Advanced High Low Temperature Humidity Chamber for Climate Testing Equipment Analysis
Product Description
Discover the unparalleled excellence of Guangdong MENTEK Testing Equipment Co., Ltd's Advanced Temperature Humidity Chamber, a pinnacle of climate testing technology. This sophisticated chamber is engineered with precision to seamlessly conduct both high and low temperature evaluations on a vast array of electrical products, components, and materials. Venture into the realm of superior environmental simulation and reliability testing, where it enables stable or variable temperature transitions and comprehensive humidity assessments. Our humidity and heat test chambers, conforming to the highest Chinese national standards/T10586-2006 and T10592-2008, embody precision, quality, and reliability, setting an unprecedented standard in the industry.
| Model |
MHP-1000-CA |
| Inner box size |
W (width) 1000 Mm* H (high) 1000 Mm* D (deep) 1000 Mm |
| Outer box size |
W (width) 1250Mm* H (height) 2180Mm* D (Deep) 1950Mm |
| Effective volume |
About 1000L |
| Temperature range |
-40ºC to +150ºC/20% (limited temperature segment, see regional chart) to 98%RH. |
| Condition |
It refers to the air-cooled ambient temperature at +25ºC and the water-cooled temperature is +27ºC, No load (some parameters are according to the notes) when there is no sample |
| Temperature/humidity fluctuation |
≤±0.5ºC / ≤±2.5%RH. |
| Temperature/humidity deviation |
≤±2ºC /A) >75%RH.≤±2%RH) <75%RH.≤±5%RH. |
| Temperature uniformity |
±2ºC / ±3%RH. |
| The heating rate |
-40ºC rises to +85ºC, and the average nonlinear heating rate of the whole process is 5ºC/Min; |
| Cooling rate |
+85ºC drops to -40ºC, the average nonlinear cooling rate of the whole process is 5ºC/Min |
Noise |
Noise <75Decibel(The noise detection device is measured 1m away from the equipment gate). Noise reduction scheme:
1. The main noise sources, such as compressors, are equipped with vibration damping springs and vibration damping pads, which can reduce noise and reduce the cause.Vibration pair The destructive factors of the equipment prolong the service life of the equipment. The freezing pipe is fixed by a card clip, which effectively reducesLess vibration
Two. The inner wall of the refrigeration unit is made of high-quality sound-absorbing cotton, which can effectively reduce the noise effect of the refrigeration unit. 3. The compressor is connected to the pipe and the vibration-abering hose is installed. |
| Compressor |
1. Fully enclosed compressor
2. Frequency conversion technology of compressor + electronic expansion valve refrigerant flow QUANTITY SERVO CONTROL TECHNOLOGY |
| Refrigerant |
Non-fluorine environmental protectionHFC. R.404A/R23. |
| Condenser |
Air-cooled high-efficiency forced convection fin type |
| Outer box material |
Adopt high-quality fog surface line processingSUS.#304 stainless steel plate |
| Inner box material |
SUS.#304 mirror stainless steel plate, corrosion-resistant, all seams Continuous welding to ensure long-term trialThere is no leakage after inspection. |
| Controller |
High-precision resistive touch screen, availableUniversal serial busExternal mouse control; |
| Power supply voltage |
380VAC.(±10%), three-phase wire + protective ground wire, grounding.Resistance ≤4Ω; use 3P+N 40A air switch,Maximum power: about 15 Kilowatt |
SafeProtect |
Equipped with an explosion-proof pressure relief port, an explosion-proof chain is installed on the box door, and the observation window is equipped with an explosion-proof partition.
Optional smoke alarm, smoke exhaust pipe, video surveillance and fire extinguishing system. |
Relevant standard test requirements
Safety test of monomer battery:The temperature cycle test is meticulously conducted following these steps
1.1 Monomer battery is charged according to the 6.1.3 method.
1.2 The monomer battery is strategically placed within the precisely calibrated temperature chamber as per Table 1 and Figure 2, undergoing 5 cycles, with a detailed observation period of 1 hour.
| Temperature |
Time increment |
Cumulative time |
Rate of temperature change |
| ºC |
Min |
Min |
ºC/Min |
| 25 |
0 |
0 |
0 |
| -40 |
60 |
60 |
12/13 |
| -40 |
90 |
150 |
0 |
| 25 |
60 |
210 |
12/13 |
| 85 |
90 |
300 |
Two/three |
| 85 |
110 |
410 |
0 |
| 25 |
.70 |
480 |
6/7. |
Table 1 Temperature cycle test: Specifications of temperature and time for each cycle.
