Battery Rapid Temperature Change Chamber for Reliable Results Mess Series Power Tester

Product Description

Battery Rapid Temperature Change Chamber for Reliable Results Mess Series Power Tester

Product Description

1. Temperature shock
1.1 The test objects are battery packs and systems.
1.2 The test object is placed in the alternating of (-40±2)ºC~(85±2)ºC. In the temperature environment,
The conversion time of the two extreme temperatures is within 30 minutes. The test subject is maintained for 8 hours in each extreme temperature environment and cycled 5 times. Observe at room temperature for 2 hours. 
1.3 Requirements: It is required that the battery pack or system has no leakage, shell rupture, fire or explosion and other phenomena. The insulation resistance value after the test is not less than 100Ω/V.    
2. Wet and hot cycle
2.1 The test objects are battery packs and systems.
2.2 Refer to GB/T2423 to perform test Dd, of which the highest temperature is +80ºC, and the number of cycles is 5 times.  At room temperature observe for 2h.

Main parameters

Model		MESS-225	MESS-408		MESS-1000
Performance parameters	Temperature range	-40-+150ºC (temperature change range: -20+80ºC): -70+150ºC (temperature change range: -55+80ºC
	Temperature fluctuation	±0.5ºC
	Temperature deviation	≤±2ºC
	Humidity deviation	±3%RH (<75%RH) ±5%RH (≤75%RH)
	The rate of temperature rise and fall	5ºC min
	Standard load	5kg aluminum ingot	12kg aluminum ingots		25kg aluminum ingots
Organization	Outer casing	High-strength cold-rolled steel plate double-sided fine powder baking paint
	Inner wall	SUS.#304 stainless steel 2B panel
	Insulation material	Glass fiber + polyurethane foam
Refrigeration system	Refrigeration method	Single-stage mechanical refrigeration/superimposed two-stage compressor refrigeration method
	Chiller	Imported compressors
Heater		Electric heating wire heater
Observation window (mm)		300*400/400*600
Test hole (mm)		One 50 on the left		One 100 on the right
Temperature sensor		Platinum resistance pt100
Controller		Original Japanese imported 7 Cun TFT. Touch screen
Recording device		Built-in paperless recorder function (external printing available)
Computer interface		UCB Interface connection operation
Internal size (cm)	Wide	60	80		100
	Tall	50	85		100
	Deep	75	60		100
Motor cover height		190	210		220
Power supply		Audio-visual380V 50Hz. Sanxiang Wire Control + Grounding Wire
Standard configuration		1 copy of the product instruction manual. 1 copy of the experimental report, 1 copy of the qualification certificate and 1 copy of the quality assurance certificate, 2 partitions, a set of silicone rubber soft plugs
Meet the configuration		China National Standard 11158\GBT.2423\GC./T2423.1/T2423.2/GBT.24423.2GJB.1500.3\GJB.15.0

Note:
1. The external size is determined by the rising and lowering temperature rate
2. Water-cooled type (water temperature 10-28ºC, water pressure 0.1-0.3Mpa, in order to ensure cooling performance)
3. It can increase the wet and hot function
4. Optional dry air blowing system
5. Optional liquid nitrogen function (30ºC/minute)
6. The above load is a standard load and can be designed according to customer requirements.
 

Company Profile

Certifications

Ship to Client's Factory

 

Our Partners

Packaging & Shipping