes |
| Octagonal stainless steel mesh | The distance between each opposite side is 2 fee (610mm). Octagonal mesh height 1 Fee (305mm) |
| Test the surface diameter of the round hole | For 102mm |
| Ignition device | Automatic ignition |
| Display mode | PLC.Touch screen + remote control |
| Control method | Remote control, fully automatic control of the test process |
| Requirements for combustion gas | High-purity liquefied petroleum gas (self-care) |
| Universal serial bus Port | Belt universal serial busInterface, test data can be exported |
| Auxiliary functions | Explosion-proof pressure relief device, smoke exhaust device |
){kind=link}