Battery module safety test:The temperature cycle test is meticulously conducted following these steps
1.1.1 The battery module is charged according to the 6.1.4 method.
1.1.2 The battery module is expertly positioned within the finely-tuned temperature chamber for 5 cycles as specified in Table 1 and Figure 2.Continuous and thorough observation is maintained for 1 hour.
The equipment adheres to the following industry-leading testing standards
Our equipment is fully compliant with these prestigious national standards: National Standard/T2423.1-2008 Test A for Low Temperature, National Standard/T4243.2-2008 Test B for High Temperature (Partial), National Standard/T2433.3-2006 Test Cab for Consistent Humidity and Heat, Chinese National Standard/T2423.4-2008 Test Decibel for Change and Damp Heat, and China National Standard/T2423.34-2012 Test Z/AnnoDominique. These standards confirm an exceptional range of temperature and humidity combinations, ensuring the equipment's outstanding performance capabilities.
Intricately designed structure of the testing chamber
Crafted with exceptional precision, the exterior of the test box is constructed with durable galvanized color steel plate, ensuring remarkable strength and longevity.
The inner boxes showcase superior craftsmanship with SUS304 stainless steel plates, featuring ingeniously adjustable hanging hole strips for exact test track positioning. Encased in a minimum of 10 cm of rigid polyurethane foam and glass wool, these insulation layers ensure optimal performance. The front doors, a triumph in engineering, are framed with premium electric wood chicken glass fiber board, providing superior low-temperature insulation, further enhanced by silicone foam sealing strips that endure a broad temperature range.
Efficient experimental space air circulation:
Ingeniously developed, the air supply system uses multi-blade aluminum wind turbines resilient to extreme temperatures. Powered by robust motors, air is precisely channeled to the upper louvers and returns from the bottom, maintaining a deviation of less than 2 ºC across the -70~100 ºC spectrum, aligning with international benchmarks at 10 points.
Advanced controller operating system
Our system incorporates an innovative and energy-efficient (8W) temperature and humidity control device, providing exceptional precision in temperature regulation with accuracy reaching an impressive ± 3 ºC.
1. High-resolution display screen:
Prepare to be mesmerized by our stunning 7-inch TET true color LCD resistive touch screen. This high-definition display boasts an impressive resolution of up to 800 * 480, offering an unrivaled visual experience.
2. Extensive Program Capacity: Unlock a universe of possibilities with this ingeniously designed testing chamber, capable of managing a multitude of complex configurations with absolute ease and precision.
This cutting-edge chamber is a powerhouse, with the capacity to handle up to 1000 programs and 1000 segments. Seamlessly manage up to 999 total and partial loops, and enjoy the flexibility of 10 sets of program linking functions. The real-time temperature curve display simplifies direct queries, enhancing convenience.
3. Expansive Data Storage Capacity: Embrace the vastness of data storage offered by this chamber, meticulously designed to meet all your data management needs effortlessly.
Easily access and transfer historical data across a magnificent span of 300 days of operation. With the ability to upload data via network cable or directly into the sophisticated controller, optimal data management is at your fingertips.
4. Seamless Connectivity: Enter a realm of efficiency and simplicity through our superior connectivity solutions, designed to streamline your operations.
Benefit from the simplicity of LAN standard Ethernet communication, supporting up to 16 devices with a single software setup. Effortlessly integrate the outflow interface into regional networks for remote program control, complete with real-time monitoring and historical curve playback for an enhanced user experience.
Sophisticated Heating and Humidification System: Delve into the nuances of this expertly crafted system, engineered for optimal performance.
Crafted with precision, the system uses bare wire nickel chromium alloy electric heating tubes for low thermal inertia and minimal heating overshoot. High-precision fluctuations are achieved through meticulously controlled power, delivering outstanding performance at every turn.
1. Cutting-edge Humidifier: Experience the epitome of humidification technology, designed for superior performance and reliability.
Our state-of-the-art humidification system utilizes the boiler method for remarkable consistency and uniformity. The surface humidification, using the water plate method, accelerates precision while eliminating impurities like scale. Enjoy outstanding performance at low humidity, with effortless maintenance and cleaning, all protected by a robust anti-dry burning controller within a seamless stainless steel casing.
2. Maximizing Water Efficiency and Energy Conservation: Embark on a sustainable journey towards resource conservation, achieving new benchmarks.
Featuring a generous 25L front-mounted water tank and quick-connection design, experience fast plug-in of water and electricity for easy disassembly and maintenance. Our innovative closed design significantly reduces water consumption while optimizing usage across three distinct humidity zones, adhering to national standards for high-temperature and humidity conditions.
Select equipment that consistently surpasses the most demanding testing conditions, delivering unmatched performance.
1. Optimal Circulating Air Mode Selection: Choose between the Courtyard Air Supply or Variable Speed Motor for unparalleled efficiency.
For precise wind speed control, our innovative solution offers strategic adaptability and precision, making it the ideal choice for your product's specific needs.
2. Optimal Water Supply System: Experience unparalleled purity and reliability with our RO Reverse Osmosis water supply, ensuring excellence at every level.
This automatic system provides a pure, consistent water supply through RO reverse osmosis, streamlining the humidification process, saving time, and guaranteeing unmatched purity and performance.
3. Advanced Polymer Film/Rotor Dehumidification System: Explore sophisticated solutions tailored to meet your specific dehumidification requirements.
Catering to stringent low-temperature and low-humidity demands, our advanced cellular chemical dehumidification system excels, offering outstanding performance and effortlessly meeting rigorous specifications.
4. LN.Two/ .LCO.2 LN.Two/ .LCO.2
Discover an exceptional collection of professional-grade products, sourced directly from esteemed manufacturers in Europe and the United States. Experience unmatched quality and reliability, expertly crafted to fulfill your every need with precision and care. LN.Two/ .LCO.2
Our state-of-the-art solenoid valves and integrated control systems are meticulously engineered to meet your rapid testing needs, delivering swift testing and precise temperature reduction. Trust our outstanding solutions to offer the excellence and precision you require in every testing scenario.
5. Ultrasonic Cooling and Humidification System: Take your testing to the next level with our cutting-edge system, designed to enhance performance and ensure reliability even under the most extreme conditions.
For rigorous testing under high heat and challenging humidity, our ultrasonic cooling and humidification system is crafted to excel beyond the toughest standards. As an auxiliary device, it assures optimal performance and reliability, safeguarding the integrity of your testing processes even in demanding environments.
6. Premium Glass Inner Door with Manual Operation Port: Discover convenience and safety with this premium feature, artfully crafted to enhance your user experience.
Designed for uninterrupted operations during frequent test object relocations, our chamber features a premium glass inner door with a practical manual operation port (∧ 125Mm * Ea.). This ingenious design reduces environmental impact from continual chamber access, effortlessly maintaining the integrity of your testing conditions.
7. State-of-the-Art Real-Time Test Data Recorder: Capture each detail with our precision recording solutions, ensuring that your data acquisition is both reliable and accurate.
When precise temperature measurements are paramount, our certified recording solutions are invaluable. The specialized tape recorder is expertly designed to fulfill all your data acquisition needs, offering unmatched accuracy and inspiring confidence in every recorded detail.
8. Cutting-Edge Computer Connectivity and Operation Recording Software: Elevate your convenience and functionality with our bespoke software solutions, crafted to transform your monitoring and data access experience.
Our custom-built connection software, tailored specifically for Mattel's environmental measuring machine kitchen, sets a new standard for convenience and functionality. It allows for simultaneous monitoring of multiple machines, offers seamless data access, and provides the most advanced electronic features, ensuring a superior operational experience.
Company Profile
Certifications
Ship to Client's Factory
Our Partners
Packaging & Shipping
){kind=link}